G3MB-202P-UTU-DC24 Omron

DISCONTINUED Solid State Relay G3MB Low cost Subminiature PCB mounting 2 amp Single in-line package (SIP) SSR Bottom is approximately 3 times smaller than G3M. Low cost SIP package switches up to 2A loads. Built in Snubber circuit and input resistor as option. Two footprints available for design flexibility. The G3MB-202PEG-4-DC20MA crosses directly to the Motorola M0C2A-60 series power triac. Ordering Information NOT FOR NEW DESIGN. Discontinuation planned for April, 2010. To Order: Specify input voltage at end of part number. Example: G3MB-202P-DC24 Isolation Output Zero Input Built-in Rated output Rated Model terminal cross resistor snubber load input pitch circuit voltage Phototriac 7.62 mm Yes Yes Yes 2 A at 100 to 240 VAC 5 VDC G3MB-202P 12 VDC 24 VDC No 2 A at 100 to 240 VAC 5 VDC G3MB-202PL 12 VDC 24 VDC 5.08 mm Yes 2 A at 100 to 240 VAC 5 VDC G3MB-202P-4 12 VDC 24 VDC No 2 A at 100 to 240 VAC 5 VDC G3MB-202PL-4 12 VDC 24 VDC Yes No No 2 A at 100 to 240 VAC N/A *(See Note) G3MB-202PEG-4-DC20MA No 2 A at 100 to 240 VAC N/A *(See Note) G3MB-202PLEG-4-DC20MA Note: 1. For versions without input voltage specified, a current limiting resistor must be placed in series with the input. See LED drive specifications and recommendations. 2. TUV versions available. When ordering models certified by VDE (TUV), add -UTU to the model number given in the above table. Solid State Relay G3MB 383DISCONTINUED Specifications Input Rating Models with Input Resistor Rated voltage Operating range Input impedance Voltage Levels (-UTU Models) Must operate Must release voltage voltage 5 VDC 4 to 6 VDC 440 20% (300 20%) 4 VDC max. 1 VDC min. 12 VDC 9.60 to 14.40 VDC 1k 20% (750 20%) 9.6 VDC max. 24 VDC 19.20 to 28.80 VDC 2.20k 20% (1.6 k 20%) 19.2 VDC max. Models without Input Resistor Input specifications Operating characteristics Rated current Continuous current Must operate current Must release current Operating current 20 mA DC 20 mA DC 7 mA DC max. 1 mA DC min. 7 to 20 mA LED forward current 50 mA max. Repetitive peak LED forward current 1 A max. LED reverse voltage 5 V max. Recommended LED Operating Conditions Models without Input Resistor Min. Standard Max. LED forward current 5 mA 10 mA 20 mA Must drop voltage 0 1 V Output Rating Model Rated load voltage Load voltage range Load current Surge current G3MB-202 100 to 240 VAC, 50/60 Hz 75 to 264 VAC 0.10 to 2 A 30 A (60 Hz, 1 cycle) Characteristics Type G3MB-202P G3MB-202PL G3MB-202PEG G3MB-202PLEG Operate time 1/2 of load power source 1 ms max. cycle + 1 ms max. Release time 1/2 of load power source cycle + 1 ms max. Output ON voltage drop 1.60 V (RMS) max. Leakage current 1.50 mA at 200 VAC Non-repetitive peak surge 30 A Output PIV (VDRM) 600 V di/dt 40 A/s dv/dt 100 V/s 2 2 I t 4 A s Junction temperature (Tj) 125 C (257 F) max. Insulation resistance 1,000 M min. at 500 VDC Dielectric strength 2500 VAC, 50/60 Hz for 1 minute Vibration Malfunction 10 to 55 Hz, 0.75 mm (0.03 in) double amplitude 2 Shock Malfunction Approx. 1,000 m/s (approx. 100 G) Ambient temperature Operating -30 to 80 C (-22 to 176 F) with no icing or condensation Storage -30 to 100 C (-22 to 212 F) with no icing or condensation Humidity Operating 45% to 85% RH Weight Approx. 5 g (0.18 oz) 384 Solid State Relay G3MB