D5V Contact Displacement Sensor Built-in Amplifier Ensures Ease of Use and Saves Wiring Effort. Sensor Operates with a Low Force in a Wide Range of Applications. Works with a low operating force (30 gf) to detect a wide variety of objects including glass, plastic, and rubber Models with digital output for the B7A or 4- to 20-mA linear output corresponding to the 0- to 5-mm travel distances of the actuator are available Models with ball-, flat-, or pin-type actuators are available for a wide variety of objects Approved Standards ASTA, BSEN61010-1, EN50081-1, prEN50082-2, ASTA Licence No. 332 Refer to the Precautions Section. Ordering Information MODEL NUMBER LEGEND D5V - -3 1 12 1. Output 2. Actuator A: 4- to 40-mA linear output B: Ball type M: B7A serial communications output P: Pin type F: Flat type Travel Distance Output Appearance Actuator Resolution Part Number 5mm 4to20mA Ball type 10 m D5VA-3B1 Pin type D5VA-3P1 Flat type D5VA-3F1D5V D5V Travel Distance Output Appearance Actuator Resolution Part Number 5mm B7A serial Ball type 1 m D5VM-3B1 communications output (see note) Pin type D5VM-3P1 Flat type D5VM-3F1 Note: Use the D5VM-3 1 in combination with the 16-point B7A Output Link Terminals with a standard transmission delay (i.e., a transmission delay of 19.2 ms). No high-speed B7A Output Link Terminals can be used with the D5VM-3 1. Specifications Part number D5VA-3 1 D5VM-3 1 Supply voltage 12 to 24 VDC10% (see note 1) Current consumption 100 mA max. Measurement range 5mm Max. actuator travel distance Approx. 5.7 mm (0.22 in) Offset adjustment range 0.25 mm Resolution 10 m 1 m Linearity 0.5% FS max. Repeat accuracy 5 mmax. Response speed 6ms max. 37 ms max. including transmission delay Operating force 0.3 N (30 gf) max. Output 4- to 20-mA linear current output B7A serial communications output (see note 2) (BCD and multipoint output modes (see note 3) Mounting method M4 x 2 Indicator Power and overtravel indicators Power, overtravel, setting, and output indicators Life expectancy Mechanical: 10,000,000 times min. Temperature influence 0.04% FS/Cmax. Ambient Operating --10Cto55C(14F to 131F) with no icing temperature Storage --25Cto65C(--13F to 149F) with no icing Ambient Operating 35% to 85% humidity Insulation resistance 100 M min. at 100 VDC Dielectric strength 1,000 VAC, 50/60 Hz for 1 min. Noise resistance 1.5 kV with a pulse width of 100 ns to 1 s Vibration resistance 10 to 55 Hz, 0.75-mm double amplitude Shock resistance 196 m/s 20 G Cable 2m Weight Approx. 80 g without cord Material ABS and PC polymer alloy Enclosure Rating IP40 Note: 1. If power is supplied to both the D5VM-3 1 and B7A Output Link Terminals from a single power supply, the supply voltage must be 24 VDC10%. 2. Use the D5VM-3 1 in combination with the 16-point B7A Output Link Terminals with a standard transmission delay (i.e., a trans- mission delay of 19.2 ms). No high-speed B7A Output Link Terminals model can be used with the D5VM-3 1. 3. The BCD or multipoint output mode can be selected with the mode selector.