D2RV
Miniature Basic Switch
High Reliability for Micro Load
Applications, Even in Adverse
Atmospheres (Dust, High
Humidity, Silicon Gas, etc.)
D
The reed switch offers exceptional contact
2
reliability in micro load applications.
R
V
Same mounting pitch as for the V Miniature Basic
Switch.
High durability with a bounce time of 1 ms max.
RoHS Compliant
Model Number Legend Contact Form
SPST-NO
12
D2RV-
@@
Reed switch
1. Actuator
NO
None : Pin plunger model
COM
L11 : Short hinge lever
L : Hinge lever
Ratings
L13 : Simulated roller lever
L22 : Short hinge roller lever
Switching voltage 100 VDC (max.)
Switching current 0.25 ADC (max.)
L2 : Hinge roller lever
Contact capacity 10 WDC (max.)
2. Maximum Operating Force (OF)
Note. The above rating values apply under the following test conditions.
None : 0.49 N {50 gf}
(1) Ambient temperature: 202C
(2) Ambient humidity: 655%
E : 0.25 N {25 gf}
(3) Operating frequency: 30 operations/min
(for pin plungers only)
G : 0.98 N {100 gf}
Characteristics
Note. These values are for the pin plunger models.
Permissible operating speed 0.1mm to 1 m/s (for pin plunger models)
List of Models Permissible
Mechanical 200 operations/min
operating
Electrical 200 operations/min
frequency
Maximum
Insulation resistance 100 M min. (at 500 VDC with insulation tester)
Operating Model
Actuator
Force (OF)
Contact resistance (initial value) 150 m max.
Pin 0.25 N {25 gf} D2RV-E
Between terminals of
200 VDC 1 min
plunger
0.49 N {50 gf} D2RV the same polarity
Between current-
0.98 N {100 gf} D2RV-G
Dielectric carrying metal parts and 500 VAC 50/60 Hz for 1 min
Short hinge 0.49 N {50 gf} D2RV-L11
strength * 1 ground
lever
0.98 N {100 gf} D2RV-L11G
Between each terminal
Hinge lever 0.25 N {25 gf} D2RV-L
and non-current- 500 VAC 50/60 Hz for 1 min
0.49 N {50 gf} D2RV-LG
carrying metal parts
Simulated
0.25 N {25 gf} D2RV-L13 Vibration
Malfunction 10 to 55 Hz, 1.5 mm double amplitude
roller lever
resistance * 2
0.49 N {50 gf} D2RV-L13G
2
Destruction 500 m/s {approx. 50G} max.
Shock
Short hinge
0.49 N {50 gf} D2RV-L22 2
resistance
Malfunction * 2 200 m/s {approx. 20G} max.
roller lever
Mechanical 10,000,000 operations min. (60 operations/min)
0.98 N {100 gf} D2RV-L22G
Durability * 3
Electrical 3,000,000 operations min. (30 operations/min)
Hinge roller
0.25 N {25 gf} D2RV-L2
Degree of protection IEC IP40
lever
0.49 N {50 gf} D2RV-L2G
10C to +60C (at ambient humidity of 60% max.)
Ambient operating temperature
(with no icing or condensation)
Ambient operating humidity 80% max. (for +5C to +35C)
Weight Approx. 7g (for pin plunger models)
Note. The data given above are initial values.
*1. The values for dielectric strength shown are for models with a Separator
(refer toBasic Switch Common Accessorie).
*2. For the pin plunger models, the above values apply for use at the free
position and total travel position. For the lever models, they apply at the
total travel position. Close or open circuit of the contact is 1ms max.
*3. For testing conditions, consult your OMRON sales representative.
Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately) Refer toBasic Switch Common Accessorie
1D2RV Miniature Basic Switch
Terminals/Appearances (Unit:mm) Mounting Holes (Unit: mm)
6.3
2-3.1 dia. mounting holes
t=0.5
or M3 screw holes
3.2
2-Solder terminals
4.8
0.1
10.3
2.4 dia. 1.3 dia.
0.1
22.2
15.9
5.4
D
1
2
(10)
R
V
Dimensions (Unit: mm) /Operating Characteristics
Pin Plunger
A
D2RV-E 5.15
0.25 Model
20.2
+0.13
R1.5 Operating D2RV-E D2RV D2RV-G
D2RV PT 2.8 3.1 dia. holes
0.03
4.3
characteristics
D2RV-G
0.25 N 0.49 N 0.98 N
Operating Force OF Max.
OP
10.30.1 15.9 {25 gf} {50 gf} {100 gf}
5.4
Pretravel PT Max. 1.6 mm
2.8
Overtravel OT Min. 0.6 mm
+0.13
0.15
3.1 3.4 dia. 10.3
0.03
Movement Differential MD Max. 0.8 mm
0.1
22.2 1
2.8
27.8 Operating Position OP 14.40.6 mm
(10)
Short Hinge Lever
D2RV-L11
5.15
Model
22.1
8.1
D2RV-L11G A +0.13
PT
3.1 dia. holes Operating D2RV-L11 D2RV-L11G
t=0.5 *
0.03
4.3
characteristics
0.49 N 0.98 N
OP Operating Force OF Max.
0.1 {50 gf} {100 gf}
10.3 15.9
5.4
Pretravel PT Max. 1.8 mm
2.8
Overtravel OT Min. 0.4 mm
+0.13
3.1 0.15 dia.
3.4 10.3
0.03
Movement Differential MD Max. 1.0 mm
22.20.1
1
2.8
27.8 Operating Position OP 15.00.6 mm
* Stainless-steel lever
(10)
Hinge Lever Models
D2RV-L
5.15
0.8 Model
35.6
A
PT
8.1
D2RV-LG +0.13
t=0.5 * 3.1 dia. holes Operating D2RV-L D2RV-LG
0.03
4.3
characteristics
0.25 N 0.49 N
OP
Operating Force OF Max.
0.1
10.3 15.9 {25 gf} {50 gf}
5.4
Pretravel PT Max. 4.0 mm
2.8
+0.13 Overtravel OT Min. 1.0 mm
0.15 dia.
3.1 3.4 10.3
0.03
Movement Differential MD Max. 1.6 mm
0.1
22.2 1
2.8
27.8
* Stainless-steel lever Operating Position OP 14.41.2 mm
(10)
Simulated Roller Lever Models
D2RV-L13 R3.5
t=0.5 * 5.15 Model
D2RV-L13G PT A 0.8
32.6 Operating D2RV-L13 D2RV-L13G
8.1
4.3
+0.13
characteristics
3.1 dia. holes
0.03
0.25 N 0.49 N
Operating Force OF Max.
{25 gf} {50 gf}
OP
0.1
10.3 15.9 Pretravel PT Max. 4.0 mm
5.4
Overtravel OT Min. 1.0 mm
2.8
Movement Differential MD Max. 1.6 mm
+0.13
0.15 dia.
3.1 3.4 10.3
0.03
0.1 Operating Position OP 18.11.2 mm
22.2 1
2.8
27.8
* Stainless-steel lever
(10)
Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
2