M8PHWS Omron

Proximity Sensor with All-stainless Housing E2FM CSM_E2FM_DS_E_4_8 Highly Durable Proximity Sensor for Tough Environments Completely stainless-steel housing Aluminum chip immunity Embedding installation to metal (steel) fittings Chemical resistance certified by Ecolab Europe Lineup includes pre-wire models and DC 3-wire NPN output models with fluororesin coating. Be sure to read Safety Precautions on page 9. For the most recent information on models that have been certified for Note: Models with a fluororesin coating also use vinyl chloride for the cable material safety standards, refer to your OMRON website. and require separate protection. Features One-piece completely stainless-steel housing with a face thickness of 0.8 mm The face thickness is approximately 4 times that of previous models (E2ES) to enable sensing in even more 0.8 mm severe conditions than ever. Brush Test Continuous Impact Test Chemical and Detergent Proof The one-piece completely stainless- steel housing of the sensing section withstands the following chemicals better. Sodium chloride Gasoline After 3 Minutes Dilute sodium hydroxide Dilute hydrochloric acid Mineral oil Barium hydroxide E2ES E2FM Any many others The E2FM was The E2ES with a top wall thickness not penetrated Note: Cannot be used for explosion-proof after 250,000 of 0.2 mm was applications. penetrated after impacts (depth: E2FM E2EQ 0.26 mm). 10,000 impacts. (Spatter-resistant) More than 20 times the The stainless-steel head durability of the E2ES! means almost no wear when cleaned with a metal brush. 1E2FM Built-in Chip Immunity Chip immunity performance has been provided to greatly reduce false signals caused by spatter accumulation and other causes, almost eliminating the needs for cleaning, e.g., with metal brushes. Flush Mounting Extension distance Not influenced by surrounding installation environment. E2ES E2FM Note: When mounted in steel. Main Performance Comparison to Previous OMRON Products Face thickness Sensing distance Response frequency Ambient operating temperature E2FM E2ES E2FM E2ES E2FM E2ES E2FM E2ES M8 0.4 mm --- M8 1.5 mm --- M8 200 Hz --- 25 to 70C 0 to 50C M12 0.8 mm --- M12 2.0 mm --- M12 100 Hz --- M18 0.8 mm 0.2 mm M18 5.0 mm 4.0 mm M18 100 Hz 12 Hz M30 0.8 mm 0.2 mm M30 10.0 mm 8.0 mm M30 50 Hz 8 Hz The chemical resistance has been certified by Ecolab Europe Ecolab GmbH & Co. OHG This certificate is based on: P.O. Box 13 04 06 D-40551 Dsseldorf documented test procedures (test no.: F&E/P3-E Nr. 40-1) according to material resistance defined product descriptions certifies that for standardized cleaning procedure Test procedure Ecolab-test F&E Nr. 40-1 Product specifications: OMRON Manufacturing of Germany GmbH Carl-Benz-Strasse 4 Dipping test: P3-topax 56: 71154 Nufringen Complete immersion in solutions/liquid Acid foam cleaning substance for food and beverage industry Test period: P3-topax 66: 14 days Alkaline foam cleaning detergent with active material resistance tests Temperature: chlorine for machine cleaning in food and beverage industry room temperature (constant) P3-topax 91: Analysis: were performed with cleaning substances P3-topax 56, P3-topax 66, P3-topax 91 and Visual judgement like swelling, brittleness, Neutral disinfection agent based on demineralized water as a zero reference factor. discoloring quaternary ammonium compounds (QAV) for the food industry compared to zero-reference factor The material resistance of the tested series (demineralized water) Photometric documentation Inductive Proximity Sensor E2FM to the P3 products used in the test can be considered to be positive according to the cleaning procedure mentioned overleaf. Cleaning plan for food and beverage industry* Rinsing with water 40 50C Dsseldorf, 14th February 2006 Rinsing with low pressure. Rinsing from top to bottom in the direction of the drains. Cleaning of the drains. Foaming from bottom to top Ecolab GmbH & Co. OHG alkaline: P3-topax 66 2 5 % daily acid: P3-topax 56 2 % on demand i.V. i. V. temperature: cold up to 40C contact time: 15 min. recommended Thomas Tyborski Reimund Laaff Rinsing with water 40 50C Rinsing from top to bottom with low pressure Spray disinfection P3-topax 91 1-2 %, 30 -60 minutes *short description 2 Workpiece Workpiece