Solid-State Timer H3CA 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range n 8 field-selectable operation modes n Universal AC/DC supply voltage timers available n Operations include ON-delay, Repeat cycle, Signal Interval/OFF-delay, Signal-OFF delay (I and II), Interval, Cycle and Signal ON-delay/OFF-delay n Selectable no-voltage start, reset, gate and check inputs expand capabilities n Time remaining LCD bar graph and LCD output status indicator n Panel mounting adapters, sockets, and accessories may be ordered separately Ordering Information n TIMERS Add the supply voltage to the part number when you order ON-delay only timers H3CA-8 and H3CA-8H. For example, H3CA-8H-AC/100/110/120. Timing function 8 field-selectable functions ON-delay only Time limit SPDT SPDT SPDT DPDT Contact type Instantaneous SPDT Terminal form 11-pin round socket Front mounted 8-pin round socket screw terminals Part number H3CA-A H3CA-FA H3CA-8H H3CA-8 Supply AC 24 to 240 V, 50/60 Hz or Specify 24 V, 100/110/120 V, or 200/220/240 V 50/60 Hz voltages DC 12 to 240 V Specify 12 V, 24 V, 48 V or 110 V n ACCESSORIES Description Part number Sockets H3CA-A timer Bottom surface or track mounting, top screw terminals P2CF-11 Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3GA-11 H3CA-8, Bottom surface or track mounting, top screw terminals P2CF-08 H3CA-8H timers Back mounting, for use with Y92F-30 mounting adapter, bottom screw terminals P3G-08 Panel mounting Fits behind panel, ideal for side by side installation. Use P3G-qq sockets. Y92F-30 adapters Installs through panel front timer face fits bezel, rear of timer clips to adapter. Y92F-70 Use P3G-qq sockets. Fits 65-66 mm (2.56 - 2.59 in) x 52-53 (2.04 x 2.09 in) panel cutout. Charcoal gray face plate measures 88 H x 58 W mm (3.46 x 2.28 in). Installs through panel front timer face fits bezel, rear of timer clips to adapter. Y92F-71 Use P3G-qq sockets. Fits 55 x 45 mm (2.17 x 1.77 in) panel cutout. Charcoal gray face plate measures 58 H x 50 W mm (2.28 x 1.97 in). Protective cover Hard plastic cover not for use with Y92F-70 or Y92F-71 panel adapters. Y92A-48B Soft plastic cover not for use with Y92F-70 or Y92F-71 panel adapters. Y92A-48D Mounting track DIN rail, 50 cm (1.64 ft) length PFP-50N DIN rail, 1 m (3.28 ft) length PFP-100N End plate PFP-M Spacer PFP-S H3CA 1H3CA H3CA n RANGE AND OPERATION MODE SELECTION Time unit Timing range Mode Operation 0.1 s 0.1 to 99.9 seconds A ON-delay s 1 to 999 seconds B Repeat cycle 0.1 m 0.1 to 99.9 minutes C Signal Interval/OFF-delay Operation Time unit m 1 to 999 minutes D Signal OFF-delay I mode selector 0.1 h 0.1 to 99.9 hours E Interval selector* h 1 to 999 hours F Cycle 10 h 10 to 9990 hours G Signal ON-delay/OFF-delay H Signal OFF-delay II Time setting switches Note: *Operation mode selector not included with ON-delay only models. Specifications Part number H3CA-A H3CA-FA H3CA-8H H3CA-8 AC 24 to 240 V, 50/60 Hz 24 V, 100/110/120 V, 200/220/240 V 50/60 Hz Supply voltage DC 12 to 240 V 12 V, 24 V, 48 V, 110 V, (permissible ripple factor: 20% max. using single-phase, full- wave rectified power sources) Operating voltage 90 to 110% of rated voltage AC 3 VA 10 VA Power consumption DC 3 W 2W Timing 8 field-selectable modes: ON-delay, Repeat ON-delay only functions cycle, Signal Interval/OFF-delay, Signal ON-/ OFF-delay, Signal OFF-delay (I and II), Interval and Cycle Start, reset, gate inputs No voltage No voltage Control Type Time limit SPDT SPDT DPDT output Instantaneous SPDT Max. load 3 A, 250 VAC (p.f. = 1) Min. load 10 mA, 5 VDC Repeat accuracy 0.3%, 0.05 sec (includes variation due to voltage and temperature changes) Setting error 0.5%, 0.05 sec Resetting system Power-OFF, external and self-reset Power-OFF Resetting time 0.5 sec max. 0.1 sec max. Indicators Time Remaining (LCD bar graph), Output Status (LCD message) Materials Plastic case Mounting Panel, track, surface Connections 11-pin round socket Terminal screws 8-pin round socket Weight 110 g (3.9 oz) 190 g (6.7 oz) 110 g (3.9 oz) Approvals UL/CSA/SEV Operating ambient temperature -10 to 55C (14 to 131F) Humidity 35 to 85% RH Vibration Mechanical durability 10 to 55 Hz 0.75 mm (0.03 in) double amplitude Malfunction durability 10 to 55 Hz 0.5 mm (0.02 in) double amplitude Shock Mechanical durability 100 G Malfunction durability 10 G Variation due to voltage change SeeRepeat Accurac Variation due to temperature change SeeRepeat Accurac Insulation resistance 100 M min. at 500 VDC Dielectric strength 2,000 VAC, 50/60 Hz for 1 minute between current-carrying and non-current-carrying parts and between contact and control circuit 1,000 VAC, 50/60 Hz for 1 minute between non-continuous contacts Service life Mechanical 10 million operations minimum (under no load, at 1,800 operations/hour) Electrical 100,000 operations minimum at maximum ratings 2