Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof or in temporary water- proof environments (IEC IP67). Switch rating of 2A at 250 VAC possible with a single-leaf movable spring. Models for micro loads are also available. Solder, quick-connect terminals ( 110), PCB ter- minals and molded lead wires are available. Even-pitched PCB terminals are also standard- ized. RoHS Compliant Ordering Information Model Number Legend D2SW-P 1 2 3 4 1. Ratings 2: 2A at 250 VAC 01: 0.1A at 30 VDC 2. Actuator None: Pin plunger L1: Hinge lever L2: Hinge roller lever L3: Simulated roller lever 3. Contact Form None: SPDT -2: SPST-NC (Molded lead wire models only) -3: SPST-NO (Molded lead wire models only) 4. Terminals H : Solder terminals D : PCB terminals (Uneven pitch) T : Quick-connect terminals ( 110) M: Molded lead wires 1D2SW-P D2SW-P List of Models Terminal Solder terminals PCB terminals Quick-connect terminals Molded lead wires ( 110) Rating Actuator 2A Pin plunger D2SW-P2H D2SW-P2D D2SW-P2T D2SW-P2M Hinge lever D2SW-P2L1H D2SW-P2L1D D2SW-P2L1T D2SW-P2L1M Hinge roller le- D2SW-P2L2H D2SW-P2L2D D2SW-P2L2T D2SW-P2L2M ver Simulated roll- D2SW-P2L3H D2SW-P2L3D D2SW-P2L3T D2SW-P2L3M er lever 0.1A Pin plunger D2SW-P01H D2SW-P01D D2SW-P01T D2SW-P01M Hinge lever D2SW-P01L1H D2SW-P01L1D D2SW-P01L1T D2SW-P01L1M Hinge roller le- D2SW-P01L2H D2SW-P01L2D D2SW-P01L2T D2SW-P01L2M ver Simulated roll- D2SW-P01L3H D2SW-P01L3D D2SW-P01L3T D2SW-P01L3M er lever Note Consult your OMRON sales representative for details on SPST-NO and SPST-NC models. Specifications Ratings Model Rated voltage Resistive load D2SW-P2 30 VDC 2 A 250 VAC D2SW-P01 30 VDC 0.1 A 125 VAC Note The ratings values apply under the following test conditions. Ambient temperature: 20 2 C Ambient humidity: 65 5% Operating frequency: 20 operations/min Characteristics Item Model D2SW-P2 D2SW-P01 Operating speed 0.1 mm to 500 mm/s (pin plunger models) Operating frequency Machanical : 120 operations/min max. Electrical : 20 operations/min max. Insulation resistance 100 M min. (at 500 VDC) Contact resistance (initial value) Terminal models : 50 m max. Terminal models : 100 m max. Molded lead wire models : 100 m max. Molded lead wire models : 150 m max. Dielectric strength (see note 2) 1,000 VAC, 50/60 Hz for 1 min between terminals 600 VAC, 50/60 Hz for 1 min between terminals of the same polarities of the same polarities 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each terminal and non-current-carrying metal parts Vibration resistance (see note 3) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance (see note 3) Destruction: 1,000 m/s approx. 100G max. 2 Malfunction: 300 m/s approx.30G max. Durability (see note 4) Mechanical: 1,000,000 operations min. Mechanical: 1,000,000 operations min. (60 operations/min.) (60 operations/min.) Electrical: 50,000 operations min. Electrical: 200,000 operations min. (20 operations/min.) (20 operations/min) Degree of protection IEC IP67 (see note 5) (excluding the terminals on terminal models) Degree of protection against electric shock Class 1 Proof tracking index (PTI) 175 Ambient operating temperature 20 Cto 70 C (at ambient humidity of 60% max.) (with no icing or condensation) Ambient operating humidity 85% max. (for 5C to 35C) Weight Approx. 2 g (pin plunger models with terminals) Note: 1. The data given above are initial values. 2. The dielectric strength shown in the table indicates a value for models with a Separator. 3. For the pin plunger models, the above values apply for both the free position and total travel position. For the lever models, the values apply at the total travel position. Contact opening or closing time is within 1ms. 4. Consult your OMRON sales representative for testing conditions. 5. The test to meet standards checks for water intrusion after immersion for 30 minutes. The test does not check for switching op- eration underwater. Refer toDegree of Protectio ofInstructions for Correct Us. 2