Chemical-resistant Proximity Sensor E2FQ CSM E2FQ DS E 5 2 Inductive Profoximity Sensor with Chemical-resistant Fluororesin Case Housing and mounting are made of Fluororesin resistant to chemicals. Maximum sensing distance: 10 mm. Be sure to read Safety Precautions on page 5. Note: The cable is made of vinyl chloride and requires separate protection. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Ordering Information Sensors Refer to Dimensions on page 6. Appearance Sensing distance Output configuration Operation mode Model DC 2-wire E2FQ-X2D1 2M M12 2 mm DC 3-wire, NPN E2FQ-X2E1 2M DC 2-wire E2FQ-X5D1 2M Shielded M18 DC 3-wire, NPN E2FQ-X5E1 2M 5 mm NO AC 2-wire E2FQ-X5Y1 2M DC 2-wire E2FQ-X10D1 2M M30 DC 3-wire, NPN E2FQ-X10E1 2M 10 mm AC 2-wire E2FQ-X10Y1 2M 1E2FQ Ratings and Specifications Model E2FQ-X2E1 E2FQ-X5E1 E2FQ-X10E1 E2FQ-X2D1 E2FQ-X5D1, E2FQ-X5Y1 E2FQ-X10D1, E2FQ-X10Y1 Item Sensing distance 2 mm 10% 5 mm 10% 10 mm 10% Set distance 0 to 1.6 mm 0 to 4 mm 0 to 8 mm Differential travel E1/Y1 Models: 10% max. of sensing distance, D1 Models: 20% max. of sensing distance Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 3.) Standard sensing object Iron, 12 12 1 mm Iron, 18 18 1 mm Iron, 30 30 1 mm E1 Models: 600 Hz E1 Models: 400 Hz E1 Models: 1.5 kHz D1 Models: 500 Hz D1 Models: 300 Hz Response frequency * D1 Models: 800 Hz Y1 Models: 25 Hz Power supply voltage E1 Models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. (operating voltage Y1 Models: 24 to 240 VAC (20 to 264 VAC), 50/60 Hz range) D1 Models: 12 to 24 VDC (10 to 36 VDC), ripple (p-p): 20% max. Current consumption E1 Models: 17 mA max. Leakage current D1 Models: 0.8 mA max., Y1 Models: 1.7 mA max. (at 200 VAC) Load E1 Models: 200 mA max., D1 Models: 5 to 100 mA, Y1 Models: 5 to 300 mA current Control E1 Models: 2 V max. (Load current: 200 mA, Cable length: 2 m) output Residual Y1 Models: Refer to Engineering Data on page 3. voltage D1 Models: 3 V max. (Load current: 100 mA, Cable length: 2 m) E Models: Detection indicator (red), Y Models: Operation indicator (red), Indicators D Models: Operation indicator (red), Setting indicator (green) (NO only) Operation mode (with sensing object E1/D1/Y1 Models: NO (Refer to the timing charts under I/O Circuit Diagrams on page 5 for details.) approaching) E1 Models: Load short-circuit protection, Reverse polarity protection, Surge suppressor, D1/Y1 Models: Surge sup- Protection circuits pressor Ambient temperature Operating/Storage: 25 to 70C (with no icing or condensation) range Ambient humidity range Operating/Storage: 35% to 95% (with no condensation) Temperature influence 10% max. of sensing distance at 23C in the temperature range of 25 to 70C E1 Models: 2.5% max. of sensing distance at rated voltage in the rated voltage 15% range Voltage influence D1 Models: 2.5% max. of sensing distance at rated voltage in the rated voltage 20% range Y1 Models: 1% max. of sensing distance at rated voltage in the rated voltage 10% range Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case E1/D1 Models: 1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Dielectric strength Y Models: 4,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions 2 Destruction: 500 m/s 10 times each 2 Shock resistance Destruction: 1,000 m/s 10 times each in X, Y, and Z directions in X, Y, and Z directions Degree of protection IEC 60529 IP67, in-house standards: oil-resistant Connection method Pre-wired Models (Cable length: 2 m) Weight (packed state) Approx. 70 g Approx. 130 g Approx. 170 g Case Sensing surface Fluororesin Clamping Materials nuts Toothed Zinc-plated iron washer Cable Vinyl chloride Accessories Instruction manual * The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 2