F03-02 SUS316 Omron

Electrodes and Accessories F03- CSM F03- DS E 9 6 A Wide Variety of Electrodes for Long Lasting Reliability Standard Electrodes are made of stainless steel (SUS 304) and can be used in applications for purified water. SUS316 Electrodes can be used in applications where resistance to corrosion is required. Titanium and HAS Electrodes can be used in applications where resistance to acid is required. For applications where long electrodes are required, a connection nut and two Lock Nuts can be used to extend the electrodes 1 m at a time. Refer to Safety Precautions for Electrodes and Electrode Holders. Ordering Information Material indications are provided on all OMRON electrodes, connection nuts, and Lock Nuts. Electrodes Select an electrode appropriate for the type of liquid. Refer to Technical Guide for Level Controllers. Model Material Weight (g) Material indication lines F03-01 SUS304 ELECTRODE SUS304 Approx. 170 1 line Electrodes F03-01 SUS316 ELECTRODE SUS316 2 lines M6 F03-01 HAS B ELECTRODE N10665 (See note) Approx. 195 3 lines F03-01 HAS C ELECTRODE N10276 (See note) Approx. 190 4 lines Material indication F03-01 TITANIUM ELECTRODE Titanium Approx. 100 5 lines lines Note: UNS No. (Unified Numbering System No.) is an international metal designation system that specifies a unique number for each material. Insulated Electrodes Connecting Nuts Electrodes are insulated with a plastic sheath to prevent them from Model Material Weight (g) Material indication touching each other and to isolate them from debris in the liquid. Before application, strip back about 10 cm of the sheath at the end to F03-02 SUS304 SUS303 Approx. 12 Blank (See note 1.) (Equivalent to SUS304) ensure sufficient conductivity. F03-02 SUS316 SUS316 6 Model Sheath (See note 1.) F03-01 SUS304 BINIL Vinyl Tubing F03-02 HAS B N10665 (See note 2.) Approx. 20 B F03-01 SUS304 FLUORORESIN Fluororesin Tubing F03-02 HAS C N10276 (See note 2.) C F03-01 SUS316 BINIL Vinyl Tubing F03-02 TITANIUM Titanium Approx. 6 T F03-01 SUS316 FLUORORESIN Fluororesin Tubing Note: 1. Spring washers made of the same material are included Note: Tubing comes in 1-m lengths with a sheath thickness of with the F03-02 SUS304 and F03-02 SUS316. 0.5 mm. Spring washers are not included with the other models. OMRON does not sell spring washers by themselves. 2. UNS No. (Unified Numbering System No.) is an international metal designation system that specifies a unique number for each material. 1F03- Electrode Sets Lock Nuts An Electrode Set consists of an electrode, a connecting nut, and two Model Material Weight Material Lock Nuts. (g) indication F03-03 SUS304 SUS303 Approx. Blank Set model Components No. of parts Weight (See note 1.) (Equivalent to SUS304) 2 in an set (g) F03-03 SUS316 SUS316 6 F03-60 SUS304 F03-01 SUS3041Approx. (See note 1.) ELECTRODE 190 F03-03 HAS B N10665 Approx. B F03-02 SUS304 1 (See note 2.) 5 F03-03 SUS304 2 F03-03 HAS C N10276 C F03-60 SUS316 F03-01 SUS316 1 (See note 2.) ELECTRODE F03-03 TITANIUM Titanium Approx. T F03-02 SUS316 1 2 F03-03 SUS316 2 Note: 1. Only SUS304 and SUS316 Lock Nuts come with spring Note: HAS and titanium Electrodes do not come in sets. washers made of the same material. HAS B, HAS C and TITANIUM dont come with spring washer. 2. UNS No. (Unified Numbering System No.) is an internation- al metal designation system that specifies a unique number for each material. Electrode Separators When long electrodes are required, use Separators at each joint (every 1 m) to prevent the Electrodes from touching each other. Use a 1-pole Separator with BF Electrode Holders. The five-pole model can be used with PS-5S and PS-4S Electrode Holders. Separators cannot be used with PS-31 Electrode Holders. Model No. of Dimensions Applicable Weight (g) Material Operating Electrodes Electrode Temperature Holder F03-14 1P 1 BF- (R) Approx. 15 Ceramic 250C max. 6.5 dia. Electrode Holder Separator 28 dia. Connecting F03-14 3P 3 Three, 7-dia. holes PS-3S(R) Approx. 30 nut Separator Spring washer 20 Lock Nut Lock Nut Connecting 41 nut Electrode Lock Nut F03-14 5P 5 Five, 7-dia. PS-4S(R) holes Note: When using two or more Separators, PS-5S(R) be careful with the mounting direction of the connecting nut screws which 20 connect electrodes. Avoid the screws from touching each other. 46 Note: The Electrode Separators cannot be used unless the Electrodes are coupled. Accessories (Order Separately) Application Model Protective Cover (for PS- S and BF-3/-5) F03-11 Mounting Frame (for PS- S) F03-12 Mounting Frame for Installing in Concrete (for PS- S(R)) F03-13 Dust-proof Rubber Cap (for PS-31) F03-31 2