MKS1XTIN-10 AC230 Omron

General Purpose Power Relays MKS-X MK-S-series Relays with AC and DC Load switching Models Models for DC Loads can switch 220 VDC, 10 A (resistive). Models for AC Loads can switch 250 VAC, 15 A (resistive). Lineup includes models with 1FormA and 1FormA+1FormB contact arrangements. Models available with operation indicators and built-in test buttons. Standards: UL/CSA, IEC (TV certification) RoHS compliant. Ordering Information List of Models Models for DC Loads Models for AC Loads Contact form SPST-NO SPST-NO/SPST-NC SPST-NO SPST-NO/SPST-NC Type Model Model Model Model Standard MKS1XT-10 MKS2XT-11 MKS1T-10 MKS2T-11 Built-in Operation Indicators MKS1XTN-10 MKS2XTN-11 MKS1TN-10 MKS2TN-11 Test Button MKS1XTI-10 MKS2XTI-11 MKS1TI-10 MKS2TI-11 Test Button and Built-in Operation Indicators MKS1XTIN-10 MKS2XTIN-11 MKS1TIN-10 MKS2TIN-11 Note: 1. When ordering, add the rated voltage to the model number. Rated voltages are given in the coil ratings table in the specifications. Example: MKS2XTIN-11 AC240 Rated voltage 2. Refer to Terminal Arrangement and Internal Connections for all wiring diagrams. Accessory (Order Separately) Connecting Socket and Hold-down Clips Classifications Built-in diode Socket Hold-down Clip Back-connecting Socket PCB Mount No P7M-06P No P7MF-06 PYC-A2 Front-connecting Socket DIN Track or Panel Mount Yes P7MF-06-D Note: 1. The P7M-06P, P7MF-06, and P7MF-06-D can be used with models for DC loads with an SPST-NO or SPST-NO/SPST-NC contact form or with models for AC loads with an SPST-NO or SPST-NO/SPST-NC contact form. 2. The P7MF-06-D has a built-in diode and can thus be used only with Relays with DC operating coils. Do not use it with a Relay with an AC operating coil. 3. Refer to Gang Mounting in the Safety Precautions section for the conditions required to gang mounti multiple relays side-by-side. 4. Use the Clips to securely mount the Relay and prevent it from falling due to vibration or shock. General Purpose Power Relays MKS-X 1Specifications Contact Ratings Models for DC Loads Contact form SPST-NO SPST-NO/SPST-NC Model MKS1XT(I)(N)-10 MKS2XT(I)(N)-11 Load Inductive load Inductive load Resistive load Resistive load Item L/R = 7 ms DC13 class L/R = 7 ms DC13 class Contact configuration NO Double-break Double-break NC --- Single-break Contact material AgSnIn AgSnIn Rated load NO 10 A, 220 VDC 5 A, 220 VDC 0.4 A, 220 VDC 5 A, 220 VDC 3 A, 220 VDC 0.2 A, 220 VDC NC --- 2 A, 220 VDC 0.3 A, 220 VDC 0.1 A, 220 VDC Rated carry current NO 10 A 5 A NC --- 2 A Max. switching voltage NO 220 VDC 220 VDC NC --- Max. switching current NO 10 A 5 A NC --- 2 A Max. switching capacity NO 2,200 W --- --- 1,100 W --- --- (reference value) NC --- 440 W --- --- Note: 1. If the L/R of an inductive load exceeds 7 ms with a Model for a DC Load, the arc interruption time must be less than approximately 50 ms to use the Relay. Design the circuit so that the arc interruption time is 50 ms or less. 2. These values apply to a switching frequency of 30 times per minute. Models for AC Loads Contact form SPST-NO SPST-NO/SPST-NC Model MKS1T(I)(N)-10 MKS2T(I)(N)-11 Load Resistive load Resistive load Item Contact configuration NO Double-break Double-break NC --- Single-break Contact material AgSnIn AgSnIn Rated load NO 15 A, 250 VAC 15 A, 250 VAC NC --- 5 A, 250 VAC Rated carry current NO 15 A 15 A NC --- 5 A Max. switching voltage NO 250 VAC 250 VAC NC --- Max. switching current NO 15 A 15 A NC --- 5 A Max. switching capacity NO 3,750 VA 3,750 VA (reference value) NC --- 1,250 VA Note: These values apply to a switching frequency of 20 times per minute. 2 General Purpose Power Relays MKS-X