Special-purpose Basic Switch DZ CSM DZ DS E 4 2 DPDT Basic Switch for Two Independent Circuit Control Ideal for switching the circuits operating on two different voltages, and for controlling two independent circuits. Interchangeable with OMRON Z Basic Switches, as both switches are identical in mounting hole dimensions, mounting pitch and pin plunger position. Be sure to read Safety Precautions on page 7 and Safety Precautions for All Basic Switches. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Model Number Structure Model Number Legend (1) Ratings (3) Actuator (4) Contact Form DZ-10G -1 10 : 10 A (250 VAC) None : Pin plunger 1 : DPDT (1) (2)(3) (4)(5) V : Hinge lever (2) Contact Gap (5) Terminals V22 : Short hinge roller lever G : 0.5 mm V2 : Hinge roller lever A : Solder terminal W : Hinge lever B : Screw terminal W22 : Short hinge roller lever W2 : Hinge roller lever Ordering Information Terminal Solder terminal (-1A) Screw terminal (-B) Actuator Model Model Pin plunger DZ-10G-1A DZ-10G-1B High OT DZ-10GW-1A DZ-10GW-1B Hinge lever Low OT DZ-10GV-1A DZ-10GV-1B High OT DZ-10GW22-1A DZ-10GW22-1B Short hinge roller lever Low OT DZ-10GV22-1A DZ-10GV22-1B High OT DZ-10GW2-1A DZ-10GW2-1B Hinge roller lever Low OT DZ-10GV2-1A DZ-10GV2-1B Specifications Ratings Certified Standard Ratings Ask your OMRON representative for Non-inductive load (A) Inductive load (A) information on certified models. Rated voltage Resistive load Lamp load Inductive load Motor load UL/CSA NC NO NC NO NC NO NC NO 125 VAC 10 2 1 6 3 1.5 Rated voltage DZ-10G 250 VAC 10 1.5 0.7 4 2 1 125 VAC 10 A 1/8 HP 8 VDC 10 3 1.5 6 5 2.5 250 VAC 10 A 1/4 HP 14 VDC 10 3 1.5 6 5 2.5 480 VAC 2 A 30 VDC 10 3 1.5 4 3 1.5 125 VAC 0.5 0.5 0.05 0.05 125 VDC 0.5 A 250 VDC 0.25 0.25 0.03 0.03 250 VDC 0.25 A Note: 1. The above values are for steady-state current. 2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC). 3. Lamp load has an inrush current of 10 times the steady-state current. 4. Motor load has an inrush current of 6 times the steady-state current. 5. The ratings values apply under the following test conditions: (1) Ambient temperature: 202C (2) Ambient humidity: 655%RH (3) Operating frequency: 20 operations/min 1DZ Characteristics Engineering Data Mechanical Durability (DZ-10G-1B) Operating speed 0.1 mm to 1 m/s *1 10,000 Mechanical 240 operations/min Operating 7,000 Ambient temperature: 202C frequency Electrical 20 operations/min Ambient humidity: 655%RH 5,000 Without load Insulation resistance 100 M min. (at 500 VDC) Operating frequency: 240 operations/min 3,000 Contact resistance 15 m max. (initial value) 1,000 VAC, 50/60 Hz for 1 min between non-continuous terminals 1,500 VAC, 50/60 Hz for 1 min between current-carrying Dielectric strength 1,000 metal parts and non-current-carrying metal part, and between 700 current-carrying metal part and ground and between switches 500 Vibration Malfunction 10 to 55 Hz, 1.5-mm double amplitude *2 resistance 300 2 Destruction 1,000 m/s max. Shock 2 resistance Malfunction 300 m/s max. *1 *2 100 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Mechanical 1,000,000 operations min. Durability Overtravel (mm) Electrical 500,000 operations min. Electrical Durability (DZ-10G-1B) Degree of protection IP00 1,000 Degree of protection Ambient temperature: 202C Class I 700 against electric shock Ambient humidity: 655%RH 500 Operating frequency: 20 operations/min Proof tracking index (PTI) 175 cos 1 300 Ambient operating temperature 25C to 80C (with no icing) Ambient operating humidity 35% to 85%RH 125 VAC Weight Approx. 30 to 50 g 100 *1. The values are for pin plunger models. (Contact your OMRON representative for other models.) 70 *2. Malfunction: 1 ms max. 50 250 VAC Contact Specifications 30 Material Silver alloy Contacts Gap (standard value) 0.5 mm 10 NC 30 A max. Inrush current 0 5 10 15 NO 15 A max. Switching current (A) Structure Contact Form (DPDT) COM2 NC2 NO2 COM1 NC1 NO1 Dimensions (Unit: mm) Terminals Solder Terminals (-1A) Screw Terminals (-1B) 14.5 14.5 8.2 8.2 0.1 0.1 25.4 25.4 11.9 0.2 11.9 17.450.2 17.45 49.2 49.2 23.5 16.8 23.5 16.8 COM NC NO COM NC NO COM NC NO COM NC NO Six M3 pan head screws (with toothed washer) Dimensions and Operating Characteristics The solder terminal model has a suffix-1 in its model number and its omitted dimensions are the same as the corresponding dimensions of the pin plunger model. Pin Plunger 3 dia. 2.5SR * PT 0.25 23.3 0.4 DZ-10G-1B OP 14.5 Operating force OF max. 5.59 N Release force RF min. 0.56 N 8.2 Pretravel PT max. 1.7 mm +0.075 4.2 -0.025 +0.1 4.36 dia. Overtravel OT min. 0.13 mm -0.05 +0.075 0.2 17.45 Movement Differential MD max. 0.4 mm 11.9 4.2 dia. hole -0.025 25.40.1 Operating Position OP 15.60.4 mm 49.2 * Stainless-steel pin plunger 2 4 4 Durability (x10 operations) Durability (x10 operations)