Solid State Relay G3R-I/O Compact SSRs for I/O Interface with High Dielectric Strength Requirements High-speed models with optimum input ratings for a variety of sensors are available. Input Modules and Output Modules that have the same form-factor as the G2R. Using a coupler approved by VDE 0884 and assuring an I/O dielectric strength of 4 kV. Incorporating an easy-to-see monitoring indicator. Approved by UL, CSA, and TV. (-UTU models) Ordering Information To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5) Input Module Isolation Indicator Response speed Logic level Rated input Model voltage Supply voltage Supply current Photocoupler Yes 4 to 32 VDC 0.1 to 100 mA 100 to 240 VAC G3R-IAZR1SN High-speed 5 VDC G3R-IDZR1SN (1 kHz) 12 to 24 VDC Low-speed 5 VDC G3R-IDZR1SN-1 (10 Hz) 12 to 24 VDC Output Module Isolation Indicator Zero cross Rated output Rated input Model function load voltage Phototriac Yes Yes 2 A at 100 to 240 VAC 5 to 24 VDC G3R-OA202SZN No G3R-OA202SLN Photocoupler 2 A at 5 to 48 VDC G3R-ODX02SN 1.5 A at 48 to 200 VDC G3R-OD201SN Note: When ordering a UL, CSA and EN (TV) approved model, add -UTU to the model number as shown below: Example: G3R-OA202SZN-UTU DC5-24. I/O Indication I/O module classification and AC/DC use are indicated on the mark Mark attached to the top of the product affixed to the top of the product. Mark indication Specification AC IN Input module, AC input DC IN Input module, DC input AC OUT Output module, AC output DC OUT Output module, DC output Solid State Relay G3R-I/O 431Specifications Ratings (at an Ambient Temperature of 25C) Input Module Input Model Rated voltage Operating voltage Input current Must operate Must release voltage voltage G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min. G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. G3R-IDZR1SN-1 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. Output Model Logic level supply voltage Logic level supply current G3R-IAZR1SN 4 to 32 VDC 0.1 to 100 mA G3R-IDZR1SN G3R-IDZR1SN-1 Output Module Input Model Rated voltage Operating voltage Input current Must operate Must release voltage voltage G3R-OA202SZN 5 to 24 VDC 4 to 32 VDC 15 mA max. 4 VDC max. 1 VDC min. (at 25C) G3R-OA202SLN G3R-ODX02SN 8 mA max. G3R-OD201SN Output Model Rated load voltage Load voltage range Load current (see note) Inrush current G3R-OA202SZN 100 to 240 VAC 75 to 264 VAC 0.05 to 2 A 30 A (60 Hz, 1 cycle) G3R-OA202SLN G3R-ODX02SN 5 to 48 VDC 4 to 60 VDC 0.01 to 2 A 8 A (10 ms) G3R-OD201SN 48 to 200 VDC 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms) Note: The minimum current value is measured at 10C min. 432 Solid State Relay G3R-I/O