228 MOS FET Relays G3VM-41LR10 SSOP Package MOS FET Relays with Low Leakage Current, Output Capacitance and ON Resistance (C R = 5.4 pF) in a 40-V Load Voltage Model. Output capacitance of 0.45 pF (typical) allows high frequency applications. Leakage current of 0.2 nA max. (10 pA typ.) when relay is open Turn-on time = 0.026 ms (typ.) RoHS compliant Application Examples Semiconductor inspection tools Note: The actual product is marked differently from the image shown here. Measurement devices and Data loggers Broadband systems List of Models Contact form Terminals Load voltage (peak value) Model Number per tape SPST-NO Surface-mounting 40 VAC G3VM-41LR10 --- terminals G3VM-41LR10(TR05) 500 G3VM-41LR10(TR) 1,500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-41LR10 4.2 1.9 1.4 dia 3.65 0.15 Note: A tolerance of 0.1 mm applies to 1.8 all dimensions unless otherwise specified. 0.3 0.2 1.27 3.8 Note: The actual product is marked differently Weight: 0.03 g from the image shown here. 2.04 0.2 0.46 Terminal Arrangement/Internal Connections (Top View) G3VM-41LR10 43 12 Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-41LR10 0.95 3.73 0.8 1.27 MOS FET Relays G3VM-41LR10 263 Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement Conditions Input LED forward current I 30 mA Note: 1. The dielectric strength be- F tween the input and out- LED forward current I /C 0.3 mA/CT 25C put was checked by F a reduction rate applying voltage between all pins as a group on the LED reverse voltage V 5V R LED side and all pins as a group on the light-receiv- Connection temperature T 125 C j ing side. Output Load voltage (AC peak/DC) V 40 V OFF Continuous load current I 120 mA O ON current reduction rate I /C 1.2 mA/CT 25C ON a Connection temperature T 125 C j Dielectric strength between input and V 1,500 V AC for 1 min I-O rms output (See note 1.) Ambient operating temperature T 20 to +85 C With no icing or condensation a Storage temperature T 40 to +125 C With no icing or condensation stg Soldering temperature --- 260 C10 s Electrical Characteristics (Ta = 25C) Mini- Maxi- Measurement Item Symbol Typical Unit mum mum conditions Input LED forward voltage V 1.15 1.35 1.45 V I = 5 mA F F Note: 2. Turn-ON and Turn-OFF Times Reverse current I --- --- 10 AV = 5 V R R IF 1 4 RL VDD Capacity between terminals C --- 70 --- pF V = 0, f = 1 MHz T VOUT 2 3 Trigger LED forward current I --- --- 3 mA I = 100 mA FT O Output Maximum resistance with output ON R --- 12 14 I = 5 mA, ON F I = 120 mA, t < 1 s O IF Current leakage when the relay is open I --- 10 200 pA V = 35 V, T = 25C LEAK OFF a Capacity between terminals C --- 0.45 0.8 pF V = 0, f = 100 MHz, OFF 90% VOUT 10% t = < 1 s t ON t OFF Capacity between I/O terminals C --- 0.3 --- pF f = 1 MHz, V = 0 V I-O s Insulation resistance between I/O terminals R 1,000 --- --- M V = 500 VDC, I-O I-O R 60% oH Turn-ON time t --- 0.026 0.2 ms I = 5 mA, R = 200 , ON F L V = 10 V (See note 2.) DD Turn-OFF time t --- 0.14 0.3 ms OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) V --- --- 32 V DD Operating LED forward current I --- --- 20 mA F Continuous load current (AC peak/DC) I --- --- 120 mA O Operating temperature T 25 --- 60 C a 264 MOS FET Relays G3VM-41LR10