- G5V-2 Low Signal Relay General-purpose, Low-cost, Two-pole Relays for Signal Circults General-purpose DIL terminal layout. Wide switching power of 10 A to 2 A. Fully-sealed type Relays standardized with bifurcated crossbar contacts. Highly reliable in addition to its high environment resistance. Conforms to FCC Part 68 (impulse withstand voltage of 1,500 V for 10 x 160 s between coil and contacts and between contacts of the same polarity). High dielectric strength at 1,000 VAC between coil and contacts, and 750 VAC between contacts of the same polarity. UL and CSA standard approved. RoHS Compliant Model Number Legend Application Examples 1. Number of Poles/ Contact form 2. Classification Telecommunication equipment G5V- - 2: 2-pole/DPDT (2c) None: Standard Security equipment 12 H1: High-sensitivity G Ordering Information Characteristics 5 V Minimum Item Classification Standard High-sensitivity Enclosure Contact Terminal Rated coil Model packing Contact resistance *1 50 m max. 100 m max. rating form shape voltage 2 Classification unit Operate time 7 ms max. 3 VDC Release time 3 ms max. 5 VDC Insulation resistance *2 1,000 M min. (at 500 VDC) 6 VDC Between coil and 1,000 VAC, 50/60 Hz for 1 min Standard G5V-2 9 VDC contacts 12 VDC Dielectric Between contacts 750 VAC, 50/60 Hz 500 VAC, 50/60 Hz for PCB Fully DPDT 25 24 VDC strength of the same polarity for 1 min 1min sealed (2c) pcs/tube terminals 48 VDC Between contacts 1,000 VAC, 50/60 Hz for 1 min of different polarity 5 VDC Between coil and 12 VDC High- 1,500 V (10 x 160 s) contacts G5V-2-H1 sensitivity 24 VDC Impulse Between contacts withstand 1,500 V (10 x 160 s) 48 VDC of the same polarity voltage Note: When ordering, add the rated coil voltage to the model number. Between contacts 1,500 V (10 x 160 s) Example: G5V-2 DC3. of different polarity Rated coil voltage 10 to 55 to 10 Hz, 0.75 mm single amplitude Destruction (1.5 mm double amplitude) Vibration However, the notation of the coil voltage on the product case as well as resistance 10 to 55 to 10 Hz, 0.75 mm single amplitude on the packing will be marked as VDC. Malfunction (1.5 mm double amplitude) 2 Destruction 1,000 m/s Shock resistance 2 2 Malfunction 200 m/s 100 m/s 15,000,000 operations min. Mechanical (at 36,000 operations/hr) AC: 100,000 operations Durability 100,000 operations min., DC: 300,000 Electrical min. (at 1,800 operations min. operations/hr) (at 1,800 operations/hr) Failure rate (P level) (reference 10 A at 10 m VDC value) *3 -25C to 65C -25C to 70C Ambient operating temperature (with no icing or (with no icing or condensation) condensation) Ambient operating humidity 5% to 85% Weight Approx. 5 g Note: The above values are initial values. *1. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method. *2. The insulation resistance was measured with a 500 VDC megohmmeter applied to the same parts as those used for checking the dielectric strength. *3. This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 . This value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating conditions. 1- G5V-2 Low Signal Relay Ratings Coil Contacts Must Must Classification Standard High-sensitivity Max. operate release Rated Coil Power Load Resistive load voltage Rated Classification current resistance voltage voltage consumption Contact type Bifurcated crossbar voltage (V) (V) (V) (mA) () (mW) Contact material Ag + Au-alloy % of rated voltage 0.5 A at 125 VAC 0.5 A at 125 VAC Rated load 3 VDC 166.7 18 2 A at 30 VDC 1 A at 24 VDC 5 VDC 100 50 Rated carry current 2 A 6 VDC 83.3 72 Max. switching voltage 125 VAC, 125 VDC 75% 5% 120% Approx. 500 Standard 9 VDC 55.6 162 Max. switching current 2 A 1 A max. min. (at 23C) 12 VDC 41.7 288 24 VDC 20.8 1,152 48 VDC 12 4,000 Approx. 580 5 VDC 30 166.7 Approx. 150 180% 12 VDC 12.5 960 (at 23C) High- 75% 5% 24 VDC 8.33 2,880 Approx. 200 sensitivity max. min. 150% 48 VDC 6.25 7,680 Approx. 300 (at 23C) Note 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%. 2.Operating characteristics are measured at a coil temperature of 23C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil. Engineering Data G Maximum Switching Capacity Durability 5 Standard/G5V-2 High-sensitivity/G5V-2-H1 Standard/G5V-2 High-sensitivity/G5V-2-H1 V 5 100 5 100 2 24 VDC resistive load 3 50 50 30 VDC resistive load 2 AC resistive load 30 30 AC resistive load 1 1 125 VAC resistive load 0.7 10 10 0.5 0.5 DC resistive load 5 125 VAC resistive load 5 DC resistive load 0.3 3 3 0.2 0.1 0.1 1 1 0 10 30 50 100 300 500 0 1 2 3 0 10 30 50 70 125 300 500 0.5 1 1.5 Switching voltage (V) Switching current (A) Switching voltage (V) Switching current (A) Ambient Temperature vs. Maximum Coil Voltage Standard/G5V-2 High-sensitivity/G5V-2-H1 160 200 3 to 24 VDC 180 140 3 to 24 VDC 160 120 140 100 120 48 VDC 48 VDC 80 100 60 80 0 20 40 60 80 100 120 0 20 40 60 80 Ambient temperature (C) Ambient temperature (C) Note: The maximum coil voltage refers to the maximum value in a varying range of operating power voltage, not a continuous voltage. Ambient Temperature vs. Must Operate or Must Release Voltage Shock Malfunction Standard/G5V-2 High-sensitivity/G5V-2-H1 Standard/G5V-2 High-sensitivity/G5V-2-H1 100 100 Y Y 1,000 1,000 Sample: G5V-2 Sample: G5V-2-H1 Number of Relays: 10 pcs Number of Relays: 10 pcs max. 800 800 max. X 80 X 80 600 600 min. min. X X Z Z 1,000 1,000 1,000 1,000 400 400 200 200 60 60 200 200 max. X 40 40 De- De- 400 400 min. 1,000 1,000 max. 1,000 1,000 energized energized X Z X Z X 600 600 min. 800 800 20 20 Shock direction Shock direction X X X X Energized Energized 1,000 1,000 Must operate voltage Must operate voltage Y Y Y Y Must release voltage Must release voltage 2 Z 2 0 0 Z Unit: m/s Unit: m/s -60 -40 -20 0 20 40 60 80 100 120 -60 -40 -20 0 20 40 60 80 100 120 Sample: G5V-2 12 VDC Z Sample: G5V-2-H1 12 VDC Z Y Y Number of Relays: 10 pcs Number of Relays: 10 pcs Ambient temperature (C) Ambient temperature (C) Conditions: Shock is applied in X, Y, and Z directions three times each with and without energizing the Relays to check the number of contact malfunctions. 2 Switching current (A) Maximum coil voltage (%) On the basis of rated voltage (%) Maximum coil voltage (%) Switching current (A) On the basis of rated voltage (%) 4 Durability (x10 operations) 4 Durability (x10 operations)