Digital Display (14 mm) M7E CSM M7E(14mm) DS E 5 1 New Models with Blanking Function Added to the Series Single-color (red or green) and two-color (red or green selectable) displays with a character height of 14 mm are available for a variety of applications and locations. Miniature design with a 43-mm depth is perfect for saving space in equipment and devices. Wide-range power supply from 12 to 24 VDC. Negative sign ( ) display with signal codes is possible for Decimal-display Models. Models with zero suppression function available. Model Configuration Unit Configuration Unit Display Unit Displays units with text and symbols 1. Display Unit (see face plates) with a surface- Displays +, , 1 lighting LED. and . (decimal point). Connector Facilitates maintenance and inspection. Available with soldered Decimal Display Unit terminals or with PCB terminals. Displays 0, 1, 2, .9, and . (decimal point) with a character height of 14.2 mm. Spacer Used to separate displays and to allow space for changes in Hexadecimal Display Unit specifications. Available in Displays 0, 1, 2, .9, A, B, F, Used for panel mounting. black and in light gray. End Plate (Right) and . (decimal point) Right and Left Plates form a with a character height of 14.2 mm. pair (available as sets only). End Plate (Left) Black or light gray. 1M7E Ordering Information List of Models Display Display Type Model Connectable PLCs contents color Model with Zero Model with M7E model PLC output method Suppression Blanking (See note 1.) (See note 2.) Display Type Static output Dynamic contents output 1 Red Positive --- M7E-01BRP2 PNP NPN output output Negative --- M7E-01BRN2 1, Positive Dynamic output --- M7E-01BRD2 decimal Green Positive --- M7E-01BGP2 Negative Negative --- M7E-01BGN2 Dynamic output Dynamic output --- M7E-01BGD2 Hexa- Positive decimal Decimal Red Positive M7E-01DRP2 M7E-01DRP2-B Negative Negative M7E-01DRN2 M7E-01DRN2-B Unit --- (only voltage imposed) Dynamic output M7E-01DRD2 M7E-01DRD2-B : Connectable Green Positive M7E-01DGP2 M7E-01DGP2-B : Not connectable Negative M7E-01DGN2 M7E-01DGN2-B : Connectable (See note.) Dynamic output M7E-01DGD2 M7E-01DGD2-B Note: Connectable but an external resistor is required and Red/green Negative M7E-01DRGN2 M7E-01DRGN2-B only 24 VDC must be supplied. (two colors) Refer to External Connections on page 9 and 10 for details. Hexadeci- Red Positive M7E-01HRP2 M7E-01HRP2-B mal Negative M7E-01HRN2 M7E-01HRN2-B Green Positive M7E-01HGP2 M7E-01HGP2-B Negative M7E-01HGN2 M7E-01HGN2-B Display Display Logic Model contents color Unit Red --- M7E-01UR2- Note: 1. Models with zero suppression are blank only when the display is 0 (See note 3.) and the decimal is OFF by wiring as shown on page 12. 2. Models with blanking enable turning OFF a user-specified display Green --- M7E-01UG2- (0 to 9, a to f) by inputting a signal to the blank input terminal. (See note 3.) 3. The symbol in the box ( ) indicates the code for the display contents. Refer to page 13. Connector Accessories (Order Separately) Terminal Model End Plate Solder NRT-C terminal Case color Item Model Light gray M7E-012M Black M7E-012M-1 Solder NRT-CN Note: The Right and Left Plates form a pair. terminal Spacer Case color Item Model PCB terminal NRT-CP Light gray M7E-012PA Black M7E-012PA-1 Mother Board Type Number of digits Model Static 4 M7E-01MB4-S2 Static 3 M7E-01MB3-S2 Static 2 M7E-01MB2-S2 Note: Refer to M7E Mother Board for Display Units (Character Height: 14 mm) for details. 2