E5CC-TQX3A5M-000 Omron

Programmable Temperature Controller (Digital Controller) E5CC-T (48 48 mm) Programmable Controllers Join the E5 C Series Program up to 256 segments can handle a wide variety of applications. Set up to 8 Programs (Patterns) with 32 Segments (Steps) Each The white PV display with a height of 15.2 mm improves visibility. High-speed sampling at 50 ms. Models are available with up to 3 auxiliary outputs, up to 4 event inputs, and a transfer output to cover a wide range of applications. Short body with depth of only 60 mm. Set up the Controller without wiring the power supply by connecting to 48 48 mm E5CC-T the computer with a Communications Conversion Cable (sold separately). Setup is easy with the CX-Thermo (sold separately). Refer to your OMRON website for the most recent information on applicable safety standards. Easy connections to a PLC with programless communications. Use component communications to link Temperature Controllers to each Refer to Safety Precautions on page 90. other. E5CC-T is scheduled to be released in January, 2014. Main I/O Functions E5CC-T Sensor Input Universal input Thermocouple 4-digit displays Dual displays: PV/SV Pt Analog current/voltage Control Output 1 Indication Accuracy Relay output Thermocouple input: 0.3% Voltage output (for driving of PV SSR) Pt input: 0.2% of PV Linear current output Analog input: 0.2% of FS Sampling Period Control Output 2 None 50 ms Voltage output (for driving SSR) Event Inputs None Auxiliary Outputs 2 3 4 PF (shift) Key Temperature status display Transfer Output Serial Communications Operating and editing the program None Independent heating and cooling None 1 PID control RS-485 Parameter mask setting Display brightness setting This datasheet is provided as a guideline for selecting products. Be sure to refer to the following manuals for application precautions and other information required for operation before attempting to use the product. E5 C-T Digital Temperature Controllers Programmable Type Users Manual (Cat. No. H185) E5 C-T Digital Temperature Controllers Programmable Type Communications Manual (Cat. No. H186) 1E5CC-T Model Number Legend and Standard Models Model Number Legend Models with Screw Terminals E5CC-T 3 5M (Example: E5CC-TRX3A5M-000) ABCDE F A B C D E F No. of Power Model Meaning Control outputs Terminal Input auxiliary supply Options 1 and 2 type type outputs voltage E5CC-T 48 48 mm Programmable Type Control output 1 Control output 2 RX Relay output None Voltage output QX None (for driving SSR) *1 CX Linear current output *2 None Voltage output Voltage output QQ (for driving SSR) (for driving SSR) Voltage output CQ Linear current output *2 (for driving SSR) 3 3 (one common) A 100 to 240 VAC D 24 VAC/DC 5 Screw terminals (with cover) M Universal input HB alarm Communica- Event Transfer and HS tions inputs output alarm 000 --- --- --- --- *1 001 1 --- 2 --- 2 (for 3-phase *1 003 RS-485 --- --- heaters) 004 --- RS-485 2 --- 005 --- --- 4 --- 006 --- --- 2 Provided. *1. Options with HB and HS alarms (001 and 003) cannot be selected if a linear current output is selected for the control output. *2. The linear current output cannot be used as a transfer output. Heating and Cooling Control Using Heating and Cooling Control A Control Output Assignment If there is no control output 2, an auxiliary output is used as the cooling control output. If there is a control output 2, the two control outputs are used for heating and cooling. (It does not matter which output is used for heating and which output is used for cooling.) B Control If PID control is used, you can set PID control separately for heating and cooling. This allows you to handle control systems with different heating and cooling response characteristics. 2