CP1W-EIP01-US CP1 EtherNet/IP Adapter Low Cost EtherNet/IP Slave Adapter for CP1 Series Micro PLCs The CP1W-EIP01-US is a low cost adapter that allows EtherNet/IP communications for the CP1H and CP1L PLCs with an available option board slot. The addition of an EtherNet/IP option board turns the PLC into an Intelligent Slave that easily connects to an EtherNet/IP Master for control & monitoring data. Key Features and Benefits Easy Mounting - The adapter mounts in an unused Option Board Slot of the CP1 PLC Slave connections The CP1W-EIP01-US turns a CP1 PLC into an Intelligent EtherNet/IP Slave that shares information using Data Link (Implicit Messaging). The CP1 must be connected to an EtherNet/IP Master for data sharing. Intelligent Slave Each PLC is a powerful motion controller* (CP1H - 4 Axis, CP1L 2 Axis) with high speed interrupts, Real Time Clock, IEC61131-3 Programming, PID, Floating Point Math and is expandable with analog or digital I/O. The addition of an EtherNet/IP option board turns the PLC into an Intelligent Slave. *Transistor models ControlLogix & CompactLogix Connect Easily connect Rockwell EtherNet/IP Master to the CP1 with EtherNet/IP adapter Typical System Configuration EtherNet/IP Slave Nodes (up to 128) EtherNet/IP EtherNet/IP Switch Switch EtherNet/IP Master Specification Part Number Description CP1W-EIP01-US CP1 EtherNet/IP Slave Adapter Type 100Base-TX (Can be used as 10Base-T) Applicable PLCs CP1L-L14, CP1L-L20, CP1L-M30, CP1L-M40, CP1L-M60, CP1H Transmission Distance 100 m (distance between hub and node) Number of units mounted One (either port can be used) (a CP1W-ETN01-US can also be mounted in an open slot) Communication Method EtherNet/IP Max connections per device One connection (ie: EtherNet/IP Master to EtherNet/IP Slave) Data Link Set-up 10/50/100 Words - Produced data D1000-D1099, Consumed data D1100-D1199 Current IP Address D1200, D1201 (D1200=1st & 2nd Octets in Hex, D1201=3rd & 4th Octets in Hex) Default IP Address 192.168.250.11 Web Page IP Address Set-up Intelligent EtherNet/IP Slave In the above example the CP1H PLC communicates to the CJ/CS via EtherNet/IP. The CP1H PLC can control 4 axis of servo motors while also reading 4 high speed encoder inputs. An additional option port can be added for communications to AC Drives, Temperature Controllers, or other devices. Built into the CPU are 24 Digital In, 16 Digital Out and 6 Analog I/O (4 configurable analog inputs & 2 configurable analog outputs). The PLC is expandable up to 320 digital I/O along with 2 CJ Special I/O modules (Analog, Motion, RFID, Network or Communication cards). Additional literature can be obtained from www.omron247.com. W450 - CP1H Operation Manual W451 - CP1L / CP1H Programming Manual W462 - CP1L Operation Manual W465 - CJ / CS EtherNet/IP Operation Manual W472 - CJ2 Hardware Manual W473 - CJ2 Software Manual W452 - NSJ Operation Manual V227 - W4S EtherNet/IP Switch OMRON ELECTRONICS LLC THE AMERICAS HEADQUARTERS Schaumburg, IL USA 847.843.7900 800.556.6766 www.omron247.com OMRON CANADA, INC. HEAD OFFICE OMRON ARGENTINA SALES OFFICE Toronto, ON, Canada 416.286.6465 866.986.6766 www.omron247.com Cono Sur 54.11.4783.5300 OMRON ELETRNICA DO BRASIL LTDA HEAD OFFICE OMRON CHILE SALES OFFICE So Paulo, SP, Brasil 55.11.2101.6300 www.omron.com.br Santiago 56.9.9917.3920 OMRON ELECTRONICS MEXICO SA DE CV HEAD OFFICE OTHER OMRON LATIN AMERICA SALES Apodaca, N.L. 52.811.156.99.10 001.800.556.6766 mela omron.com 54.11.4783.5300 Cat. No. P062I-E-01 10/09 Specifications are subject to change without notice. 2009 Omron Electronics LLC