MOS FET Relays G3VM-61A1/D1 Compact, General-purpose, Analog-switching MOS FET Relay, with Dielectric Strength of 2.5 kVAC between I/O Using Optical Isolation Upgraded G3VM-61 A/D Series. Switches minute analog signals. RoHS Compliant. Application Examples Measurement devices Security systems Note: The actual product is marked differently from the image shown Amusement machines here. List of Models Contact form Terminals Load voltage (peak value) Model Number per stick Number per tape SPST-NO PCB terminals 60 VAC G3VM-61A1 100 --- Surface-mounting G3VM-61D1 terminals G3VM-61D1(TR) --- 1,500 Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-61A1 0.25 G3VM-61D1 4.58 0.25 4.58 0.25 6.4 6.40.25 7.620.25 0.25 7.62 0.80.25 +0.15 +0.15 3.65 +0.25 0.25 3.65 0.25 4.0 0.2 1.0 +0.1 0.25 0.05 min. 0.15 Note: The actual product Note: The actual product 1.2 0.15 1.2 1.0 min. is marked different- 2.5 min. is marked different- 7.85 to 8.80 10.0 max. 0.1 0.25 ly from the image 0.5 ly from the image 2.54 shown here. shown here. 2.540.25 Weight: 0.25 g Weight: 0.25 g Terminal Arrangement/Internal Connections (Top View) G3VM-61A1 43 G3VM-61D1 43 12 12 PCB Dimensions (Bottom View) Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-61A1 Four 0.8-dia. holes 2.54 (0.61) G3VM-61D1 2.54 2.54 8.3 to 8.8 (0.61) 1.3 (1.52) (1.52) 1.5 MOS FET Relays G3VM-61A1/D1 11 Absolute Maximum Ratings (Ta = 25C) Item Symbol Rating Unit Measurement conditions Input LED forward current I 50 mA Note: 1. The dielectric strength between the input and F output was checked by applying voltage be- Repetitive peak LED forward I 1 A 100 s pulses, 100 pps tween all pins as a group on the LED side and FP current all pins as a group on the light-receiving side. LED forward current I /C 0.5 mA/CTa 25C F reduction rate LED reverse voltage V 5V R Connection temperature T 125 C j Output Load voltage (AC peak/DC) V 60 V OFF Continuous load current I 500 mA O ON current reduction rate I /C 5.0 mA/CTa 25C ON Connection temperature T 125 C j Dielectric strength between input and V 2,500 V AC for 1 min I-O rms output (See note 1.) Operating temperature T 40 to +85 C With no icing or condensation a Storage temperature T 55 to +125 C With no icing or condensation stg Soldering temperature (10 s) --- 260 C10 s Electrical Characteristics (Ta = 25C) Maxi- Measurement Item Symbol Minimum Typical Unit mum conditions Input LED forward voltage V 1.0 1.15 1.3 V I = 10 mA F F Note: 2. Turn-ON and Turn-OFF Times Reverse current I --- --- 10 AV = 5 V R R IF 1 4 RL VDD Capacity between terminals C --- 30 --- pF V = 0, f = 1 MHz T VOUT 2 3 Trigger LED forward current I --- 1.6 3 mA I = 500 mA FT O Output Maximum resistance with output ON R --- 1 2 I = 5 mA, ON F I = 500 mA O IF Current leakage when the relay is open I --- 0.001 1.0 AV = 60 V LEAK OFF Capacity between terminals C --- 130 --- pF V = 0, f = 1MHz 90% OFF VOUT 10% t ON t OFF Capacity between I/O terminals C --- 0.8 --- pF f = 1 MHz, V = 0 V I-O s Insulation resistance R 1,000 --- --- M V = 500 VDC, I-O I-O R 60% oH Turn-ON time t --- 0.8 2.0 ms I = 5 mA, R = 200 , ON F L V = 20 V (See note 2.) DD Turn-OFF time t --- 0.1 0.5 ms OFF Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) V --- --- 48 V DD Operating LED forward current I 57.5 25 mA F Continuous load current (AC peak/DC) I --- --- 500 mA O Operating temperature T 20 --- 65 C a 12 MOS FET Relays G3VM-61A1/D1