Miniature Door Switch D3DC Long Stroke Actuator with Operating Position Marks Long stroke (7 mm) in a small package. Easy assembly with panel mount design. Quick-connection terminals facilitate wiring. Simple leaf switch structure. RoHS Compliant Ordering Information Model Number Legend List of Models 1. Contact Form Contact form Model D3DC- 1: SPST-NC SPST-NC D3DC-2 1 2: SPST-NO SPST-NO D3DC-3 Specifications Ratings Note: The electrical rating applies under the following test con- Rated voltage Resistive load ditions: 30 VDC 0.1 A Ambient Temperature = 202C Ambient Humidity = 655%, Operating frequency = 20 operations/min. Characteristics Operating speed 0.5 mm to 1 mm/s Operating frequency Mechanical:30 operations/min max. Electrical: 20 operations/min max. Insulation resistance 100 M min. (at 500 VDC) Contact resistance 300 m max. Dielectric strength 600 VAC, 50/60 Hz for 1 min between terminals of the same polarity 1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground Vibration resistance (see note 2) Malfunction: 10 to 55 Hz, 1.5-mm double amplitude 2 Shock resistance Destruction:500 m/s max. (see note 2) 2 Malfunction:100 m/s max. Degree of protection IEC IP00 Proof tracking index (PTI) 600 Ambient operating temperature 25 C to 85 C (at 60% RH max.) (with no icing or condensation) Ambient operating humidity 85% max. (for 5C to 35C) Life expectancy Mechanical : 100,000 operations min. (30 operations/min) Electrical : 100,000 operations min. (20 operations/min) Weight Approx. 2 g Note: 1. The data given above are initial values. 2. The contacts do not open or close for more than 1 ms. 1D3DC D3DC Approved Standards Contact Form UL Recognlzed SPST-NC SPST-NO CSA Certified (UL approval) Rerated voltage Rated Load 30 VDC 0.1 A NC NO Contact Specifications COM COM Item Specification Specification Rivet Material Silver Gap (standard value) 0.3 mm Minimum applicable load (see note) 1 mA at 5 VDC Note: Minimum applicable loads are indicated by N standard ref- erence values. This value represents the failure rate at a 60%( ) reliability level (JIS C5003). 60 -6/ The equation =0.510 operations indicates that a fail- 60 ure rate of 1/2,000,000 operations can be expected at a reliability level of 60%. Dimensions Dimensions and Operating Characteristics Note: 1. Unless otherwise specified, all units are in millimeters and a tolerance of 0.4 mm applies to all dimensions. 2. The operating characteristics are for operation in direction A (indicated by the arrow). D3DC-2 19 7.3 D3DC-3 Model D3DC-2 D3DC-3 11 OF max. 1.0 N 102 gf TT 7.0 mm (reference value) A 4.9 dia. FP 9.5 mm (reference value) OP min. 6.7 mm 10 TT P TTP 2.0 mm (reference value) (TT) (F P) (OP) 2 2 12.1 8 8.5 Mounting Panel Cutout Dimensions Connectors The terminals connect to JSTs XA Connector. +0.1 16.9 The XA Connector consists of the following components. Contact: SXA-001T-P0.6 +0.1 Housing: XAP-02V-1 8.7 0 OMRON does not sell the HL Connector. Contact the following. J.S.T. Manufacturing Co., Ltd. (Japan) Note: Mounting plate thickness: 0.75 mm to 1.50 mm. Phone: +81-6-6968-1121 All units are in millimeters unless otherwise indicated. Fax: +81-6-6964-2666 J.S.T. (U.K.) Ltd. (United Kingdom) Phone: +44-1986-874131 Fax: +44-1986-874276 J.S.T. Corporation (U.S.A.) Phone: +1-847-473-1957 Fax: +1-847-473-0144 J.S.T. (H.K.) Co. Ltd. (Hong Kong) Phone: +852-24137979 Fax: +852-24111193 2