D2SW TERMINAL COVER Omron

Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures high sealing capability and is ideal for dusty places or where water is sprayed Wide operating temperature range of -40C to 85C Perfect for the automobile, agriculture machinery, automatic vending machine, refrigerator, ice-manufacturing, hot-water supply, air conditioner, and industrial equipment, which require highly environment-resistive capabilities RoHS Compliant Ordering Information Actuator Terminal Model Model 3 A Model 0.1 A Pin plunger Solder terminals D2SW-3HS D2SW-01HS Quick-connect terminals ( 110) D2SW-3TS D2SW-01TS PCB terminals D2SW-3DS D2SW-01DS With lead wires D2SW-3MS D2SW-01MS Hinge lever Solder terminals D2SW-3L1HS D2SW-01L1HS Quick-connect terminals ( 110) D2SW-3L1TS D2SW-01L1TS PCB terminals D2SW-3L1DS D2SW-01L1DS With lead wires D2SW-3L1MS D2SW-01L1MS Simulated roller lever Solder terminals D2SW-3L3HS D2SW-01L3HS Quick-connect terminals ( 110) D2SW-3L3TS D2SW-01L3TS PCB terminals D2SW-3L3DS D2SW-01L3DS With lead wires D2SW-3L3MS D2SW-01L3MS Hinge roller lever Solder terminals D2SW-3L2HS D2SW-01L2HS Quick-connect terminals ( 110) D2SW-3L2TS D2SW-01L2TS PCB terminals D2SW-3L2DS D2SW-01L2DS With lead wires D2SW-3L2MS D2SW-01L2MS Note: 1. S at the end of the part number signifies UL/CSA approved models. 2. The standard lengths of the lead wires (UL1015 AWG22 for UL/CSA models, AV0.5f otherwise.) of models incorporating them are 30 cm. Model Number Legend D2SW- 1 2 3 4 4. Terminals 1. Ratings 3. Contact Form 3: 3 A at 125 VAC None: SPDT H, HS: Solder terminals (HS for UL and CSA approval) 01: 0.1 A at 30 VDC -2: SPST-NC* D, DS: PCB terminals (DS for UL and CSA approval) -3: SPST-NO* T, TS: Quick-connect terminals ( 110) 2. Actuator (TS for UL and CSA approval) None: Pin plunger *Lead wire versions only M, MS: Molded lead wires (MS for UL and CSA approval) L1: Hinge lever L2: Hinge roller lever L3: Simulated roller lever Sealed Snap Action Switch D2SW 195Specifications Characteristics Item D2SW-3 D2SW-01 Operating speed 0.1 mm to 1 m/second (at pin plunger) Operating frequency Mechanical: 300 operations/minute max. Electrical: 30 operations/minute max. Insulation resistance 100 M min. (at 500 VDC) Contact resistance 30 m max. for terminal models 50 m max. for terminal models 50 m max. for lead wire models 70 m max. for lead wire models Dielectric strength (See note 2) 1,000 VAC, 50/60 Hz for 1 min. between 600 VAC, 50/60 Hz for 1 min. between ter- terminals of the same polarity minals of the same polarity 1,500 VAC, 50/60 Hz for 1 min. between current-carrying metal parts and ground, and between each terminal and noncurrent-carrying metal parts Vibration resistance (See note 3) Malfunction: 10 to 55 Hz, 1.5 mm double amplitude 2 Shock resistance (See note 3) Destruction: 1,000 m/s (approx. 100G) max. 2 Malfunction: 300 m/s (approx. 30G) max. Ambient operating temperature -40 to 85C (at 60% RH) with no icing Ambient operating humidity 95% max. (for 5C to 35C) Degree of protection IEC IP67 (excluding the terminals on terminal models) Degree of protection against electric shock Class I Proof tracking index (PTI) 175 Life expectancy Mechanical 5,000,000 operations min. at 60 operations per minute Electrical 200,000 operations min. (3 A at 125 VAC) 200,000 operations min. (30 operations per minute) 100,000 operations min. (2 A at 250 VAC) (at rated resistive load) Weight Terminal model Approx. 2 g Lead wire model Approx. 10 g Note: 1. Data shown are of initial value. 2. The dielectric strength shown is measured using a separator between the switch and metal mounting plate 3. For pin plunger models, the above values apply for use at the free position, operating position, and total travel position. For models with levers, the values apply at the total travel position. Ratings (reference values) D2SW-3 Rated Voltage Non-inductive load (A) Inductive load Resistive load Lamp load Inductive load Motor load NC NO NC NO NC NO NC NO 125 VAC 3 A 1 A 0.5 A 1 A 0.5 A 1 A 0.5 A 250 VAC 2 A 0.5 A 0.3 A 0.5 A 0.3 A 0.5 A 0.3 A 30 VDC 3 A1 A1 A1 A D2SW-01 Rated Voltage Non-inductive load Inductive load Resistive load Lamp load Inductive load Motor load NC NO NC NO NC NO NC NO 125 VAC 0.1 A 30 VDC 0.1 A Note: 1. The resistive load ratings apply under the following test conditions: Ambient Temperature = 202C, Ambient Humidity = 655%, Operating frequency = 30 operations/min. 2. The above current ratings are the values of the steady-state current. 3. Inductive load has a power factor of 0.7 min. (AC) and a time constant of 7 ms max. (DC). 4. Lamp load has an inrush current of 10 times the steady-state current. 5. Motor load has an inrush current of 6 times the steady-state current. 196 Sealed Snap Action Switch D2SW