Spatter-resistant Proximity Sensor E2EQ CSM E2EQ DS E 9 1 Spatter-resistant Fluororesin- coated Proximity Sensor Superior spatter resistance. Long Sensing-distance Models added for sensing distances up to 15 mm. Pre-wired Smartclick Connector Models are also available. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 6. Ordering Information Sensors Refer to Dimensions on page 7. Pre-wired Models Long Sensing-distance Models Appearance Sensing distance Output configuration Operation mode Model M12 E2EQ-X4X1 2M 4 mm Shielded DC 2-wire M18 NO E2EQ-X8X1 2M 8 mm (no polarity) M30 E2EQ-X15X1 2M 15 mm Standard Models Appearance Sensing distance Output configuration Operation mode Model M12 E2EQ-X3D1 2M 3 mm Shielded M18 DC 2-wire NO E2EQ-X7D1 2M 7 mm M30 E2EQ-X10D1 2M 10 mm Pre-wired Smartclick Connector Models (M12) Long Sensing-distance Models Appearance Sensing distance Output configuration Operation mode Model M12 E2EQ-X4X1-M1TJ 0.3M 4 mm DC 2-wire Shielded (no polarity) M18 NO E2EQ-X8X1-M1TJ 0.3M 8 mm (3)-(4) pin arrangement M30 E2EQ-X15X1-M1TJ 0.3M 15 mm Standard Models Standard Models Sensing distance Output configuration Operation mode Model M12 E2EQ-X3D1-M1TGJ 0.3M 3 mm DC 2-wire Shielded M18 (1)-(4) NO E2EQ-X7D1-M1TGJ 0.3M 7 mm pin arrangement M30 E2EQ-X10D1-M1TGJ 0.3M 10 mm 1E2EQ Pre-wired Connector Models (M12) Long Sensing-distance Models Appearance Sensing distance Output configuration Operation mode Model M12 E2EQ-X4X1-M1J 0.3M 4 mm DC 2-wire Shielded (without polarity) M18 NO E2EQ-X8X1-M1J 0.3M 8 mm (3)-(4) pin arrangement M30 E2EQ-X15X1-M1J 0.3M 15 mm Standard Models Standard Models Sensing distance Output configuration Operation mode Model M12 E2EQ-X3D1-M1GJ 0.3M 3 mm DC 2-wire Shielded M18 (1)-(4) NO E2EQ-X7D1-M1GJ 0.3M 7 mm pin arrangement M30 E2EQ-X10D1-M1GJ 0.3M 10 mm Accessories (Order Separately) Sensor I/O Connectors (M12, Sockets on One Cable End) (Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.) Refer to XS2, XS5. Appearance Cable length Sensor I/O Connector model number Applicable Proximity Sensor model number 2 m XS2F-D421-DC0-F Straight 5 m XS2F-D421-GC0-F E2EQ-X X1-M1J 2 m XS2F-D422-DC0-F L-shape 5 m XS2F-D422-GC0-F 2 m XS2F-D421-DA0-F Straight 5 m XS2F-D421-GA0-F E2EQ-X D1-M1GJ 2 m XS2F-D422-DA0-F L-shape 5 m XS2F-D422-GA0-F 2 m XS5F-D421-D80-F Smartclick E2EQ-X X1-M1TJ Connector E2EQ-X D1-M1TGJ 5 m XS5F-D421-G80-F Straight Note: Refer to Introduction to Sensor I/O Connectors/Sensor Controllers for details. Ratings and Specifications Long Sensing-distance Models Model E2EQ-X4X1 E2EQ-X8X1 E2EQ-X15X1 E2EQ-X4X1-M1(T)J E2EQ-X8X1-M1(T)J E2EQ-X15X1-M1(T)J Item Sensing distance 4 mm 10% 8 mm 10% 15 mm 10% Set distance *1 0 to 3.2 mm 0 to 6.4 mm 0 to 12 mm Differential travel 15% max. of sensing distance Standard sensing object Iron, 12 12 1 mm Iron, 18 18 1 mm Iron, 30 30 1 mm Response frequency *2 1 kHz 0.5 kHz 0.25 kHz Load current 3 to 100 mA Control output Residual voltage *3 5 V max. (Load current: 100 mA, Cable length: 2 m) Operation mode (with sensing Load ON: NO For details, refer to the timing charts on page 5. object approaching) Protection circuits Load short-circuit protection, Surge suppressor Ambient temperature range Operating: 25 to 70C, Storage: 40 to 85C, (with no icing or condensation) 15% max. of sensing distance at 23C in the temperature range of 40 to 85C 15% max. of sensing distance at 23C in Temperature influence 10% max. of sensing distance at 23C in the temperature range of 25 to 70C the temperature range of 25 to 70C Voltage influence 1% max. of sensing distance at rated voltage in the rated voltage 15% range 2 Shock resistance Destruction: 1,000m/s 10 times each in X, Y, and Z directions Connection method Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models Pre-wired Models Approx. 65 g Approx. 140 g Approx. 190 g Weight (packed Pre-wired Approx. 20 g Approx. 40 g Approx. 90 g state) Connector Models *1. Use the Sensor within the range in which the green indicator is ON. *2. The response frequency is an average value. *3. The residual voltage is 5 V. Make sure that the device connected to the Sensor can withstand the residual voltage. 2