228 MOS FET Relays G3VM-21LR Worlds Smallest SSOP Package MOS FET Relay* with Low Output Capacitance and ON Resistance (CR = 5pF ) in a 20-V Load Voltage Model Output capacitance of 1 pF (typical) allows high frequency applications. RoHS Compliant. *Information correct as of May, 2007, according to data obtained by OMRON. Application Examples Semiconductor inspection tools Note: The actual product is marked differently from the image shown here. Measurement devices and Data loggers Broadband systems List of Models Contact form Terminals Load voltage (peak value) Model Number per tape SPST-NO Surface-mounting 20 VAC G3VM-21LR --- terminals G3VM-21LR(TR) 1,500 G3VM-21LR(TR05) 500 G3VM-21LR(TR10) 1,000 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-21LR 4.2 1.7 1.4 dia. 3.5 0.15 1.8 Note: A tolerance of 0.1 mm applies to all dimensions unless otherwise 0.3 0.2 specified. 1.27 3.8 Note: The actual product is marked differently from the image shown here. 2.04 0.2 Weight: 0.03 g 0.46 Terminal Arrangement/Internal Connections (Top View) G3VM-21LR 43 12 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-21LR 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-21LR 231 Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement conditions Input LED forward current I 50 mA Note: 1. The dielectric strength between the input and F output was checked by applying voltage be- Repetitive peak LED I 1 A 100 s pulses, 100 pps FP tween all pins as a group on the LED side and forward current all pins as a group on the light-receiving side. LED forward current I /C 0.5 T 25C mA/ C F a reduction rate LED reverse voltage V 5V R Connection temperature T 125 C j Output Load voltage (AC peak/DC) V 20 V OFF Continuous load current I 160 mA O ON current reduction rate I /C 1.6 mA/CT 25C ON a Connection temperature T 125 C j Dielectric strength between input and V 1,500 V AC for 1 min I-O rms output (See note 1.) Operating temperature T 20 to +85 C With no icing or condensation a Storage temperature T 40 to +125 C With no icing or condensation stg Soldering temperature (10 s) --- 260 C 10 s Electrical Characteristics (Ta = 25C) Mini- Maxi- Measurement Item Symbol Typical Unit mum mum conditions Input LED forward voltage V 1.0 1.15 1.3 V I = 10 mA F F Note: 2. Turn-ON and Turn-OFF Times Reverse current I --- --- 10 AV = 5 V R R IF 1 4 RL VDD Capacity between terminals C --- 15 --- pF V = 0, f = 1 MHz T VOUT 2 3 Trigger LED forward current I --- --- 4 mA I = 100 mA FT O Output Maximum resistance with output ON R --- 5 8 I = 5 mA, ON F I = 160 mA, t = 10 ms O IF Current leakage when the relay is open I --- 0.2 1.0 nA V = 20 V, Ta = 50C LEAK OFF Capacity between terminals C --- 1.0 2.5 pF V = 0, f = 100 MHz, OFF 90% t < 1 s VOUT 10% t ON t OFF Capacity between I/O terminals C --- 0.8 --- pF f = 1 MHz, V = 0 V I-O s Insulation resistance R 1,000 --- --- M V = 500 VDC, I-O I-O RoH 60% Turn-ON time t --- 0.06 0.5 ms I = 10 mA, R = 200 , ON F L V = 20 V (See note 2.) DD Turn-OFF time t --- 0.12 0.5 ms OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) V --- --- 20 V DD Operating LED forward current I 7--- 30 mA F Continuous load current (AC peak/DC) I --- --- 160 mA O Operating temperature T 25 --- 60 C a 232 MOS FET Relays G3VM-21LR