CSM PhotoMicro OP E 7 1 Accessories (Order Separately) Ordering Information Connectors and Connector Hold-down Clips Applicable Sensor models EE-SX67 (A, P, R), EE-SX47 , EE-SY67 , EE-SPY31 /41 , EE-SPX303N/403N, EE-SPW311/411 Type Cable length Model Remarks EE-1001 Connector EE-1001-1 L terminal and positive (+) terminal are already short-circuited. EE-1009 *1 EE-1006 1M 4 conductors 1 m EE-1010 1M *1 EE-1006 2M 4 conductors Connector with Cable EE-1006D 3 conductors 2 m EE-1006L 2 conductors EE-1010 2M *1 Connector with 1 m EE-1010-R 1M *1 Robot Cable 2 m EE-1010-R 1M*1 NPN/PNP Conversion 0.46 m EE-2002 Connector (total length) Connector Hold-down Clip EE-1006A For EE-1006, EE-SX670 , 470, EE-SY671, and 672 only. Case (housing) EE-1006H 100 per carton Dispersion Pins EE-1006C 500 per carton Appearance Connector Parts Crimping section *2 Switching knob Special Crimping Tool EE-1006T Ratchet Handle *1. EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Sensor Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled. *2. The case (housing) and dispersion pins (for hand-crimping) for EE-1006 Connectors can be ordered separately. Use the EE-1006T Special Connector Crimping Tool to prepare the Connector. Applicable Sensor models EE-SX97 -C1, EE-SX97 P-C1 Item Cable length Model Remarks 1 m EE-1017 1M Connector with Cable 3 m EE-1017 3M 1 m EE-1017-R 1M Connector with Robot Cable 3 m EE-1017-R 3M Applicable Sensor models EE-SX91 -C1J-R (Pre-wired Connector) Item Cable length Model Remarks Connector with Cable 2 m EE-1016-R The robot cable is standard for all models. Applicable Sensor models EE-SX67 -C1J-R (Pre-wired Connector) Item Cable length Model Remarks Connector with Cable 2 m EE-1016-R-1 The robot cable is standard for all models. Applicable Sensor models EE-SPX74 /84 Item Cable length Model Remarks Connector with Cable 1 m EE-1013 Applicable Sensor models EE-SPX301/401, EE-SPY30 /40 , EE-SPZ301 /401 Item Cable length Model Remarks Connector EE-1002 Connector with Cable 1 m EE-1003 NPN/PNP Conversion 0.46 m EE-2001 Connector (total length) Connector Hold-down Clip EE-1003A For EE-1003 only. 1Ratings and Specifications Connector (short-circuit- Connector with Connector with Connector with Product Connector *1 Connector ed between Cable *1 Robot Cable *1 Cable positive (+) and L terminals) *2 Model EE-1009 EE-1010 EE-1010-R EE-1001 EE-1001-1 EE-1006 Appearance Item 10 m max. Contact resistance 20 m max. (at 20 mV max., 100 mA max.) 15 m max. (at 100 VDC max.) (100 VDC max.) Insertion/removal 50 times min. --- durability Insertion strength No. of poles 6 N max. 50 N max. Surplus strength No. of poles 0.4 N max. --- 20 N max. (housing holding strength) Standard cable length --- 1 m, 2 m --- 1 m, 2 m Lock strength No. of poles 29 N min. --- Ambient humidity 10 to +60C 10 to +75C 10 to 60C Housing Polybutylene phthalate (PBT) Material Contact Phosphor bronze (solder plating) Applicable EE-SX67 (A,P,R) (Connector Models only), EE-SX47 , EE-SY67 , EE-SPY31 /41 , EE-SPX303N/403N, Photomicrosensors EE-SPW311/411 *1. The Connector has a built-in locking mechanism. To remove the Connector from the Sensor, grip the top and bottom of the Connector Sensor housing, as shown in the following diagram, and then pull out the Connector. *2. EE-SX67 and EE-SY67 are the best used in the light-ON state. Connector Connector Connector Connector Connector Product Connector with Robot Connector with Robot Cable with Cable with Cable with Cable Cable Model EE-1002 EE-1003 EE-1013 EE-1017 EE-1017-R EE-1016-R EE-1016-R-1 Appearance Item 10 m max. 20 m max. (at minute current Contact resistance (at 10 mADC 25 m max. (at 10 mA DC and 20 mV max.) of 1 kHz and 500 VDC) and 1 ADC) Insertion strength 20 N max. 23.5 N max. 40 N max. 20 N max. 15 N min. Surplus strength (initial) (housing holding 3.5 N min. 10 N min. 1.5 N min. 15 N min. 10 N min. (ten strength) times) Cable length --- 1 m 1 m, 3 m 2 m Ambient humidity 10 to +75C 10 to +60C 10 to +55C 10 to +60C 25 to +85C Housing Nylon Material Contact Phosphor bronze (solder plating) EE-SX91 -C1J-R EE-SX67 -C1J-R Applicable EE-SPX301/401, EE-SPY30 / EE-SPX74 / EE-SX97 C1, EE-SX97 P-C1 (Pre-wired (Pre-wired 40 , EE-SPZ301 /401 84 Photomicrosensors Connector) Connector) 2