D2RV Miniature Basic Switch High Reliability for Micro Load Applications, Even in Adverse Atmospheres (Dust, High Humidity, Silicon Gas, etc.) D The reed switch offers exceptional contact 2 reliability in micro load applications. R V Same mounting pitch as for the V Miniature Basic Switch. High durability with a bounce time of 1 ms max. RoHS Compliant Model Number Legend Contact Form SPST-NO 12 D2RV- Reed switch 1. Actuator NO None : Pin plunger model COM L11 : Short hinge lever L : Hinge lever Ratings L13 : Simulated roller lever L22 : Short hinge roller lever Switching voltage 100 VDC (max.) Switching current 0.25 ADC (max.) L2 : Hinge roller lever Contact capacity 10 WDC (max.) 2. Maximum Operating Force (OF) Note. The above rating values apply under the following test conditions. None : 0.49 N 50 gf (1) Ambient temperature: 202C (2) Ambient humidity: 655% E : 0.25 N 25 gf (3) Operating frequency: 30 operations/min (for pin plungers only) G : 0.98 N 100 gf Characteristics Note. These values are for the pin plunger models. Permissible operating speed 0.1mm to 1 m/s (for pin plunger models) List of Models Permissible Mechanical 200 operations/min operating Electrical 200 operations/min frequency Maximum Insulation resistance 100 M min. (at 500 VDC with insulation tester) Operating Model Actuator Force (OF) Contact resistance (initial value) 150 m max. Pin 0.25 N 25 gf D2RV-E Between terminals of 200 VDC 1 min plunger 0.49 N 50 gf D2RV the same polarity Between current- 0.98 N 100 gf D2RV-G Dielectric carrying metal parts and 500 VAC 50/60 Hz for 1 min Short hinge 0.49 N 50 gf D2RV-L11 strength * 1 ground lever 0.98 N 100 gf D2RV-L11G Between each terminal Hinge lever 0.25 N 25 gf D2RV-L and non-current- 500 VAC 50/60 Hz for 1 min 0.49 N 50 gf D2RV-LG carrying metal parts Simulated 0.25 N 25 gf D2RV-L13 Vibration Malfunction 10 to 55 Hz, 1.5 mm double amplitude roller lever resistance * 2 0.49 N 50 gf D2RV-L13G 2 Destruction 500 m/s approx. 50G max. Shock Short hinge 0.49 N 50 gf D2RV-L22 2 resistance Malfunction * 2 200 m/s approx. 20G max. roller lever Mechanical 10,000,000 operations min. (60 operations/min) 0.98 N 100 gf D2RV-L22G Durability * 3 Electrical 3,000,000 operations min. (30 operations/min) Hinge roller 0.25 N 25 gf D2RV-L2 Degree of protection IEC IP40 lever 0.49 N 50 gf D2RV-L2G 10C to +60C (at ambient humidity of 60% max.) Ambient operating temperature (with no icing or condensation) Ambient operating humidity 80% max. (for +5C to +35C) Weight Approx. 7g (for pin plunger models) Note. The data given above are initial values. *1. The values for dielectric strength shown are for models with a Separator (refer toBasic Switch Common Accessorie). *2. For the pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, they apply at the total travel position. Close or open circuit of the contact is 1ms max. *3. For testing conditions, consult your OMRON sales representative. Separator (Sold Separately), Actuator (Sold Separately), Terminal Connector (Sold Separately) Refer toBasic Switch Common Accessorie 1D2RV Miniature Basic Switch Terminals/Appearances (Unit:mm) Mounting Holes (Unit: mm) 6.3 2-3.1 dia. mounting holes t=0.5 or M3 screw holes 3.2 2-Solder terminals 4.8 0.1 10.3 2.4 dia. 1.3 dia. 0.1 22.2 15.9 5.4 D 1 2 (10) R V Dimensions (Unit: mm) /Operating Characteristics Pin Plunger A D2RV-E 5.15 0.25 Model 20.2 +0.13 R1.5 Operating D2RV-E D2RV D2RV-G D2RV PT 2.8 3.1 dia. holes 0.03 4.3 characteristics D2RV-G 0.25 N 0.49 N 0.98 N Operating Force OF Max. OP 10.30.1 15.9 25 gf 50 gf 100 gf 5.4 Pretravel PT Max. 1.6 mm 2.8 Overtravel OT Min. 0.6 mm +0.13 0.15 3.1 3.4 dia. 10.3 0.03 Movement Differential MD Max. 0.8 mm 0.1 22.2 1 2.8 27.8 Operating Position OP 14.40.6 mm (10) Short Hinge Lever D2RV-L11 5.15 Model 22.1 8.1 D2RV-L11G A +0.13 PT 3.1 dia. holes Operating D2RV-L11 D2RV-L11G t=0.5 * 0.03 4.3 characteristics 0.49 N 0.98 N OP Operating Force OF Max. 0.1 50 gf 100 gf 10.3 15.9 5.4 Pretravel PT Max. 1.8 mm 2.8 Overtravel OT Min. 0.4 mm +0.13 3.1 0.15 dia. 3.4 10.3 0.03 Movement Differential MD Max. 1.0 mm 22.20.1 1 2.8 27.8 Operating Position OP 15.00.6 mm * Stainless-steel lever (10) Hinge Lever Models D2RV-L 5.15 0.8 Model 35.6 A PT 8.1 D2RV-LG +0.13 t=0.5 * 3.1 dia. holes Operating D2RV-L D2RV-LG 0.03 4.3 characteristics 0.25 N 0.49 N OP Operating Force OF Max. 0.1 10.3 15.9 25 gf 50 gf 5.4 Pretravel PT Max. 4.0 mm 2.8 +0.13 Overtravel OT Min. 1.0 mm 0.15 dia. 3.1 3.4 10.3 0.03 Movement Differential MD Max. 1.6 mm 0.1 22.2 1 2.8 27.8 * Stainless-steel lever Operating Position OP 14.41.2 mm (10) Simulated Roller Lever Models D2RV-L13 R3.5 t=0.5 * 5.15 Model D2RV-L13G PT A 0.8 32.6 Operating D2RV-L13 D2RV-L13G 8.1 4.3 +0.13 characteristics 3.1 dia. holes 0.03 0.25 N 0.49 N Operating Force OF Max. 25 gf 50 gf OP 0.1 10.3 15.9 Pretravel PT Max. 4.0 mm 5.4 Overtravel OT Min. 1.0 mm 2.8 Movement Differential MD Max. 1.6 mm +0.13 0.15 dia. 3.1 3.4 10.3 0.03 0.1 Operating Position OP 18.11.2 mm 22.2 1 2.8 27.8 * Stainless-steel lever (10) Note 1. Unless otherwise specified, a tolerance of 0.4 mm applies to all dimensions. Note 2. The operating characteristics are for operation in the A direction ( ). 2