G3J-T205BL-C AC100-240 Omron

Solid State Contactor for 3-phase Motors with Built-in Soft Start/Stop and Monitor Output G3J-T-C CSM_G3J-T-C_DS_E_4_1 New Models with AC Power Supply Input and Monitor Output Equivalent to Non-contact SPST-NO Join the G3J-T Series Limiting the starting current saves energy. Certified for UL and CSA. Mounts with screws or to DIN Track. Compact design with heat sinks (3.7-kW models: 100 100 130 mm (W H D)). Built-in snubber circuit and thyristor. Built-in operation indicator. For the most recent information on models that have been certified for Refer to Safety Precautions for All Solid State safety standards, refer to your OMRON website. Relays. Appearance Output terminals (power supply side) Input terminals Monitor output terminals Starting torque adjuster (default setting: 200%) Ramp-up time adjuster (default setting: 1 s) Operation indicator Ramp-down time adjuster (default setting: 1 s) Output terminals (load side) Ordering Information List of Models Number of Isolation Rated power Input method Applicable monitor capacity Monitor Model elements method supply voltage (AC3) output 3 Phototriac 100 to 240 VAC No-voltage input 3.7 kW (17.4 A) 200 to 220 VAC AC G3J-T217BL-C AC100-240 coupler switching (open and short- 2.2 kW (11.1 A) G3J-T211BL-C AC100-240 output circuited input) 0.75 kW (4.8 A) G3J-T205BL-C AC100-240 12 to 24 VDC 3.7 kW (17.4 A) DC G3J-T217BL-C DC12-24 switching 2.2 kW (11.1 A) G3J-T211BL-C DC12-24 output 0.75 kW (4.8 A) G3J-T205BL-C DC12-24 1G3J-T-C Specifications Certified Standards UL 508, CSA 22.2 No. 14 Ratings (at an Ambient Temperature of 25C) Power Supply Item Operating input power AC Model DC Model supply specifications Rated power supply voltage 100 to 240 VAC 12 to 24 VDC Operating voltage range 85 to 264 VAC 10.2 to 26.4 VDC Current consumption 40 mA max. (at 100 to 240 VAC) 70 mA max. (at 12 to 24 VDC) Operating (Input) Circuit AC Model DC Model Input No- Short-circuiting/opening terminals 3 and 1 or Input current 10 mA max. (at 12 to 24 VDC) method voltage terminals 3 and 2 Input No- Short-circuiting/opening terminals 3 and 1 or input SSR input short-circuited: Maximum method voltage terminals 3 and 2 impedance of 1 k, input SSR input turned ON: Maximum residual Maximum residual voltage of 2 V between voltage of 1 V short-circuited SSR input open: Minimum terminals impedance of SSR input turned OFF:Maximum leakage 100 k current of 0.15 mA Relay input: For minute signals Relay input: For minute signals Main Circuit (for Both AC and DC Models) Item Model G3J-T217BL-C G3J-T211BL-C G3J-T205BL-C Rated load voltage 200 to 240 VAC Rated voltage range 180 to 264 VAC Rated carry current (See note 1.) 17.4 A (at 40C) 11.1 A (at 40C) 4.8 A (at 40C) Minimum load current 0.5 A Inrush current resistance (peak value) 500 A (60 Hz, 1 cycle) 350 A (60 Hz, 1 cycle) 150 A (60 Hz, 1 cycle) Overload resistance Refer to Engineering Data on page 5 Closed current (effective value) AC3 174 A 111 A 48 A AC4 208.8 A 133.2 A 57.6 A Breaking current (effective value) AC3 139.2 A 88.8 A 38.4 A AC4 174 A 111 A 48 A Applicable 3-phase inductive motor (See note 2.) 200 to 220 VAC 200 to 220 VAC 200 to 220 VAC load (AC3, AC4, AC53-a) 3.7 kW (17.4 A) 2.2 kW (11.1 A) 0.75 kW (4.8 A) Resistive load (AC1) (See note 3.) 200 to 240 VAC 200 to 240 VAC 200 to 240 VAC 17.4 A 11.1 A 4.8 A Note: 1. The rated carry load depends on the ambient temperature. For details, refer to the Load Current vs. Ambient Temperature graph in Engineering Data. 2. Satisfies switching test conditions of AC3, AC4, and AC53-a. (Refer to Engineering Data on page 5 for the test conditions.) 3. Single-phase loads cannot be used. Monitor Output Item Operating input power AC model DC model supply specifications Rated power supply voltage 100 to 240 VAC 12 to 24 VDC Operating voltage range 85 to 264 VAC 10.2 to 26.4 VDC Rated carry current 50 mA 0.2 A Minimum load current 3 mA 3 mA 2