Mechatronic Analog Timer H3AM Large Setting Dial and Moving Pointers Ideal for Easy Operation and Monitoring Incorporating an easy-to-see large setting dial with moving pointers. Wide time-setting range of 0.2 s to 60 h (available through three time-range model types) Wide AC power supply range (100 to 240 VAC) IP65 watertight and dust-tight front panel. Approved by UL and CSA. Conforms to IEC61812-1 (VDE0435/P2021) Conforms to IEC60664-1 (VDE0110) 4KV/2 R C Conforms to EMC standards. Six-language instruction manual provided. Programmable contact enables the building of a self-holding relay circuit as well as built-in instantaneous contact. (-NS) Memory retention (-NSR) Finger protection terminal block High immunity to inverter noise Enables easy sequence checks through instanta- neous outputs for a zero set value at any time range Ordering Information Rateda ed supplysupp y Resettingese g CoControl outputo ou pu Time range voltagelt systemt 0.5 s to 30 h 1 s to 60 h (60 s, 0.2 s to 12 h (30 s, 3 min, 6 min, 60 min, 6 (12 s, 120 s 30 min, 3 h, 30 h) h, 60 h) 12 min, 120 min, 12 h) 100 to 240 VAC Self-resetting DPDT contact output H3AM-NS-A H3AM-NS-B H3AM-NS-C (Time-limit output SPDT and switchable SPDT (time-limit instantaneous)) Electric DPDT contact output H3AM-NSR-A H3AM-NSR-B H3AM-NSR-C resetting (Time-limit output SPDT and instantaneous output SPDT) Model Number Legend H3AM - NS - - 12 3 2. Time Range 1. Resetting System 3. Accessory A: 0.5 s to 30 h None:Self-resetting None: Without accessory B: 1 s to 60 h R: Electric resetting 300: Waterproof Packing C: 0.2 s to 12 h (Y92S-35) provided Accessory Item Model Waterproof Packing Y92S-35 1H3AM H3AM Specifications General Operating mode ON-delay Screw tightening torque 0.98 N m (10 kgf) max. Input type Voltage input Output type Relay: DPDT Mounting method Flush/Panel mounting, no restriction on mounting angle. Approved standards UL 508, CSA C22.2 No. 14 Conforms to EN61812-1 (VDE0435/P2021), IEC60664-1 (VDE01104 kV/2, VDE0106/P100) Conforms to EN50081-2 and EN50082-2 Time Ranges Set time unit Modelode Fullu scale onscaeo didiall s 10 s min 10 min h (hour) 10 h (hour) H3AM- -A 3 --- 0.5 to 30 s 0.05 to 3 min 0.5 to 30 min 0.05 to 3 h 0.5 to 30 h H3AM- -B 6 --- 1 to 60 s 0.1 to 6 min 1 to 60 min 0.1 to 6 h 1 to 60 h H3AM- -C 12 0.2 to12 s 2 to 120 s 0.2 to 12 min 2 to 120 min 0.2 to 12 h --- Note: Instantaneous output is obtained by turning the time setting knob below 0 until the time setting knob stops. Ratings Rated supply voltage 100 to 240 VAC (50/60 Hz) Operating voltage range 85% to 110% of rated supply voltage Power reset (-NS) Minimum power-opening time: 0.5 s Reset input time (-NSR) Minimum input time: 0.5 s Reset voltage range (-NSR) H level: 85 to 264 VAC L level: 0 to 10 VAC Power consumption Approx. 9 VA (Approx. 5 W) Control output Contact output: 5 A at 250 VAC, resistive load (cos = 1) Ambient temperature Operating: 10C to 55C (with no icing) Storage: 25C to 65C (with no icing) Ambient humidity Operating: 35% to 85% 2