D2FD Dust Proof Ultra Subminiature Basic Switch Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable spring. Models for micro loads are also available. Solder and PCB terminals are available. RoHS Compliant Model Number Legend D2FD- -1 12 3 1. Rating 3. Terminals 2 : 2 A at 125 VAC / 30 VDC H : Solder terminals 01 : 0.1 A at 125 VAC / 30 VDC T : PCB terminals 2. Actuater L0 : Pin plunger L1 : Hinge lever L30 : Simulated roller lever List of Models Ratings 2 A 0.1 A Actuator Terminals Pin plunger Solder terminals D2FD-2L0-1H D2FD-01L0-1H PCB terminals D2FD-2L0-1T D2FD-01L0-1T Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H PCB terminals D2FD-2L1-1T D2FD-01L1-1T Simulated roller lever (R2.5) Solder terminals D2FD-2L30-1H D2FD-01L30-1H PCB terminals D2FD-2L30-1T D2FD-01L30-1T Contact Form SPDT COM NO NC 1D2FD Dust Proof Ultra Subminiature Basic Switch Contact Specifications Item Model D2FD-2 models D2FD-01 models Specification Crossbar Contact Material Silver alloy Gold alloy Gap (standard value) 0.25 mm Minimum applicable load (see note) 100 mA at 5 VDC 1 mA at 5 VDC Note: For more information on the minimum applicable load, refer to Using Micro Loads. Ratings D2FD-2 models D2FD-01 models Model Rated voltage Resistive load 125 VAC 2 A 0.1 A 30 VDC 2 A 0.1 A Note: The rating values apply under the following test conditions. 1. Ambient temperature: 20 2C 2. Ambient humidity: 65 5% 3. Operating frequency: 20 operations/min Characteristics Item Model D2FD-2 models D2FD-01 models Operating speed 1 mm to 500 mm/s Mechanical 120 operations/min max. Operating frequency Electrical 20 operations/min max Insulation resistance 100 M min. (at 500 VDC) Contact resistance (initial value) 30 m max. 100 m max. 600 VAC 50/60 Hz 1 min between terminals of same polarity Dielectric strength (see note 2) 1,500 VAC 50/60 Hz 1 min between current carrying metal parts and ground 1,500 VAC 50/60 Hz 1 min between each terminal and non-current carrying metal part Vibration resistance (see note 3) Malfunction 10 to 55 Hz, 1.5 mm double amplitude 2 Destruction 1,000 m/s max. Shock resistance (see note 3) 2 Malfunction 300 m/s max. Mechanical 300,000 operations min. (at 60 ops./min.) Durability (see note 4) Electrical 30,000 operations min. (at 20 ops./min.) 100,000 operations min. (at 20 ops./min.) Degree of protection IP6X Ambient operating temperature 20 to +70C (at 60%RH max.) (with no icing) Ambient operation humidity 85%RH max. (for +5 to +35C) Weight Approx. 0.7 g (pin plunger, PCB terminal models) Note: 1. The data given above are initial values. 2. The dielectric strength shown in the table indicates a value for models with a Separator. 3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values apply at the total travel position. Contact opening or closing time is within 1 ms. 4. Consult your OMRON sales representative for testing conditions. Terminals (Unit: mm) PCB Mounting Dimensions Solder Terminals PCB Terminals (Reference) 0.05 Three, 1.2 Dia. 0.1 +0.1 2.5 +0.12 2.4 0.05 Dia. 0.15 5 Two,1.2 0 Dia. 5.080.1 5.080.1 1.10.12 +0.1 2.4 0.05 1.7 1.6 5.5 1.5 1.50.1 5.7 2 1.50.12 0.4 Three, R0.8 1.2 0.1 0.9 1.250.12 3.15 6.5 0.5 2.2 5.080.15 5.080.15 4.4 0.4 0.15 6 4.80.1 12.8 4 0.15 5.08 5.080.15 4.4 12.80.15 6 Mounting Holes (Unit: mm) Solder Terminals Two, M2.3 0.1 4.8 2