EE-SPX304-W2A Omron

Slot-type Photomicrosensor with Cable EE-SPX-W CSM EE-SPX-W DS E 4 2 Photomicrosensor with built-in amplifier and attached cable reduces external light interference. Light modulation effectively reduces external light interference. Wide operation voltage range: 5 to 24 VDC Easy operation monitoring with bright light indicator. For the most recent information on models that have been certified for Be sure to read Safety Precautions on safety standards, refer to your OMRON website. page 3. Ordering Information Infrared light Sensing Sensing distance Output Output Cable Appearance Model method (slot width) type configuration length Dark-ON EE-SPX302-W2A 1M 3.6 mm Light-ON EE-SPX402-W2A 1M Dark-ON EE-SPX304-W2A 1M 3.6 mm Light-ON EE-SPX404-W2A 1M Through-beam NPN 1 m type output Dark-ON EE-SPX306-W2A 1M 3.6 mm Light-ON EE-SPX406-W2A 1M Dark-ON EE-SPX305-W2A 1M* 5 mm Light-ON EE-SPX405-W2A 1M* * These models (EE-SPX305/405-W2A only) are not conformed to CE standards. 1EE-SPX-W Ratings and Specifications Models EE-SPX302-W2A, EE-SPX402-W2A EE-SPX305-W2A EE-SPX304-W2A, EE-SPX404-W2A EE-SPX405-W2A Item EE-SPX306-W2A, EE-SPX406-W2A *1. The indicator is a GaP red LED Sensing distance 3.6 mm (slot width) 5 mm (slot width) (peak wavelength: 700 nm). *2. The response frequency was measured by Sensing object Opaque: 1 0.5 mm min. Opaque: 2 0.8 mm min. detecting the following rotating disk. Differential distance 0.05 mm max. Light source GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm Disk Indicator *1 Light indicator (red) 2 mm 2 mm 2 mm Supply voltage 5 to 24 VDC 10%, ripple (p-p): 5% max. Current consumption Average: 15 mA max. Peak: 50 mA max. NPN voltage output: Load power supply voltage: 5 to 24 VDC EE-SPX305-W2A Load current: 80 mA max. Control output OFF current: 0.5 mA max. 80 mA load current with a residual voltage of 1.0 V max. Disk 10 mA load current with a residual voltage of 0.4 V max. Disk Response frequency *2 500 Hz min. 3,000 lx max. with incandescent light or sunlight on the surface of the Ambient illumination receiver Ambient temperature Operating: 10 to +55C range Storage: 25 to +65C Operating: 5% to 85% Ambient humidity range Storage: 5% to 95% EE-SPX302-W2A EE-SPX306-W2A Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Vibration resistance Y, and Z directions 2 Shock resistance Destruction: 500 m/s for 3 times each in X, Y, and Z directions Degree of protection IEC IP50 Connecting method Pre-wired (standard cable length: 1 m) Weight 18.5 g Case Material Polycarbonate Holder I/O Circuit Diagrams NPN Output Output Model Timing charts Output circuit configuration Incident Interrupted Light indicator ON EE-SPX402-W2A (red) OFF EE-SPX404-W2A Output ON Light-ON EE-SPX405-W2A transistor OFF Light indicator (red) EE-SPX406-W2A Brown Load 1 Operates (relay) 1.5 to Releases 3 mA Load 1 H Load 2 Black L Main 5 to 24 VDC circuit Incident Load 2 Interrupted Blue Light indicator ON EE-SPX302-W2A (red) OFF * Voltage output (when the sensor is connected to a transistor circuit) EE-SPX304-W2A Output ON Dark-ON transistor EE-SPX305-W2A OFF EE-SPX306-W2A Load 1 Operates (relay) Releases H Load 2 L 2