DC Power Relays (60-A, 100-A Models) G9EA-1 DC Power Relays Capable of Interrupting High- voltage, High-current Loads A compact relay capable of switching 400-V 60-A/100-A DC loads. (Capable of interrupting 600 A at 300 VDC max.) The switching section and driving section are gas-injected and her- metically sealed, allowing these compact relays to interrupt high- capacity loads. The sealed construction also requires no arc space, saves space, and helps ensure safe applications. Downsizing and optimum design allow no restrictions on the mounting direction. Terminal Cover and DIN Track Adapters are also available for in- dustrial applications. UL/CSA standard UL508 approved. Model Number Structure Model Number Legend G9EA- - - - 12 3 4 1. Number of Poles 1: 1 pole 2. Contact Form Blank:SPST-NO 3. Coil Terminals B: M3.5 screw terminals Blank:Lead wire output 4. Special Functions CA: High-current conduction (100 A) Ordering Information List of Models Models Terminals Contact form Rated coil voltage Model Coil terminals Contact terminals Switching/current con- Screw terminals Screw terminals SPST-NO 12 VDC G9EA-1-B duction models 24 VDC Lead wires G9EA-1 48 VDC High-current conduc- Screw terminals G9EA-1-B-CA 60 VDC tion models Lead wires 100 VDC G9EA-1-CA Note: 1. Relays come with two M5 screws for the main terminals (contacts). 2. Relays with coil terminals and screw terminals come with two M3.5 screws. DC Power Relays (60-A, 100-A Models) G9EA-1 1Specifications Ratings Coil Rated voltage Rated current Coil resistance Must-operate Must-release Maximum voltage Power voltage voltage (See note 3.) consumption 12 VDC 417 mA 28.8 75% max. of rated 8% min. of rated 130% of rated volt- Approx. 5 W voltage voltage age 24 VDC 208 mA 115.2 48 VDC 102 mA 469.3 60 VDC 86.2 mA 695.7 Approx. 5.2 W 100 VDC 53.6 mA 1,864 Approx. 5.4 W Note: 1. The figures for the rated current and coil resistance are for a coil temperature of 23 C and have a tolerance of 10%. 2. The figures for the operating characteristics are for a coil temperature of 23C. 3. The figure for the maximum voltage is the maximum voltage that can be applied to the relay coil for period of 10 minutes at an ambient temperature of 23 C. It does not apply to continuous operation. Contacts Item Resistive load G9EA-1(-B) G9EA-1(-B)-CA Rated load 60 A at 400 VDC, 100 A at 120 VDC 30 A at 400 VDC Rated carry current 60 A 100 A Maximum switching voltage 400 V 400 V Maximum switching current 100 A 30 A Characteristics Item G9EA-1(-B) G9EA-1(-B)-CA Contact resistance (See note 2.) 30 m max. (0.6 m typical) 10 m max. (0.3 m typical) Contact voltage drop 0.1 V max. 0.1 V max. (for a carry current of 60 A) (for a carry current of 100 A) Operate time 50 ms max. Release time 30 ms max. Insulation resistance Between coil and contacts 1,000 M min. (See note 3.) Between contacts of the same 1,000 M min. polarity Dielectric strength Between coil and contacts 2,500 VAC, 1 min Between contacts of the same 2,500 VAC, 1 min polarity Impulse withstand voltage (See note 4.) 4,500 V 2 Vibration resistance Destruction 10 to 55 to 10 Hz, 0.75-mm single amplitude (Acceleration: 2.94 to 88.9 m/s ) 2 Malfunction 10 to 55 to 10 Hz, 0.75-mm single amplitude (Acceleration: 2.94 to 88.9 m/s ) 2 Shock resistance Destruction 490 m/s 2 Malfunction 196 m/s Mechanical endurance (See note 5.) 200,000 ops. min. Electrical endurance (See note 6.) 120 VDC, 100 A, 3,000 ops. min. 400 VDC, 30 A, 1,000 ops. min. 400 VDC, 60 A, 3,000 ops. min. 120 VDC, 30 A, 2,500 ops. min. 400 VDC, 30 A, 30,000 ops. min. Short-time carry current 100 A (10 min) 150 A (10 min) Maximum interruption current 600 A at 300 VDC (5 times) Overload interruption 180 A at 400 VDC (100 times min.) 100 A at 120 VDC (150 times min.) Reverse polarity interruption 60 A at 200 VDC (1,000 times min.) Ambient operating temperature 40 to 70 C (with no icing or condensation) Ambient operating humidity 5% to 85% Weight Approx. 310 g Note: 1. The above values are initial values at an ambient temperature of 23 C unless otherwise specified. 2. The contact resistance was measured with 1 A at 5 VDC using the voltage drop method. 3. The insulation resistance was measured with a 500-VDC megohmmeter. 4. The impulse withstand voltage was measured with a JEC-212 (1981) standard impulse voltage waveform (1.2 50 s). 5. The mechanical endurance was measured at a switching frequency of 3,600 operations/hr. 6. The electrical endurance was measured at a switching frequency of 60 operations/hr. 2 DC Power Relays (60-A, 100-A Models) G9EA-1