E3C-LD11-2M Omron

Photoelectric Sensor with Separate Digital Amplifier (Laser-type) E3C-LDA CSM E3C-LDA DS E 4 2 Variable Laser Beam for Spot, Line, or Area Detection Long-distance detection (diffuse reflective: 1 m, retro-reflective: 7 m). Beam shape selectable from spot, line, and area types to match various applications. Adjustable spot diameter. Adjustable optical axis. The E3DC-LDA0, which supports the EtherCAT Sensor Communications Unit and the CompoNet Sensor Communications Unit, is also included in product lineup. Refer to Safety Precautions on page 9. For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Features Diffuse Reflective All three beam types provide ample long-distance Sensing Model distance of detection of 1,000 mm. 1 m. Three beam types means a wider variety of applications. Spot, Line, and Area Types At 1,000 mm: Minimum spot diameter of 950 m Suitable for various applications without any additional costs. Variable Focal Point Mechanism Mount Beam Units to a Spot Type Sensor to convert to Line or Area Type. Spot diameter can be adjusted to Optical axis alignment range: enable ultra-high-precision Approximately 2 positioning. Optical Axis Adjustment Mechanism Spot Type The sensor detection point can be easily changed. E3C-LD11 8 mm - 0.2 mm - 3.5 mm (VR minimum) (VR median) (VR maximum) At distance of 150 mm 7 mm - 28.5 mm - 33 mm (VR minimum) (VR median) (VR maximum) Line Type E3C-LD21 5 to 15 mm (VR minimum) (VR maximum) 5 to 33 mm At distance of 150 mm (VR minimum)(VR maximum) Area Type E3C-LD31 Coaxial Retroreflective Sensing Easy Sensor Installation and Sensing Characteristics distance of Model Equivalent to Through-beam Sensors. 7 m. Variable Focal Point Mechanism Optical axis alignment range: Approximately 1 to1.5 Optical Axis Adjustment Mechanism At 1 m: Minimum spot diameter of 0.8 mm E39-R13 Spot, Line, and Area Types Spot Type Coaxial Optical System E3C-LR11 The coaxial optical system and laser beam allow high-precision detection. The built-in MSR Function inhibits the effect of reflected light from the workpiece. 1E3C-LDA Ordering Information Sensor Heads (Dimensions page 12, 13) Sensing method Appearance Beam shape Model Remarks Spot Mounting a Beam Unit (sold separately) allows E3C-LD11 2M (variable) the use of line and area beams. Diffuse-reflective Line This model number is for the set consisting of the E3C-LD21 2M (variable) E39-P11 mounted to the E3C-LD11. Area This model number is for the set consisting of the E3C-LD31 2M (variable) E39-P21 mounted to the E3C-LD11. Spot Mounting a Beam Unit (order separately) E3C-LR11* 2M (variable) enables the use of line and area beams. Coaxial Retro-reflective Spot (2.0-mm E3C-LR12* 2M --- fixed dia.) * Select a Reflector (order separately) according to the application. Amplifier Units Pre-wired Amplifier Units (Dimensions page 14) Model Item Appearance Functions NPN output PNP output External- Remote setting Counter Differential operation E3C-LDA21 2M E3C-LDA51 2M input models Twin-output Area output Self-diagnosis Differential operation E3C-LDA11 2M E3C-LDA41 2M Advanced models models ATC E3C-LDA11AT 2M E3C-LDA41AT 2M ATC (Active Threshold Control) function Analog Analog output E3C-LDA11AN 2M E3C-LDA41AN 2M output Amplifier Units with Wire-saving Connectors (A Wire-saving Connector (sold separately) is required.) (Dimensions page 15, 16) Model Item Appearance Functions NPN output PNP output External- Remote setting Counter Differential operation E3C-LDA7 * E3C-LDA9 * input models Advanced Twin-output Area output Self-diagnosis Differential operation E3C-LDA6 * E3C-LDA8 * models models ATC E3C-LDA6AT E3C-LDA8AT ATC (Active Threshold Control) function * These models allow you to use an E3X-DRT21-S VER.3 Sensor Communications Unit. When using the E3X-DRT21-S VER.3, use an E3X-CN02 Connector without a Cable for the Wire-saving Connector. Amplifier Unit with Connector for Sensor Communications Unit (for EtherCAT and CompoNet) (Dimensions page 16) Applicable Sensor Item Appearance Functions Model Commuincations Unit E3X-ECT Advanced Twin-output Area output Self-diagnosis Differential operation E3C-LDA0 models models E3X-CRT Accessories (Order Separately) Wire-saving connectors (Required for models for Wire-saving Connectors.) *Protective stickers: provided. (Dimensions E3X-DA-S/MDA) Item Appearance Cable length No. of conductors Model Master 4 E3X-CN21 Connector 2 m Slave 2 E3X-CN22 Connector Ordering Precaution for Amplifier Units with Wire-saving Connectors Amplifier Units and Connectors are sold separately. Refer to the following tables when placing an order. Amplifier Unit Applicable Connector (order separately) Model NPN output PNP output Master Connector Slave Connector E3C-LDA6 E3C-LDA8 Advanced E3C-LDA7 E3C-LDA9 + E3X-CN21 E3X-CN22 models E3C-LDA6AT E3C-LDA8AT When Using 5 Amplifier Units 5 Amplifier Units + 1 Master Connector 4 Slave Connectors 2