E3SDBN112M Omron

New Product Transparent Object Detection Photoelectric Sensor E3S-DB Superb Detection of Many Types of Transparent Objects Double slits inside Sensor prevent incorrect operation. *  P-opaquing function improves detection of PET bottles and transparent films.  Smart Teaching for optimum settings in as little as 3 seconds.  Maximum sensing distance of 3.5 m.  IP69K protection recommended for food and beverage industry. Third-party certification from Ecolab in Europe for detergent resistance.  Variable connector and cable directions, and 360 indicators for greater usability. * This function uses polarization to opaque transparent objects that exhibit For the most recent information on models that have been certified for double refraction. safety standards, refer to your OMRON website. Refer to the Safety Precautions on page 7. Ordering Information Red light Sensors (Refer to Dimensions on page 8.) Model Sensing Appear- Sensitivity Connection method Sensing distance *2 method ance adjustment NPN output PNP output Pre-wired (2 m) E3S-DBN11 2M E3S-DBP11 2M Connector (M12) E3S-DBN21 E3S-DBP21 3.5 m M12 Smartclick pre- E3S-DBN31 0.3M E3S-DBP31 0.3M (with E39-R8) wired connector (0.3 m) Smart Teaching Pre-wired (2 m) E3S-DBN12 2M E3S-DBP12 2M Connector (M12) E3S-DBN22 E3S-DBP22 Narrow beam 0.5 m *1 M12 Smartclick pre- Retro- (with E39-R21) E3S-DBN32 0.3M E3S-DBP32 0.3M wired connector (0.3 m) reflective (with MSR Pre-wired (2 m) E3S-DBN11T 2M E3S-DBP11T 2M function) Connector (M12) E3S-DBN21T E3S-DBP21T 3.5 m M12 Smartclick pre- (with E39-R8) E3S-DBN31T 0.3M E3S-DBP31T 0.3M wired connector (0.3 m) Eleven-turn adjuster Pre-wired (2 m) E3S-DBN12T 2M E3S-DBP12T 2M Connector (M12) E3S-DBN22T E3S-DBP22T Narrow beam 0.5 m M12 Smartclick pre- E3S-DBN32T 0.3M E3S-DBP32T 0.3M (with E39-R21) wired connector (0.3 m) *1. A Reflector is not included with the Sensor. Select a Reflector (sold separately) according to the application. *2. There is no close-range dead zone between the Sensor and Reflector. 1E3S-DB Accessories (Sold Separately) Sensor I/O Connectors (Connector on One End) (A Connector is required for a Sensor with a connector or pre-wired connector.) Connectors are not provided with the Sensors. Be sure to order a Connector separately. Cable Cable Size Appearance Model specifications length Straight 2 m XS2F-D421-D80-F *2 5 m XS2F-D421-G80-F Fire-retardant robot *1 M12 (4 pins) cable Straight 2 m XS5F-D421-D80-F *2 5 m XS5F-D421-G80-F *1 Refer to your OMRON website for details on the XS2 and XS5. *2 The connectors will not rotate after they are connected. Reflectors (A Reflector is required for each Retro-reflective Sensor.) (Refer to Dimensions on page 10.) Reflectors are not provided with the Sensors. Be sure to order a Reflector separately. Sensing distance* Appearance Model Quantity Applicable Sensors Remarks (reference value) 3.5 m E39-R1S E3S-DB@@1(T) Standard model 2 m E39-R1K E3S-DB@@1(T) Non-fogging reflective plate 3 m E39-RP1 E3S-DB@@1(T) Special Polarizing Reflector 0.5 m (rated value) E39-R21 E3S-DB@@2(T) Narrow-beam Reflector 1 3.5 m (rated value) E39-R8 E3S-DB@@1(T) Standard model 1.5 m E3S-DB@@1(T) E39-RS10 0.5 m E3S-DB@@2(T) Sheets 2.5 m E3S-DB@@1(T) E39-RS11 0.5 m E3S-DB@@2(T) Note: 1. If you use the Reflector at any distance other than the rated distance, make sure that the stability indicator lights properly when you install the Sensor. 2. Refer to Engineering Data (Reference Value) on page 4 for details. * There is no close-range dead zone between the Sensor and Reflector. Mounting Brackets (Refer to Dimensions on page 11.) A Mounting Bracket is not provided with the Sensor. It must be ordered separately as required. Type Appearance Model Quantity Bottom-mounting E39-L192 1 Side-mounting E39-L193 Note: For details, refer to the Mounting Brackets on E39-L/E39-S/E39-R which can be accessed from your OMRON website. 2