D4CC-4032 Omron

Enclosed Switch D4C Compact Limit Switch That s Also Thin and Highly Sealed Approved by EN, UL, CSA, and CCC (Chinese standard). (Ask your OMRON representative for information on approved models.) Sealing characteristics that meet IEC IP67 degree of protection. Triple-sealed construction: Plunger section sealed via nitrile rubber packing seal and diaphragm switch section sealed via nitrile rubber cap cable entrance sealed via encapsulating material. Cable lengths of 3 and 5 m available on standard models. Models also available with UL and CSA-certified cables. Multiple mounting possible with Switches with Plungers. Models with red LED indicators added to series for easy confirmation of operation. (Set by default to light for non-operation.) VCTF cables with CE marking. Be sure to read Safety Precautions on page 13 to 14 and Safety Precautions for All Limit Switches. (Applicable only to standard models.) Model Number Structure Model Number Legend Standard Models Pre-wired Models Weather-resistant Models D4C- D4C- 0 - D4C- -P (1)(2)(3) (1) (2) (3) (4) (1)(2)(3) (4) (1) Rated Current (1) Rated Current (1) Rated Current 1: 5 A at 250 VAC, 4 A at 30 VDC 1: 1 A at 125 VAC, 1 A at 30 VDC 1: 5 A at 250 VAC, 4 A at 30 VDC 2: 5 A at 125 VAC (with LED indicator) (Without operation indicator) 2: 5 A at 125 VAC (with LED indicator) 3: 4 A 30 VDC (with LED indicator) 2: 1 A at 125 VAC (with operation indicator) 3: 4 A at 30 VDC (with LED indicator) 4: 0.1 A at 125 VAC, 0.1 A at 30 VDC 3: 1 A at 30 VDC (with operation indicator) 4: 0.1 A at 125 VAC, 0.1 A at 30 VDC 5: 0.1 A at 125 VAC (with LED indicator) (2) Actuator (2) Cable Specifications 6: 0.1 A at 30 VDC (with LED indicator) 01: Pin plunger 2: VCTF oil-resistant cable (3 m) (2) Cable Specifications 02: Roller plunger 3: VCTF oil-resistant cable (5 m) 2: VCTF oil-resistant cable (3 m) 31: Sealed plunger (3) Actuator 3: VCTF oil-resistant cable (5 m) 32: Sealed roller plunger 20: Roller lever 4: VCTF (3 m) 24: Roller lever (high-sensitivity model) 24: Roller lever (high-sensitivity model) 5: VCTF (5 m) (3) Wiring Specifications 27: Adjustable roller lever 6: SJT(O) (3 m) DK1EJ: Pre-wired models 29: Adjustable rod lever 7: SJT(O) (5 m) (3 conductors: DC specification) (4) Structure (3) Actuator AK1EJ: Pre-wired models P: Weather-resistant 01: Pin plunger (3 conductors: AC specification) 02: Roller plunger M1J: Connector models for ASI devices 03: Crossroller plunger (2 conductors: NO wiring) 20: Roller lever (4) Cable length 24: Roller lever (high-sensitivity model) 03: 0.3 m 31: Sealed pin plunger Wiring Specifications 32: Sealed roller plunger 33: Sealed crossroller Internal switch Connector 50: Plastic rod COM 3 60: Center roller lever NC 2 NO 4 D4C Ordering Information Switches Switches with No Operation Indicator Standard Microload Ratings 5 A at 250 VAC, 4 A at 30 VDC 0.1 A at 125 VAC, 0.1 A at 30 VDC Cable VCTF oil-resistant VCTF oil-resistant Cable VCTF cable *2 SJT(O) cable *3 VCTF cable *2 cable *1 cable *1 length Actuator (m) Model 3 D4C-1201 D4C-1401 D4C-1601 D4C-4201 D4C-4401 Pin plunger 5 D4C-1301 D4C-1501 D4C-1701 D4C-4301 D4C-4501 3 D4C-1202 D4C-1402 D4C-1602 D4C-4202 D4C-4402 Roller plunger 5 D4C-1302 D4C-1502 D4C-1702 D4C-4302 D4C-4502 3 D4C-1203 D4C-1403 D4C-1603 D4C-4203 D4C-4403 Crossroller plunger 5 D4C-1303 D4C-1503 D4C-1703 D4C-4303 D4C-4503 3 D4C-1220 D4C-1420 D4C-1620 D4C-4220 D4C-4420 Roller lever 5 D4C-1320 D4C-1520 D4C-1720 D4C-4320 D4C-4520 Roller lever, 3 D4C-1224 D4C-1424 D4C-1624 D4C-4224 D4C-4424 high -sensitivity 5 D4C-1324 D4C-1524 D4C-1724 D4C-4324 D4C-4524 3 D4C-1231 D4C-1431 D4C-1631 D4C-4231 D4C-4431 Sealed pin plunger 5 D4C-1331 D4C-1531 D4C-1731 D4C-4331 D4C-4531 3 D4C-1232 D4C-1432 D4C-1632 D4C-4232 D4C-4432 Sealed roller plunger 5 D4C-1332 D4C-1532 D4C-1732 D4C-4332 D4C-4532 Sealed 3 D4C-1233 D4C-1433 D4C-1633 D4C-4233 D4C-4433 crossroller plunger 5 D4C-1333 D4C-1533 D4C-1733 D4C-4333 D4C-4533 3 D4C-1250 D4C-1450 D4C-1650 D4C-4250 D4C-4450 Plastic rod 5 D4C-1350 D4C-1550 D4C-1750 D4C-4350 D4C-4550 3 D4C-1260 D4C-1460 D4C-1660 D4C-4260 D4C-4460 Center roller lever 5 D4C-1360 D4C-1560 D4C-1760 D4C-4360 D4C-4560 Note: 1. Models are available separately with resistance to viscous oils (oil drain holes are also available), but only with Plunger Models. Add -M to the model number (example: D4C-1202 would be D4C-1202-M). 2. Switches with variable roller levers are also available. Ask your nearest OMRON representative for details. *1. Oil-resistant vinyl cabtire cables approved by EN and IEC. *2. Ordinary vinyl cabtire cables approved by EN and IEC. *3. Switches with SJT(O) Cables (cables approved by UL and CSA) are approved by UL and CSA.