EE-SX671P Omron

Slot-type Photomicrosensor (Non-modulated) *1 EE-SX47/67 CSM EE-SX47/67 DS E 13 2 Global Standard Slot-type photomicrosensors with 50- to 100-mA direct switching capacity. Series includes models that enable switching between dark-ON and light-ON operation. Response frequency as high as 1 kHz. Easy operation monitoring with bright light indicator. Wide operating voltage range: 5 to 24 VDC Models in which the light indicator turns ON for dark-ON operation are also available. A wide range of variations in eight different shapes. Flexible robot cable is provided as a standard feature. *2 Be sure to read Safety Precautions on page 5. For the most recent information on models that have been certified for *1. Pre-wired Models are available only in the EE-SX67 Series. safety standards, refer to your OMRON website. *2. Only for Pre-wired Models. Ordering Information Connector Infrared light Model Sensing Connect- Output Appearance Sensing distance Indicator mode method ing method configuration NPN output PNP output Incident light EE-SX670 EE-SX670P Standard Dark-ON/Light-ON (selectable) *3 *4 No incident light EE-SX670A EE-SX670R Light-ON Incident light EE-SX470 --- L-shaped Incident light EE-SX671 EE-SX671P Dark-ON/Light-ON (selectable) *3 *4 No incident light EE-SX671A EE-SX671R Light-ON Incident light EE-SX471 --- Incident light EE-SX672 EE-SX672P T-shaped, Dark-ON/Light-ON slot center (selectable) *3 *4 No incident light EE-SX672A EE-SX672R 7 mm Light-ON Incident light EE-SX472 --- Incident light EE-SX673 EE-SX673P Close- Dark-ON/Light-ON mounting (selectable) *3 *4 No incident light EE-SX673A EE-SX673R Through- beam Connector 5 mm Light-ON Incident light EE-SX473 --- type (4 poles) (slot width) (with slot) Incident light EE-SX674 EE-SX674P Close- Dark-ON/Light-ON mounting (selectable) *3 *4 No incident light EE-SX674A EE-SX674R Light-ON Incident light EE-SX474 --- T-shaped, slot center Dark-ON/Light-ON Incident light EE-SX675 EE-SX675P 10 mm (selectable) *3 *4 F-shaped Dark-ON/Light-ON Incident light EE-SX676 EE-SX676P (selectable) *3 *4 R-shaped Dark-ON/Light-ON Incident light EE-SX677 EE-SX677P (selectable) *3 *4 *3. Dark-ON when the L terminal of the connector is opened, and light-ON when the L terminal and positive (+) terminal are connected. Do not connect the L terminal to 0 V when using dark-ON operation. When using light-ON, it is useful to select the connector EE-1001-1. The L terminal and positive (+) terminal of this connector are connected in advance. *4. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from coming in contact with other terminals. 1EE-SX47/67 Pre-wired Models Infrared light Output Model Sensing Indicator Connecting Appearance Sensing distance configura- method mode method NPN output PNP output tion Standard EE-SX670P-WR EE-SX670-WR 1M 1M L-shaped EE-SX671P-WR EE-SX671-WR 1M 1M T-shaped, slot center EE-SX672P-WR EE-SX672-WR 1M 7 mm 1M Close- mounting EE-SX673P-WR EE-SX673-WR 1M 1M Through- Dark-ON/ beam Light-ON Incident Pre-wired 5 mm type (selectable) light Models (1m) (slot width) Close- (with slot) *1 *2 mounting EE-SX674P-WR EE-SX674-WR 1M 1M T-shaped, slot center EE-SX675P-WR EE-SX675-WR 1M 10 mm 1M F-shaped EE-SX676P-WR EE-SX676-WR 1M 1M R-shaped EE-SX677P-WR EE-SX677-WR 1M 1M *1. Dark-ON operation can be used when the L terminal is left unconnected or Light-ON operation can be used when the L terminal and positive (+) terminal are connected to each other. Do not connect the L terminal to 0 V when using dark-ON operation. *2. If you do not use the L terminal wire ((2) pink) when you use a Connector with Cable for an EE-1006 or EE-1010-series Photomicrosensor, noise may affect the Photomicrosensor. To prevent the effects of noise, cut the unused L terminal wire at the base of the connector and wrap it with insulating tape to prevent it from coming in contact with other terminals. Accessories (Order Separately) Connector Models Cable Type Model Remarks length Connector EE-1001 EE-1001-1 L terminal and positive (+) terminal are already short-circuited. EE-1009 * EE-1006 1M 1 m EE-1010 1M * Connector with Cable EE-1006 2M 2 m EE-1010 2M * 1 m EE-1010-R 1M * Connector with Robot Cable 2 m EE-1010-R 2M * Applicable Photomicrosensors For EE-SX670 and 470 only. Connector Hold-down Clip EE-1006A (Can be used only with EE-1006 Connectors for the Photomicrosensors listed above.) Note: For details, refer to the Photomicro Sensors Accessories on EE- which can be accessed from your OMRON website. * EE-1009- or EE-1010-series Connectors have a builtin locking mechanism to prevent cable disconnection when only the cable is pulled. To remove the Connector from the Sensor, grip the top and bottom of the Connector firmly and push into the Sensor once before pulling out. The locking mechanism prevents the Connector from being removed by pulling on the cable only and enables removal only when the Connector (housing) is pulled. 2