9 SYSMAC Remote Vertical Module G72C-V Slim Profile Terminal Combines Wiring Block and Transmission Capability in One Module 1 Shallow mounting depth of 45 mm (1.77 inch) helps reduce control panel size 1 Two-conductor cable communications available using Omron Wired Remote I/O Master Modules (C200H-RM201 and C500-RM201) 1 Can share transmission lines with G72C Remote Terminal Blocks 1 187.5 kbps communication speed with maximum 200 m transmission distance 1 Isolated transmission lines ensure excellent noise immunity 1 Easily mounts to DIN rail track or with screws for panel mounting Ordering Information Classification Internal I/O circuit common I/O points Rated voltage Part number 16 per module 24 VDC For input NPN (+ common) G72C-VID16 DC24V For output NPN (-- common) G72C-VOD16 DC24VG72C-V G72C-V Specifications 3 RATINGS G72C-VID16 Input Rated input voltage 24 VDC Input current 9.7 mA/point ON delay time 1.5 ms max. OFF delay time 1.5 ms max. Number of circuits 16 points (8 points/common) ON voltage 15 VDC max. OFF voltage 5.6 VDC max. Insulation method Photocoupler Input indication LEDs (green) G72C-VOD16 Output Rated input voltage 24 VDC Rated output current 0.3 A/point, 2.4 A/module Residual voltage 1.2 V max. Leakage current 100 Amax. Number of circuits 16 points (8 points/common) Insulation method Photocoupler Input indication LEDs (green) 3 CHARACTERISTICS Communication system Two-conductor, half duplex Synchronization method Asynchronous Transmission speed (baud rate) 187.5 kbps (transmission time: 2 ms max. per G72C-V) Transmission distance 200 m (total length) Transmission path Two-conductor cable (VCTF 0.75 x DPDT recommended) Interface RS-485 +10% Operating voltage range 24 VDC / --15% Current consumption (See Note) 24 VDC: 200 mA max. RUN output SPST-NO contact output (closed during operation) Contact capacity: 100,000 operations at 2 A, 250 VAC (cos =1) Diagnostics Transmission error check (BCC plus inverted two-transmission verification check), CPU error monitor Insulation resistance 20 M min. at 250 VDC Dielectric strength 2,000 VAC, 50/60 Hz for 1 min between RUN output circuit and other terminals 500 VAC, 50/60 Hz for 1 min for other terminals Noise immunity Noise level: 1.5 kV pulse width: 100 ns to 1Ps Vibration resistance 10 to 55 Hz, 0.75--mm double amplitude for 2 hrs each in X, Y, and Z directions (both mounted and not mounted to DIN track) Shock resistance 50G, 3 times each in X, Y, and Z directions Ambient temperature Operating: 0 Cto55 C(32 F to 131 F) Ambient humidity Operating: 35% to 85% Mounting strength No damage when 5 kgf (4.9 N) pull load was applied for 1 s in all directions (except for 1 kgf (0.9 N) in direction of rail) Terminal strength No abnormality when 5 kgf (4.9 N) pull load was applied for 1 s in all directions Weight Approx. 380 g Approvals UL recognized, File No. E41515 CSA certified, File No. LD31928 Note: Consumption when all 16 points are ON. Excludes external current for Remote Input Terminal and external load current for Re-- mote Output Terminal. Maximum current consumption for both input and output when all points are OFF will be 40 mA at 24 VDC. 2