Low Signal Relay
G6A
Fullly Sealed Relay with High Impulse Withstand
High sensitivity can be driven by digital circuits.
Low-profile design allows use in 12.70 mm PC board rack.
Surge withstand voltage meet s FCC Part 68 regulation.
Units can be mounted side by side due to low magnetic
leakage.
Special models available for low thermoelectromotive force.
Unique moving loop (permanent magnet) armature reduces
relay size, magnetic interference, and contact bounce time.
Single or dual coil winding types available.
RoHS Compliant
RC FCC
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G6A-274P-ST-US-DC12).
Non-latching
Type Contact form Model
Ag (Au clad)
Standard DPDT G6A-274P-ST-US
Low-sensitivity DPDT G6A-274P-ST40-US
Latching
Single Coil
Type Contact form Model
Ag (Au clad)
Standard DPDT G6AU-274P-ST-US
Dual Coil
Type Contact form Model
Ag (Au clad)
Standard DPDT G6AK-274P-ST-US
Low-sensitivity DPDT G6AK-274P-ST40-US
Low Signal Relay G6A 67Specifications
Contact Data
Type G6A-274P-ST(40)-US
G6AK-274P-ST(40)-US
G6AU-274P-ST-US
Load Resistive load (p.f. = 1) Inductive load (p.f. = 0.4)
(L/R = 7 ms)
Rated load 0.50 A at 125 VAC, 0.3 A* at 125 VAC,
2 A at 30 VDC 1 A at 30 VDC
Contact material Ag (Au clad)
Carry current 3 A
Max. operating voltage 250 VAC, 220 VDC
Max. operating current 2 A 1 A
Max. switching capacity 125 VA, 60 W 62.50 VA, 30 W
Min. permissible load (See note) 10 A, 10 mVDC
* 0.25A at 125VAC for latching models
6
Note: P level: = 0.1 x 10 /operation
60
This value was measured at a switching frequency of 60 operations/min and the criterion of contact resistance is 50 . This value may vary
depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating conditions.
Coil Data
Standard Non-latching DPDT (G6A-274P-ST-US)
Rated Rated Coil Coil inductance Pick-up Dropout Maximum Power
voltage current resistance (ref. value) (H) voltage voltage voltage consumption
(VDC) (mA) () (mW)
Armature Armature % of rated voltage
OFF ON
3 66.70 45 0.07 0.065 70% max. 10% min. 200% Approx. 200
at 23C
4.5 44.6 101 0.16 0.14
5 40 125 0.20 0.18
6 33.30 180 0.29 0.26
9 22.20 405 0.63 0.57
12 16.70 720 1.10 1.06
24 8.30 2,880 4.50 4.10
48 4.90 9,750 13.70 12.50 Approx. 235
Low-sensitivity Non-latching DPDT (G6A-274P-ST40-US)
Rated Rated Coil Coil inductance Pick-up Dropout Maximum Power
voltage current resistance (ref. value) (H) voltage voltage voltage consumption
(VDC) (mA) () (mW)
Armature Armature % of rated voltage
OFF ON
3 133.30 22.50 0.03 0.02 70% max. 10% min. 150% Approx. 400
at 23C
4.5 88.9 50.6 0.065 0.06
5 80 62.50 0.08 0.07
6 66.70 90 0.11 0.10
9 44.30 203 0.27 0.23
12 33.30 360 0.52 0.43
24 16.70 1,440 2.10 1.80
48 8.30 5,760 7.50 6.40
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with a tolerance of 10%.
2. Operating characteristics are measured at a coil temperature of 23C.
3. The maximum voltage is the highest voltage that can be imposed on the relay coil.
68 Low Signal Relay G6A