Snap Action Switch D2F Subminiature Snap Action Switch Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads(microvoltage/ microcurrent) Long life span assured by high-precision dual spring reverse-action mechanism Flux penetration prevented by using an insert terminal and allowing a height difference at the case bottom Ideal for a wide range of applications including appliances, office equipment, audio and communications equipment RoHS Compliant Ordering Information Actuator Contact Model Contact Model type OF Terminal type Self- Compact PCB supporting Solder Solder Right-angle Left-angle Pin plunger Microvoltage/ Low force 75 g D2F-01F D2F-01F-T D2F-01F-D3D2F-01F-D D2F-01F-A D2F-01F-A1 current Standard 150 g D2F-01 D2F-01-T D2F-01-D3 D2F-01-D D2F-01-A D2F-01-A1 General- Low force 75 g D2F-F D2F-F-T D2F-F-D3 D2F-F-D D2F-F-A D2F-F-A1 purpose Standard 150 g D2F D2F-T D2F-D3 D2F-D D2F-A D2F-A1 Hinge lever Microvoltage/ Low force 25 g D2F-01FL D2F-01FL-T D2F-01FL-D3 D2F-01FL-D D2F-01FL-A D2F-01FL-A1 current Standard 80 g D2F-01L D2F-01L-T D2F-01L-D3 D2F-01L-D D2F-01L-A D2F-01L-A1 General- Low force 25 g D2F-FL D2F-FL-T D2F-FL-D3 D2F-FL-D D2F-FL-A D2F-FL-A1 purpose Standard 80 g D2F-L D2F-L-T D2F-L-D3 D2F-L-D D2F-L-A D2F-L-A1 Simulated Microvoltage/ Low force 40 g D2F-01FL3 D2F-01FL3-T D2F-01FL3-D3 D2F-01FL3-D D2F-01FL3-A D2F-01FL3-A1 roller lever current Standard 80 g D2F-01L3 D2F-01L3-T D2F-01L3-D3 D2F-01L3-D D2F-01L3-A D2F-01L3-A1 General- Low force 40 g D2F-FL3 D2F-FL3-T D2F-FL3-D3 D2F-FL3-D D2F-FL3-A D2F-FL3-A1 purpose Standard 80 g D2F-L3 D2F-L3-T D2F-L3-D3 D2F-L3-D D2F-L3-A D2F-L3-A1 Roller lever Microvoltage/ Low force 40 g D2F-01FL2 D2F-01FL2-T D2F-01FL2-D3 D2F-01FL2-D D2F-01FL2-A D2F-01FL2-A1 current Standard 80 g D2F-01L2 D2F-01L2-T D2F-01L2-D3 D2F-01L2-D D2F-01L2-A D2F-01L2-A1 General- Low force 40 g D2F-FL2 D2F-FL2-T D2F-FL2-D3 D2F-FL2-D D2F-FL2-A D2F-FL2-A1 purpose Standard 80 g D2F-L2 D2F-L2-T D2F-L2-D3 D2F-L2-D D2F-L2-A D2F-L2-A1 Model Number Legend D2F- 1 2 3 4 1. Ratings 3. Actuator 4. Terminals None: General loads None: Pin plunger None: PCB terminals/straight terminals 01: Micro loads (0.1 A at 30 VDC) L: Hinge lever -T: Self-clinching PCB terminals L2: Hinge roller lever -A: Right-angled PCB terminals 2. Maximum Operating Force L3: Simulated roller lever -A1: Left-angled PCB terminals None: 1.47 N 150 gf -D3: Solder terminals F: 0.74 N 75 gf -D: Compact solder terminals Note: These OF values are for the pin plunger models. Snap Action Switch D2F 31Specifications Characteristics Operating speed 1 to 500 mm/second (pin plunger models) Operating frequency Mechanical: 200 operations per minute max. Electrical: 30 operations per minute max. Contact resistance General Purpose: 30 m max. (Standard force versions) 50 m max. (Low force versions) Microload: 100 m max. Insulation resistance 100 M min. at 500 VDC Dielectric strength (See note 2) 600 VAC, 50/60 Hz for 1 minute between terminals of same polarity 1,500 VAC, 50/60 Hz for 1 minute between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts Vibration resistance (See note 3) Malfunction: 10 to 55 Hz, 1.5 mm double amplitude 2 Shock resistance (See note 3) Destruction: 1,000 m/s (approx. 100G) max. 2 Malfunction: 300 m/s (approx. 30 g min.) max. Degree of protection IEC IP40 Degree of protection against Class I electric shock Proof tracking index (PTI) 175 Ambient operating temperature -25 to 65C (at 60% RH) with no icing Ambient operating Humidity 85% max. (for 5 to 35C) Service life Mechanical: 1 million operations min. at 60 operations/minute. (Consult Omron for test conditions) Electrical: 30,000 operations min. at 30 operations/minute. Weight Approx. 0.5 g (pin plunger models) Note: 1. Data shown are of initial value. 2. The dielectric strength shown in the table indicates a value for models with a separator. 3. For pin plunger models, the values are measured at the free position and total travel position. For the lever models, they are measured at the total travel position. Ratings Rated Voltage Resistive load Microvoltage/current (D2F-01 models) General-purpose (D2F models) Low force Standard Low force Standard 125 VAC 1 A 3 A 30 VDC 0.1 A 0.1 A 0.5 A 2 A Note: 1. When using an inductive load or motor load, consult OMRON. 2. The ratings apply under the following test conditions: Ambient Temperature = 202C, Ambient Humidity = 655%, Operating frequency = 30 operations/min. Approvals Contact Specifications Contact Omron to obtain standards approvals on specific models. Item D2F D2F-01 UL Recognized, CSA Certified Specification Crossbar Material Silver alloy Gold alloy D2F Gap 0.25 mm D2F-01 Standard Low Force (Standard value) Rated voltage Force Minimum Applicable Load 100 mA at 5 VDC 1 mA at 5VDC 125 VAC 3 A 1A - - - (See note) 30 VDC 2 A 0.5 A 0.1 A Note: Minimum applicable loads are indicated by N standard Note: The rated values approved by each of the safety standards reference values. This value represents the failure rate at a (e.g.UL,CSA) may be different from the performance character- 60% ( ) reliability level (JIS C5003). 60 istics individually defined in this catalog. -6 The equation =0.5 x 10 /operations indicates that a failure 60 rate of 1/2,000,000 operations can be expected at a reliability level of 60%. 32 Snap Action Switch D2F