Small Safety Limit Switch D4F CSM D4F DS E 5 3 Note: Contact your sales representative for details on Ultra-Small Safety Limit Switch models with safety standard certification. An incredibly small limit switch with a direct opening mechanism (four-contact construction model). High-sensitivity safety limit switch. Built-in switches with two- or four-contact construction are available. Degree of protection: IP67 Conforms to EN115-1, EN81-1 and EN81-2. (slow-action models only) Certified standards: UL, EN (TV), and CCC Be sure to read the Safety Precautions on page 6 and the Precautions for All Safety Limit Switches . For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Model Number Structure Model Number Legend D4F- - 12 3 4 1. Built-in Switch 3. Cable Length 1: 1NC/1NO (slow-action) 1: 1 m 2: 2NC (slow-action) 3: 3 m 3: 2NC/2NO (slow-action) 5: 5 m 4: 4NC (slow-action) 4. Pull-outing direction of cable R: Horizontal 2. Actuator 02: Roller plunger D: Vertical (Metal roller) 20: Roller lever (Metal lever, resin roller) Ordering Information List of Models Safety Limit Switches (with Direct Opening Mechanism) Consult with your OMRON representative when ordering any models that are not listed in this table. Built-in switch 1NC/1NO 2NC 2NC/2NO 4NC Cable Pull-outing Actuator (slow-action) (slow-action) (slow-action) (slow-action) length direction of cable Direct Direct Direct Direct Model Model Model Model opening opening opening opening Horizontal D4F-120-1R D4F-220-1R D4F-320-1R D4F-420-1R 1 m Roller lever Vertical D4F-120-1D D4F-220-1D D4F-320-1D D4F-420-1D (Metal lever, Horizontal D4F-120-3R D4F-220-3R D4F-320-3R D4F-420-3R resin roller) 3 m Vertical D4F-120-3D D4F-220-3D D4F-320-3D D4F-420-3D Horizontal D4F-120-5R D4F-220-5R D4F-320-5R D4F-420-5R 5 m Vertical D4F-120-5D D4F-220-5D D4F-320-5D D4F-420-5D Horizontal D4F-102-1R D4F-202-1R D4F-302-1R D4F-402-1R Roller 1 m plunger Vertical D4F-102-1D D4F-202-1D D4F-302-1D D4F-402-1D (Metal roller) Horizontal D4F-102-3R D4F-202-3R D4F-302-3R D4F-402-3R 3 m Vertical D4F-102-3D D4F-202-3D D4F-302-3D D4F-402-3D Horizontal D4F-102-5R D4F-202-5R D4F-302-5R D4F-402-5R 5 m Vertical D4F-102-5D D4F-202-5D D4F-302-5D D4F-402-5D 1D4F Specifications Standards and EC Directives Certified Standard Ratings Conforms to the following EC Directives: TV (EN60947-5-1), CCC (GB14048.5) Machinery Directive Item Utilization category AC-15 DC-13 Low Voltage Directive Rated operating current (Ie) 0.75 A 0.27 A EN50047 Rated operating voltage (Ue) 240 V 250 V EN60204-1 EN ISO 14119 Note: Use a 10 A fuse type gI or gG that conforms to IEC60269 as a GS-ET-15 short-circuit protection device. Certified Standards UL/CSA (UL508, CSA C22.2 No. 14) C300 Certification body Standards File No. EN60947-5-1 Current (A) Volt-amperes (VA) Rated TV SD *1 Carry current (certified direct opening) voltage Make Break Make Break UL508 120 VAC 15 1.5 UL *2 E76675 CSA C22.2 No.14 2.5 A 1,800 180 240 VAC 7.5 0.75 20030103050 CQC (CCC) *3 GB14048.5 64266 Q300 *1. Contact your OMRON sales representative. Current (A) Volt-amperes (VA) Rated *2. Certification has been obtained for CSA C22.2 No. 14 under UL. Carry current voltage Make Break Make Break *3. Ask your OMRON representative for information on certified models. 125 VDC 0.55 0.55 2.5 A 69 69 250 VDC 0.27 0.27 2