Special-purpose Basic Switch
DZ
CSM_DZ_DS_E_2_1
DPDT Basic Switch for Two
Independent Circuit Control
Ideal for switching the circuits operating on two
different voltages, and for controlling two independent
circuits.
Interchangeable with OMRON Z Basic Switches, as
both switches are identical in mounting hole
dimensions, mounting pitch and pin plunger position.
Be sure to read Safety Precautions on page 4 and Safety
Precautions for All Basic Switches.
Model Number Structure
Model Number Legend
(1) Ratings (3) Actuator (4) Contact Form
DZ-10G@-1@
10 : 10 A (250 VAC) None : Pin plunger 1 : DPDT
(1) (2)(3) (4)(5)
V : Hinge lever
(2) Contact Gap (5) Terminals
V22 : Short hinge roller lever
G : 0.5 mm V2 : Hinge roller lever A : Solder terminal
W : Hinge lever B : Screw terminal
W22 : Short hinge roller lever
W2 : Hinge roller lever
Ordering Information
Terminal Solder terminal (-1A) Screw terminal (-B)
Actuator Model Model
Pin plunger DZ-10G-1A DZ-10G-1B
High OT DZ-10GW-1A DZ-10GW-1B
Hinge lever
Low OT DZ-10GV-1A DZ-10GV-1B
High OT DZ-10GW22-1A DZ-10GW22-1B
Short hinge roller lever
Low OT DZ-10GV22-1A DZ-10GV22-1B
High OT DZ-10GW2-1A DZ-10GW2-1B
Hinge roller lever
Low OT DZ-10GV2-1A DZ-10GV2-1B
Specifications
Ratings Certified Standard Ratings
Ask your OMRON representative for
Non-inductive load (A) Inductive load (A)
information on certified models.
Rated voltage Resistive load Lamp load Inductive load Motor load
UL/CSA
NC NO NC NO NC NO NC NO
Rated voltage DZ-10G
125 VAC 10 2 1 6 3 1.5
250 VAC 10 1.5 0.7 4 2 1
125 VAC 10 A 1/8 HP
8 VDC 10 3 1.5 6 5 2.5 250 VAC 10 A 1/4 HP
14 VDC 10 3 1.5 6 5 2.5
480 VAC 2 A
30 VDC 10 3 1.5 4 3 1.5
125 VDC 0.5 A
125 VAC 0.5 0.5 0.05 0.05
250 VDC 0.25 A
250 VDC 0.25 0.25 0.03 0.03
Note: 1. The above values are for steady-state current.
2. Inductive load has a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
3. Lamp load has an inrush current of 10 times the steady-state current.
4. Motor load has an inrush current of 6 times the steady-state current.
5. The ratings values apply under the following test conditions:
(1) Ambient temperature: 202C
(2) Ambient humidity: 655%RH
(3) Operating frequency: 20 operations/min
Accessories (Terminal Covers, Actuators, and Separators): Refer to Z/A/X/DZ Common Accessories and Z/X/DZ Common Accessories.
1DZ
Characteristics Engineering Data
Mechanical Durability (DZ-10G-1B)
Operating speed 0.1 mm to 1 m/s *1
10,000
Mechanical 240 operations/min
Operating
7,000 Ambient temperature: 202C
frequency
Electrical 20 operations/min Ambient humidity: 655%RH
5,000
Without load
Insulation resistance 100 M min. (at 500 VDC) Operating frequency: 240 operations/min
3,000
Contact resistance 15 m max. (initial value)
1,000 VAC, 50/60 Hz for 1 min between non-continuous terminals
1,500 VAC, 50/60 Hz for 1 min between current-carrying
Dielectric strength
1,000
metal parts and non-current-carrying metal part, and between
700
current-carrying metal part and ground and between switches
500
Vibration
Malfunction 10 to 55 Hz, 1.5-mm double amplitude *2
resistance 300
2
Destruction 1,000 m/s max.
Shock
2
resistance
Malfunction 300 m/s max. *1 *2
100
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Mechanical 1,000,000 operations min.
Durability
Overtravel (mm)
Electrical 500,000 operations min.
Electrical Durability (DZ-10G-1B)
Degree of protection IP00
1,000
Degree of protection
Ambient temperature: 202C
Class I
700
against electric shock
Ambient humidity: 655%RH
500 Operating frequency: 20 operations/min
Proof tracking index (PTI) 175
cos 1
300
Ambient operating temperature 25C to 80C (with no icing)
Ambient operating humidity 35% to 85%RH
125 VAC
Weight Approx. 30 to 50 g
100
*1. The values are for pin plunger models. (Contact your OMRON representative for other models.)
70
*2. Malfunction: 1 ms max.
50
250 VAC
Contact Specifications
30
Material Silver alloy
Contacts
Gap (standard value) 0.5 mm
10
NC 30 A max.
Inrush current 0 5 10 15
NO 15 A max.
Switching current (A)
Structure
Contact Form (DPDT)
COM2 NC2
NO2
COM1 NC1
NO1
Dimensions (Unit: mm)
Terminals
Solder Terminals (-1A) Screw Terminals (-1B)
14.5
14.5
8.2
8.2
0.1 0.1
25.4 25.4
11.9 0.2 11.9 17.450.2
17.45
49.2 49.2
23.5 16.8
23.5 16.8
COM NC NO
COM NC NO
COM NC NO
COM NC NO
Six M3 pan head screws
(with toothed washer)
Dimensions and Operating Characteristics
The solder terminal model has a suffix-1 in its model number and its omitted dimensions are the same as the corresponding dimensions of the pin plunger model.
Pin Plunger
3 dia. 2.5SR *
PT 0.25
23.3
0.4
DZ-10G-1B
OP 14.5
Operating force OF max. 5.59 N
Release force RF min. 0.56 N
8.2
Pretravel PT max. 1.7 mm
+0.075
4.2
-0.025 +0.1
4.36 dia. Overtravel OT min. 0.13 mm
-0.05
+0.075 0.2
17.45 Movement Differential MD max. 0.4 mm
11.9 4.2 dia. hole
-0.025
25.40.1
Operating Position OP 15.60.4 mm
49.2 * Stainless-steel pin plunger
2
4 4
Durability (x10 operations) Durability (x10 operations)