D4ER1A22N Omron

Oil-Resistant Limit Switches D4ER- N Even Better Oil Resistance Than D4E-N Switches Material combining HNBR and fluororubber used for superior resistance to oil. Prevents ingress of cutting oil from moving sections. Fluororesin cable that withstands cutting oils is provided as standard. Pre-wired and connector cable models available. Smartclick connectors for easy connection. Minute load model with gold cladding is optimal for electronic control. Approved by EN (TV). For the most recent information on models that have been certified for Same mounting pitch as D4E-N Switches. safety standards, refer to your OMRON website. IP67G degree of protection (JIS C 0920 Annex 1). * * The IP67G is the degree of protection which is defined according to Be sure to read Safety Precautions on pages 37 to 38 and the JIS (Japanese Industrial Standards). Safety Precautions for All Limit Switches. The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil. Features Material Combining HNBR and Fluororubber Fluororesin Cable Provided as Fluororesin Sheath for Superior Resistance to Oil Standard to Withstand Cutting Oils New Moving sections are protected from ingress of cutting oil. Rubber In addition to prewired models, models are also Material available with prewired Smartclick connectors for easy connection. Important Sealing Sections for Moving Parts Cable type CCuutting oiltting oil Blocked.Blocked.Blocked. Blocked.Blocked.Blocked. CCuutting oiltting oil Pre-wired Connector type Rubber seals Rubber seals (Material combining (Material combining HNBR and fluororubber) HNBR and fluororubber) Blocked.Blocked.Blocked. Blocked.Blocked.Blocked. Cutting oil CCuutting oiltting oil Applications Table Overrun Detection Table Position Detection 1D4ER- N Model Number Structure Model Number Legend (Not all combinations are possible. Ask your OMRON representative for details.) D4ER- N (1)(2) (3) (4) (1) Rated Current (2) Actuator (3) Terminals 1: 1 A at 30 VDC (Standard load) A: Roller plunger 21: Cable (right-hand) 2: 0.1 A at 30 VDC (Micro load) B: Crossroller plunger 22: Cable (left-hand) C: Plunger Note: The terminal specifications in model numbers are not D: Sealed roller plunger the same for D4ER- N and D4E Switches. E: Sealed crossroller plunger Comparison of New and Old Terminal Models G: Roller lever Model L : Long roller plunger Location of D4ER- N D4E lead outlet (4) Pre-wired Connector Right-hand D4ER- 21N D4E- 21 -DTK1EJ: Pre-wired connector Left-hand D4ER- 22N D4E- 23 (30-cm oil-resistant cable, M12 Smartclick connector) Bottom D4E- 22 Blank : No connector (oil-resistant cable: 2 m) Note: D4ER- N Switches are not available with operation indicators. Ordering Information Type Cable type Standard load Right-hand Left-hand Actuator Model Model Roller plunger D4ER-1A21N D4ER-1A22N Crossroller D4ER-1B21N D4ER-1B22N plunger Plunger D4ER-1C21N D4ER-1C22N Sealed roller D4ER-1D21N D4ER-1D22N plunger Sealed crossroller D4ER-1E21N D4ER-1E22N plunger Roller lever D4ER-1G21N D4ER-1G22N Long roller D4ER-1L21N D4ER-1L22N plunger Type Cable type Micro load Right-hand Left-hand Actuator Model Model Roller plunger D4ER-2A21N D4ER-2A22N Crossroller D4ER-2B21N D4ER-2B22N plunger Plunger D4ER-2C21N D4ER-2C22N Sealed roller D4ER-2D21N D4ER-2D22N plunger Sealed crossroller D4ER-2E21N D4ER-2E22N plunger Roller lever D4ER-2G21N D4ER-2G22N Long roller D4ER-2L21N D4ER-2L22N plunger 2