RFID Non-contact Safety Switches D40R RFID Non-contact switches are designed to monitor hinged, sliding or removable guard doors. RFID technology provides increased tamper resistance. Based on RFID technology, providing high anti-tamper resistance The RFID-design covers two models with anti-tamper coding: - B-types (Basic coded): Any sensor works with any actuator - U-types (Unique coded): Each sensor and actuator use a unique code. This is a solution for applications that require an even higher level of anti-tamper coding Conforms to safety categories up to PLe acc. EN ISO 13849-1 Connect up to 20 switches in series, up to PLd acc. EN ISO 13849-1 LED indicates operation state Operates with all two-channel NC Omron safety controllers IP69K versions suitable for high pressure cleaning, Clean In Place (CIP) and Sanitize In Place (SIP) processes. LISTED Model Number Structure D40R- *P*-21- * 1 2 3 3. Cable Length/Connection 1. Type 2. Code 05: 5 m Cable L: Elongated Sensor B: Basic Code 10: 10 m Cable S: Small Sensor U: Unique Codes M12: M12 male connector, 8 pin, fitted with 250 mm cable Ordering Information Basic coded: Any actuator will operate with any sensor (Teach process needed, if actuator will be changed: Power down - place actuator to sensor - power up). Unique coded: Only one actuator fits to the code of the sensor (Replacement of only sensor OR actuator is not possible) Type Cable Connection Contact Model Configuration Basic Coded Unique Coded Elongated Sensors 5 m pre-wired 2NC/1NO D40R-LPB-21-05 D40R-LPU-21-05 10 m pre-wired D40R-LPB-21-10 D40R-LPU-21-10 M12, 8 pin, fitted with 250 mm cable D40R-LPB-21-M12 D40R-LPU-21-M12 Small Sensors 5 m pre-wired 2NC/1NO D40R-SPB-21-05 D40R-SPU-21-05 10 m pre-wired D40R-SPB-21-10 D40R-SPU-21-10 M12, 8 pin, fitted with 250 mm cable D40R-SPB-21-M12 D40R-SPU-21-M12 1D40R Accessories Cables Type Cable Connection Model Cables (M12 Female - 8-pin to flying 5 m D40ML-CBL-M12-05M leads) 10 m D40ML-CBL-M12-10M Cables (M12 Male to M12 Female 2 m D40P-8PMF-M12-02M - 8-pin) 5 m D40P-8PMF-M12-05M 10 m D40P-8PMF-M12-10M T-Connector Connection Cable T-Connector for M12 cable D40P-8PTC-M12 Shorting Plug M12 Shorting Plug D40P-8PSP-M12 Replacement Actuators Type Compatible Basic Coded Switch Model Model Replacement Actuators for D40R-LPB D40R-LPB-A (only for basic coded types) for D40R-SPB D40R-SPB-A 2