Proximity Sensor with All-stainless Housing E2EF Metal Head for long-distance Detection that Withstands Harsh Environments Where the Workpiece Can Rub against the Sensor Completely stainless-steel housing Long-distance detection equivalent to or greater than Proximity Sensors with Resin Heads *1 More than 20 times *2 the durability of Proximity Sensors with Resin Heads Spatter-resistant Models with fluororesin coating are available. Aluminum chip immunity Pre-wired Smartclick Connector Models are also available. *1. The actual sensing distance will vary with the size or material of the object. For details, refer to Engineering Data. *2. Test results for stainless-steel brush rotating at 130 rpm. Be sure to read Safety Precautions on page 4. Note: Models with a fluororesin coating also use vinyl chloride for the cable material and require separate protection. Ordering Information Sensors Refer to Dimensions on page 5. Standard Models (Completely stainless-steel housing) Connection method Appearance Sensing distance Output Operation mode Model M8 E2EF-X2D1 2M 2mm Shielded M12 E2EF-X3D1 2M 3mm Pre-wired Models (2m) M18 E2EF-X7D1 2M 7mm M30 E2EF-X12D1 2M 12mm DC 2-Wire NO (polarity) M8 E2EF-X2D1-M1TGJ 0.3M 2mm Shielded Pre-wired Smartclick M12 E2EF-X3D1-M1TGJ 0.3M 3mm Connector Models M18 E2EF-X7D1-M1TGJ 0.3M (M12) 7mm M30 E2EF-X12D1-M1TGJ 0.3M 12mm Spatter-resistant Models (Completely stainless-steel housing with fluororesin coating) Connection method Appearance Sensing distance Output Operation mode Model M8 E2EF-QX2D1 2M 2mm Shielded M12 E2EF-QX3D1 2M 3mm Pre-wired Models (2m) M18 E2EF-QX7D1 2M 7mm M30 E2EF-QX12D1 2M 12mm DC 2-Wire NO (polarity) M8 E2EF-QX2D1-M1TGJ 0.3M 2mm Shielded Pre-wired Smartclick M12 E2EF-QX3D1-M1TGJ 0.3M 3mm Connector Models M18 E2EF-QX7D1-M1TGJ 0.3M (M12) 7mm M30 E2EF-QX12D1-M1TGJ 0.3M 12mm Note: Vinyl chloride is used for the cable material, and separate protection is required. Accessories (Order Separately) Sensor I/O Connectors Smart Click Connectors Cable connec- No. of cable Applicable Proximity Sensor model Cable specifications Cable length Model tion direction conductors number Straight 2m 4 XS5F-D421-D80-F E2EF-X D1-M1TGJ Flame-retardant, flexible cable E2EF-QX D1-M1TGJ 5m 4 XS5F-D421-G80-F 1E2EF Ratings and Specifications Size M8 M12 M18 M30 Shielded Shielded Completely Completely Completely Completely Fluororesin Fluororesin Fluororesin Fluororesin stainless- stainless- stainless- stainless- coating coating coating coating Exterior steel housing steel housing steel housing steel housing E2EF- E2EF-X2D1 E2EF-QX2D1 E2EF-X3D1 E2EF-QX3D1 E2EF-X7D1 E2EF-QX7D1 E2EF-X12D1 QX12D1 (-M1TGJ) (-M1TGJ) (-M1TGJ) (-M1TGJ) (-M1TGJ) (-M1TGJ) (-M1TGJ) Item Model (-M1TGJ) Sensing distance 2mm10% 3mm10% 7mm10% 12mm10% Set distance 0 to 1.4 mm 0 to 2.1mm 0 to 4.9mm 0 to 8.4mm Differential travel 15% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 6.) Standard sensing object Iron, 12 12 1 mm Iron, 12 12 1 mm Iron, 30 30 1 mm Iron, 54 54 1 mm Response frequency * 200Hz 80Hz 100Hz 50Hz Power supply voltage 10 to 30 VDC, ripple (p-p) : 10% max. Leakage current 0.8 mA max. Output configuration With polarity Switching 3 to 100 mA capacity Control output Residual 3 V max.(Load current : 100 mA max., Cable length : 2 m) voltage Indicators Operation indicator (red LED), Setting indicator (green LED) Operation mode (with sensing object NO(normally open) approaching) Protection circuits Surge suppressor, Load short-circuit protection Ambient temperature Operating : 10 to 70C, Storage : 25 to 70C (with no icing or condensation) range Ambient humidity range Operating/Storage : 35% to 95% (with no condensation) Temperature influence 20% max. of sensing distance at 23C in the temperature range of 10 to 70C. Voltage influence 1% max. of sensing distance at rated voltage in the rated voltage 15% range Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case Vibration resistance Destruction : 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions 2 Destruction : 500 m/s 2 Shock resistance 10 times each in X, Y, and Z di- Destruction : 1,000 m/s 10 times each in X, Y, and Z directions rections Degree of protection IEC 60529 IP67 Unmarked : Pre-wired Models (Standard cable length : 2 m) Connection method Models ending with -M1TGJ : Pre-wired Connector Models (Standard cable length : 300 mm) Pre-wired Approx. 105 g Approx. 190 g Approx. 215 g Approx. 295 g Models (2 m) Weight (packed Pre-wired state) Connector Approx. 65 g Approx. 85 g Approx. 110 g Approx. 190 g Models Case Stainless steel (SUS303) (E2EF-QX : Fluororesin coating) Sensing Stainless steel (SUS303) (E2EF-QX : Fluororesin coating) surface (thickness) 0.2mm 0.4mm 0.4mm 0.5mm Materials Clamping Stainless steel (SUS303) (E2EF-QX : Fluororesin coating) nuts Toothed Zinc-plated iron washer Cable PVC (flame retardant) Accessories Instruction manual * The response frequency of the DC switching section is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. I/O Circuit Diagrams Operation Model Timing chart Output circuit mode Set position Unstable sensing Non-sensing Stable sensing area area area Proximity sensor Sensing < -M1TGJ > object Brown Connector Pin Load Arrangement 1 10 to 30 VDC (%) 100 70(TYP) 0 Proximity 1 E2EF-(Q)X D1 sensor NO 2 4 (-M1TGJ) main Rated circuit sensing Setting ON 3 Blue distance indicator 4 OFF (green) 0V Note: Pins 2 and 3 Note: The load can be connected to either the +V or 0 V side. are not used. Operation ON indicator OFF (red) ON Control output OFF 2