Digital Fiber Amplifier
E3X-DA-N
CSM_E3X-DA-N_DS_E_4_1
The Ultimate Fiber Amplifier for
Maximum Ease of Use and High
Performance
UL991*
Be sure to read Safety Precautions
on page 23.
* UL certification including UL 991 testing and evaluation Applicable standards: UL 3121-1
Additional application testing and evaluations standards: UL 991 and SEMI S2-0200S
Features
Models with New Connector System Super Digital Display with Auto Power
Reduces Wiring, Saves Space, and Makes Control (APC) Circuit
Maintenance Easier
First in the Industry
First in the Industry Patent Pending
The passage of time causes the intensity of the Sensor's light-
emitting LED elements to deteriorate, which may make stable
In Amplifiers with wire-saving connectors, the power supply is
detection impossible.
distributed to 1-conductor slave connectors through a 3-
The E3X-DA-N is the first series of Fiber Sensors to use an
conductor master connector. This design has three major
Auto Power Control (APC) circuit. This achieves strict
advantages.
detection by eliminating fluctuation in the digital value and is
1. Wiring time is significantly reduced.
ideal for subtle detection such as stable detection of liquid-
2. Relay connectors are unnecessary, so wiring takes up less
crystal glass.
space and costs are reduced.
3. Storage and maintenance are simpler because it isn't
Incident level
necessary to distinguish between master connector and
slave connectors on the Amplifier.
3000
Simplified Connector Design
Up to 16 Amplifiers can
Previous Digital Threshold
be connected.
Fiber Amplifiers
Unstable detection
Time
Incident level
3000
Threshold
E3X-DA-N Series
Optical
communi-
cations
Stable detection
Power
supply pin
Master connector Slave connector
Time
1E3X-DA-N
Power Consumption Reduced by As Much Digital Display Can Be Turned OFF or
As 70% Dimmed during Operation
Eco-mode
Power consumption is When the digital display is viewed infrequently during
reduced by as much as 70% operation, current consumption can be reduced by dimming
from 1800 mW to 600 mW 1800 mW the display or turning it OFF entirely.
(when the digital display is (Eco-mode can be set from the Mobile Console only.)
OFF).
600 mW
Previous model E3X-DA-N
This eco-label is displayed on
(with digital display OFF)
products that meet
environmental standards
established by OMRON.
New Generation of Mobile Consoles the Size of Cellular Phones.
Further Developing the Ultimate Power of Fiber Amplifiers.
With group teaching, teach multiple amplifiers
Remote Setting and Adjustment
simultaneously.
Perform settings, teaching, and fine adjustments at the
end of the Fiber Unit.
The tedious teaching that had
Group teaching
to be performed separately for
Previously, settings and
each Amplifier can now be
teaching could be performed
performed for several
only on the Amplifier. Now,
Amplifiers at once using the
however, using a Mobile
Mobile Console.
Console enables these
operations at the end of the fiber.
Strict adjustments can be made
while checking the workpiece
Eliminate inconsistency by using group zero reset.
position.
The group zero reset function
can simultaneously reset the
digital displays of multiple
Display the light intensity and threshold at the same time.
Amplifiers to 0. This function is
useful to minimize variation
between Amplifier values.
New
Concept
Patent Pending
Flash the Sensor head and display the amplifier channels
during operation.
Even if the Amplifier and Sensor
Function indicator
head are separated during
section
operation, it is still possible to
Channel setting
flash the Sensor head and
section
display the amplifier channels.
Light intensity monitor
Channel 5
Threshold
Channel 4
Channel 3
Channel 2
Channel 1
Operation keys
Battery monitor
Optical communications
Head
2