- D2FW-G M4 Mounting Sealed Basic Switch Easy to mount with one single screw. A sealed switch ideal for use in adverse environment conditions D Single-point mounting with an M4 screw. 2 Incorporates a fixed leaf lever for tough F W environments. G Molded lead wires are installed using lead-free connections for environmental conservation. RoHS Compliant Model Number Legend 1 23 D2FW-G M 1. Ratings 3. Contact form 2 : 30 VDC 1A 1 : SPDT 0 : 30 VDC 0.1A 2 : SPST-NC 3 : SPST-NO 2. Levers 7 : Leaf lever 8 : Long leaf lever List of Models Ratings 1 A 0.1 A Actuator Contact form SPDT D2FW-G271M D2FW-G071M Leaf lever SPST-NC D2FW-G272M D2FW-G072M SPST-NO D2FW-G273M D2FW-G073M SPDT D2FW-G281M D2FW-G081M Long leaf lever SPST-NC D2FW-G282M D2FW-G082M SPST-NO D2FW-G283M D2FW-G083M Contact form Contact Specifications Item Model D2FW-G2 models D2FW-G0 models SPDT SPST-NC SPST-NO Specification Crossbar Contact Material Silver alloy Gold alloy Gap (standard value) 0.25 mm Minimum applicable load 5 VDC 100 mA 5 VDC 1 mA COM NO NC COM NC COM NO (reference value) * (Black) (Blue) (Black) (Blue) (Red) (Black) (Red) * Please refer toUsing Micro Load inPrecaution for more The color in parentheses information on the minimum applicable load. indicates the color of the lead wire. Ratings Model D2FW-G2 models D2FW-G0 models Rated voltage Resistive load 30 VDC 1 A 0.1 A Note. The above rating values apply under the following test conditions. (1) Ambient temperature: 202C (2) Ambient humidity: 655% (3) Operating frequency: 20 operations/min 1- D2FW-G M4 Mounting Sealed Basic Switch Characteristics Mounting Holes (Unit: mm) Item Model D2FW-G2 models D2FW-G0 models M4 Tap Permissible operating speed 1mm to 500mm/s Mechanical 120 operations/min Permissible 16 operating frequency +0.1 Electrical 30 operations/min 4 dia. holes 0 (depth: 2mm min.) Insulation resistance 100 M min. (at 500 VDC with insulation tester) Contact resistance (initial value) 100 m max. 150 m max. Between terminals of the same 600 VAC 50/60 Hz for 1 min polarity D Between current-carrying metal Dielectric strength 1,500 VAC 50/60 Hz for 1 min 2 parts and ground F Between each terminal and W 1,500 VAC 50/60 Hz for 1 min non-current-carrying metal parts G Vibration resistance Malfunction 10 to 55 Hz, 1.5 mm double amplitude * 1 2 Durability 1,000 m/s approx. 100G max. Shock resistance 2 Malfunction * 1 300 m/s approx. 30G max. Mechanical 300,000 operations min. (60 operations/min) Durability * 2 30,000 operations min. 100,000 operations min. Electrical (20 operations/min) (20 operations/min) Degree of protection IEC IP67 -40C to +85C (at ambient humidity 60% max.) Ambient operating temperature (with no icing or condensation) Ambient operating humidity 95% max. (for +5C to +35C) Weight Approx. 10.4 g (for SPDT model) Note. The data given above are initial values. *1. The values are at Free Position and Total Travel Position values for pin plunger, and Total Travel Position value for lever. Close or open circuit of the contact is 1ms max. *2. For testing conditions, consult your OMRON sales representative. Dimensions (Unit: mm) /Operating Characteristics The is replaced with the code for the ratings and the contact forms. See theList of Model for available combinations of shapes. Leaf lever D2FW-G 7 M 228 22.8 t0.2 Stainless-steel lever Leaf lever Type A 0.15 16 5 Model Operating Characteristics D2FW-G 7 M +0.2 Operating Force OF Max. 2.45N 250 gf 4.2 dia. Free 0 0 Position Releasing Force RF Min. 0.29N 30 gf 4 dia. 0.15 Operating Overtravel OT Min. 1.0 mm Position 5 D2FW G Movement Differential MD Max. 1.0 mm +0.2 4 dia. 0 13.5 Free Position FP Max. 15.5 mm Operating Position OP 11.52 mm Total Travel Position TTP 6.5 mm (reference value) R3.5 30010 Lead wire 5 COM AVS0.5 (Black) NO AVS0.5 (Blue) 15.3 NC AVS0.5 (Red) 4.7 23.5 Long leaf lever D2FW-G 8 M 19 228 t0.2 Stainless-steel lever Long leaf lever Type Operating A 160.15 5 Model Characteristics D2FW-G 8 M Operating Force OF Max. 2.94N 300 gf +0.2 Releasing Force RF Min. 0.59N 60 gf Free 4.2 dia. 0 Position 0 Overtravel OT Min. 1.0 mm 4 dia. 0.15 Operating Movement Differential MD Max. 1.0 mm Position 5 +0.2 D2FW G Free Position FP Max. 19 mm 4 dia. 0 13.5 Operating Position OP 122 mm Total Travel Position TTP 8.5 mm (reference value) R3.5 10 300 Lead wire 5 COM AVS0.5 (Black) NO AVS0.5 (Blue) 15.3 NC AVS0.5 (Red) 4.7 23.5 Note1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. Note2. The operating characteristics are for operation in the A direction ( ). 2