EE-SX770R Omron

Photomicrosensor with Slim Cable (Non-modulated) EE-SX77/87 CSM EE-SX77 87 DS E 7 3 Slim, Compact Photomicrosensor that is still easy to use. Compact, thin profile enables dense mounting. Indicator is visible from both sides. Wide operating voltage range: 5 to 24 VDC For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Be sure to read Safety Precautions on page 4. Ordering Information Pre-wired Models Infrared light Model Sensing Cable Output Appearance Sensing distance Indicator mode method length configuration NPN output PNP output Incident light EE-SX770 2M EE-SX770P 2M Standard Dark-ON No incident light EE-SX770A 2M EE-SX770R 2M Incident light EE-SX870 2M EE-SX870P 2M Light-ON No incident light EE-SX870A 2M EE-SX870R 2M Incident light EE-SX771 2M EE-SX771P 2M L-shaped Dark-ON Through-beam No incident light EE-SX771A 2M EE-SX771R 2M 5 mm type 2 m (slot width) (with slot) Incident light EE-SX871 2M EE-SX871P 2M Light-ON No incident light EE-SX871A 2M EE-SX871R 2M Incident light EE-SX772 2M EE-SX772P 2M T-shaped Dark-ON No incident light EE-SX772A 2M EE-SX772R 2M Incident light EE-SX872 2M EE-SX872P 2M Light-ON No incident light EE-SX872A 2M EE-SX872R 2M 1EE-SX77/87 Ratings and Specifications Type Standard L-shaped T-shaped NPN EE-SX770/EE-SX870 EE-SX771/EE-SX871 EE-SX772/EE-SX872 models EE-SX770A/EE-SX870A EE-SX771A/EE-SX871A EE-SX772A/EE-SX872A PNP EE-SX770P/EE-SX870P EE-SX771P/EE-SX871P EE-SX772P/EE-SX872P Item models EE-SX770R/EE-SX870R EE-SX771R/EE-SX871R EE-SX772R/EE-SX872R Sensing distance 5 mm (slot width) Sensing object Opaque: 2 0.8 mm min. Differential distance 0.025 mm Light source GaAs infrared LED with a peak wavelength of 940 nm Indicator Light indicator (red) (turns ON when light is interrupted for models with A or R suffix) Supply voltage 5 to 24 VDC 10%, ripple (p-p): 10% max. Current consumption 35 mA max. (NPN models), 30 mA max. (PNP models) NPN open collector: 5 to 24 VDC, 100 mA max. 100 mA load current with a residual voltage of 0.8 V max. 40 mA load current with a residual voltage of 0.4 V max. Control output OFF current (leakage current): 0.5 mA max. PNP open collector: 5 to 24 VDC, 50 mA max. 50 mA load current with a residual voltage of 1.3 V max. OFF current (leakage current): 0.5 mA max. Response frequency * 1 kHz min. (3 kHz average) Ambient illumination 1,000 lx max. with fluorescent light on the surface of the receiver Operating: 25 to +55C Ambient temperature range Storage: 30 to +80C (with no icing) Operating: 5% to 85% Ambient humidity range Storage: 5% to 95% (with no condensation) 2 Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s ) Vibration resistance 1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions 2 Shock resistance Destruction: 500 m/s for 3 times each in X, Y, and Z directions Degree of protection IEC60529 IP60 Connecting method Pre-wired (standard cable length: 2 m) Weight (packaged) Approx. 20 g Material Case: Polybutylene phthalate (PBT) * The response frequency was measured by detecting the following rotating disk. Disk 1 mm 1 mm 2.1 mm t = 0.2 mm 2