E39-S65A Omron

9 Photoelectric Sensor with Built-in Amplifier E3Z Compact Sensor Offers Long Sensing Distance, High Noise Immunity 1 Photo-IC provides long sensing distance: 15 m for through-beam, 4 m for retroreflective and 1 m for diffuse 1 Integrated photo-IC improves noise immunity to interference from inverters and other inductive devices 1 New injection molding technology assures IP67 rating to withstand water and dust 1 Switch selectable Light-ON/Dark-ON operation 1 M8 connector-ready and 2 m pre-wired models 1 NPN or PNP output models available Ordering Information 3 SENSORS Part number Sensingg method Lightg source Appearance Connection Sensingg metthhodd ddiisttance NPN output PNP output Through-beamg IR Pre-wired 15 m E3Z-T61 E3Z-T81 Connector E3Z-T66 E3Z-T86 (See Note 1.) Polarized RED Pre-wired 100 mm to 4 m E3Z-R61 E3Z-R81 rerettrroreorefflleeccttiiveve 110000 mmmm ttoo 33 mm Connector E3Z-R66 E3Z-R86 (See Note 2.) Diffuse reflective IR Pre-wired 5to100 mm E3Z-D61 E3Z-D81 ((widide viei w)) Connector E3Z-D66 E3Z-D86 Pre-wired 1m E3Z-D62 E3Z-D82 Connector E3Z-D67 E3Z-D87 Note: 1. The Reflector is sold separately. Select the Reflector model most suited to the application. 2. Sensing distance can be extended to 4 meters when the E39-R1S reflector is used. The sensing distance is 3 meters when the E39-R1 reflector is used.E3Z E3Z 3 ACCESSORIES (ORDER SEPARATELY) Slit for Through-beam Models (E3Z--TPP) Order a slit for each emitter and receiver. Slit width Sensing distance (typical) Minimum sensing object (typical) Part number 0.5 mm dia. 50 mm 0.5 mm dia. E39-S65A 1mm dia. 200 mm 1mm dia. E39-S65B 2mm dia. 800 mm 2mm dia. E39-S65C 0.5 10 mm 1m 0.7 mm dia. E39-S65D 1 10 mm 2.2 m 1.2 mm dia. E39-S65E 2 10 mm 5m 2.4 mm dia. E39-S65F Reflectors for Retroreflective Models Name Sensing distance (typical) Part number Reflector 100 mm to 3 m E39-R1 100 mm to 4 m E39-R1S 100 mm to 5 m E39-R2 Miniature Reflector 50 mm to 1.5 m E39-R3 Tape Reflector 150 mm to 700 mm E39-RS1 150 mm to 1.1 m E39-RS2 150 mm to 1.4 m E39-RS3 Note: The actual sensing distance may be reduced to approximately 70% of the typical sensing distance when using a Reflector other than the E39-R1 or the E39-R1S. Mounting Brackets Appearance Part number Appearance Part Remarks number E39-L104 E39-L93 Adjustable height and angle for sensors. Mounted to the aluminum frame rails of conveyors and adjustable with ease. E39-L43 E39-L44 E39-L98 Vertical protective cover bracket Note: If a through-beam model is used, order two Mounting Brackets one for the emitter and one for the receiver. M8 Connectors Appearance Cable type Part number Straigght Four-wire tyype 2 m (6.56 ft) XS3F-M421-402-A 5 m (16.40 ft) XS3F-M421-405-A Rigght anglg e XS3F-M422-402-A 2 m (6.56 ft) 5 m (16.40 ft) XS3F-M422-405-A 2