E2E/E2E2 Cylindrical Proximity Sensor A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Proximity Sensor Conforms to CENELEC Ideal for a variety of applications. With a metal connector that can be tightened securely and a cord protector. With an easy-to-see indicator, deeper mounting holes, and tightening flats for wrenches. The new series of E2E models includes M8 plug-in connector models. Note: Detailed information is available for the replacement of conventional E2E models with new E2E models. Ask your OMRON representative for a copy of OM- RONs E2E/E2E2 Conversion Guide. Ordering Information E2E DC 2-wire/Pre-wired Models Self-diagnostic Type Size Sensing Part number Se dagosc Se s g output functionttfti distancedi t NO NC Yes Shielded M12 3 mm E2E-X3D1S (see note 1) --- M18 7 mm E2E-X7D1S (see note 1) --- M30 10 mm E2E-X10D1S (see note 1) --- Unshielded M12 8 mm E2E-X8MD1S (see note 1) --- M18 14 mm E2E-X14MD1S (see note 1) --- M30 20 mm E2E-X20MD1S (see note 1) --- No Shielded M8 2 mm E2E-X2D1-N (see notes 1 and 2) E2E-X2D2-N M12 3 mm E2E-X3D1-N (see notes 1 and 2) E2E-X3D2-N M18 7 mm E2E-X7D1-N (see notes 1 and 2) E2E-X7D2-N M30 10 mm E2E-X10D1-N (see notes 1 and 2) E2E-X10D2-N Unshielded M8 4 mm E2E-X4MD1 (see notes 1 and 2) E2E-X4MD2 M12 8 mm E2E-X8MD1 (see notes 1 and 2) E2E-X8MD2 M18 14 mm E2E-X14MD1 (see notes 1 and 2) E2E-X14MD2 M30 20 mm E2E-X20MD1 (see notes 1 and 2) E2E-X20MD2 Note: 1. In addition to the above models, E2E-X 15 models (e.g., E2E-X3D15-N), which are different in frequency from the above mod- els, are available. 2. E2E models with a robotics cable are available as well. The model number of a model with a robotics cable has the suffix -R (e.g., E2E-X3D1-R). 1E2E/E2E2 E2E/E2E2 DC 2-wire/Plug-in Models CoConnectorec o Self-diagnosticSe dagosc Type Size SensingSe s g Part number output functionttfti didistancet NO NC M12 Yes Shielded M12 3 mm E2E-X3D1S-M1 --- M18 7 mm E2E-X7D1S-M1 --- M30 10 mm E2E-X10D1S-M1 --- Unshielded M12 8 mm E2E-X8MD1S-M1 --- M18 14 mm E2E-X14MD1S-M1 --- M30 20 mm E2E-X20MD1S-M1 --- No Shielded M8 2 mm E2E-X2D1-M1G E2E-X2D2-M1G M12 3 mm E2E-X3D1-M1G (see note) E2E-X3D2-M1G M18 7 mm E2E-X7D1-M1G (see note) E2E-X7D2-M1G M30 10 mm E2E-X10D1-M1G (see note) E2E-X10D2-M1G Unshielded M8 4 mm E2E-X4MD1-M1G E2E-X4MD2-M1G M12 8 mm E2E-X8MD1-M1G (see note) E2E-X8MD2-M1G M18 14 mm E2E-X14MD1-M1G (see note) E2E-X14MD2-M1G M30 20 mm E2E-X20MD1-M1G (see note) E2E-X20MD2-M1G M8 Shielded M8 2 mm E2E-X2D1-M3G E2E-X2D2-M3G Unshielded 4 mm E2E-X3D1-M3G E2E-X3D2-M3G Note: In addition to the above models, E2E-X D15 -M1G models (e.g., E2E-X3D15-M1G), which are different in frequency from the above models, are available DC 2-wire/Connector Extension Models Type Size Sensing distance Output configuration Polarity Part number ShieldedS e ded M12 3 mm NO Yes E2E-X3D1-M1GJ No E2E-X3D1-M1J-T M18 7 mm Yes E2E-X7D1-M1GJ No E2E-X7D1-M1J-T M30 10 mm Yes E2E-X10D1-M1GJ No E2E-X10D1-M1J-T UUnshieldeds e ded M12 8 mm Yes E2E-X8MD1-M1GJ M18 14 mm E2E-X14MD1-M1GJ M30 20 mm E2E-X20MD1-M1GJ Note: 1. A model with no polarity has a residual voltage of 5 V, which must be taken into consideration together with the interface condition (the PCs ON voltage, for example) when connecting the Proximity Sensor to a load. 2. The standard cord length is 30 cm. 50-cm and 1-m models are also available. Connector Pin Assignments of DC 2-wire Model The connector pin assignments of each new E2E DC 2-wire conforms to IEC947-5-2 Table III. The following E2E models with conventional connector pin assignments are available as well. Type Size Output Part number Sensing head Output Part number configuration configuration Shielded M8 NO E2E-X2D1-M1 Unshielded M8 NO E2E-X4MD1-M1 NC E2E-X2D2-M1 NC E2E-X4MD2-M1 M12 NO E2E-X3D1-M1 M12 NO E2E-X8MD1-M1 NC E2E-X3D2-M1 NC E2E-X8MD2-M1 M18 NO E2E-X7D1-M1 M18 NO E2E-X14MD1-M1 NC E2E-X7D2-M1 NC E2E-X14MD2-M1 M30 NO E2E-X10D1-M1 M30 NO E2E-X20MD1-M1 NC E2E-X10D2-M1 NC E2E-X20MD2-M1 2