NX-Series NX701 CPU Units NX701- P 44 I -E-01 Machine Automation Controller NX series *1 Flagship controller with industry s fastest processing speed *2 and large memory capacity for variables of up to 258 MB . Ideal for large-scale, fast, and highly-accurate control with up to 256 axes. NX701- Features Architecture based on Intel Core i7 quad-core processor for fast execution of double precision floating point arithmetic instructions as well as basic instructions. Integration of Logic and Motion in one CPU. Conforms to IEC 61131-3 (JIS B 3503) standard programming and PLCopen function blocks for Motion Control. Programming with variables allows users to create complex programs efficiently. Fast and accurate control by synchronizing all EtherCAT devices, such as vision sensors, servo drives, and field devices, with the PLC and Motion Engines. Two 1 Gbps EtherNet/IP ports embedded. Large-capacity memory for variables, up to 258 MB, enables data collection and analysis in parallel with device control. Offers speed without compromising on reliability and robustness expected from PLCs. Complete RAS functions: Transmission frame error check, timeout, bus diagnosis, Watchdog (WDT), memory check, and topology check, etc. Ordering Information International Standards The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, CE: EC Directives, RCM: Regulatory Compliance Mark, and KC: KC Registration. Contact your OMRON representative for further details and applicable conditions for these standards. NX701 CPU Units Specifications Current (Power) Product Name Model Standards Number of consumption Program capacity Memory capacity for variables motion axes NX701 CPU Units 256 NX701-1700 4 MB: Retained during power interruption 40 W (including SD UC1, RCM, CE, 80 MB 256 MB: Memory Card and KC Not retained during power End Cover) interruption 128 NX701-1600 *1. According to OMRON investigation in February 2015. *2. The total number of bytes of retained and non-retained variables. Sysmac is a trademark or registered trademark of OMRON Corporation in Japan and other countries for OMRON factory automation products. Intel, the Intel logo, Intel Core i7 are trademarks of Intel Corporation in the U.S. and/or other countries. Windows is registered trademarks of Microsoft Corporation in the USA and other countries. EtherCAT is a registered trademark of Beckhoff Automation GmbH for their patented technology. TM TM EtherNet/IP , DeviceNet are trademarks of the ODVA. Other company names and product names in this document are the trademarks or registered trademarks of their respective companies. 1NX701 Recommended EtherCAT and EtherNet/IP Communications Cables For EtherCAT, use a shielded twisted-pair cable (double shielding with aluminum tape and braiding) of Ethernet category 5 (100BASE-TX) or higher, and use straight wiring. For EtherNet/IP, required specification for the communications cables varies depending on the baud rate. For 100BASE-TX/10BASE-T, use an STP (shielded twisted-pair) cable of Ethernet category 5 or higher. You can use either a straight or cross cable. For 1000BASE-T, use an STP (double shielding with aluminum tape and braiding) cable of Ethernet category 5e or higher. You can use either a straight or cross cable. In the table, materials indicated available for EtherNet/IP 100BASE-TX are available for both of 100BASE-TX and 10BASE-T. Cable with Connectors Recommended Cable length (m) Item Model manufacturer *1 Standard type Cat egory 6a OMRON 0.3 XS6W-6LSZH8SS30CM-Y Cable with Connectors on 0.5 XS6W-6LSZH8SS50CM-Y Wire Gauge and Number of Pairs: Both Ends (RJ45/RJ45) 1 XS6W-6LSZH8SS100CM-Y AWG27, 4-pair Cable Cable Sheath material: LSZH *2 2 XS6W-6LSZH8SS200CM-Y Cable color: Yellow *3 3 XS6W-6LSZH8SS300CM-Y 5 XS6W-6LSZH8SS500CM-Y Rugged type Cat egory 5 OMRON 0.3 XS5W-T421-AMD-K Cable with Connectors on 0.5 XS5W-T421-BMD-K Both Ends (RJ45/RJ45) 1 XS5W-T421-CMD-K 2 XS5W-T421-DMD-K 5 XS5W-T421-GMD-K 10 XS5W-T421-JMD-K Products for EtherCAT OMRON 0.3 XS5W-T421-AMC-K Rugged type Cat egory 5 Cable with Connectors on 0.5 XS5W-T421-BMC-K Both Ends (M12/RJ45) Wire Gauge and Number of Pairs: 1 XS5W-T421-CMC-K AWG22, 2-pair Cable 2 XS5W-T421-DMC-K 5 XS5W-T421-GMC-K 10 XS5W-T421-JMC-K OMRON 0.3 XS5W-T422-AMC-K Rugged type Cat egory 5 Cable with Connectors on 0.5 XS5W-T422-BMC-K Both Ends (M12 L/RJ45) 1 XS5W-T422-CMC-K 2 XS5W-T422-DMC-K 5 XS5W-T422-GMC-K 10 XS5W-T422-JMC-K *1. Standard type cables length 0.2, 0.3, 0.5, 1, 1.5, 2, 3, 5, 7.5, 10, 15 and 20m are available. Rugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15m are available. *2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use. *3. Cables colors are available in blue, yellow, or Green Note: For details, refer to Cat.No.G019. Power Supply Units Options Power 24-VDC Product Name supply Model Standards Maintenance Total power Output service RUN voltage forecast consumption capacity power output monitor supply AC Power 100 to 240 NX-PA9001 150 VA 90 W No Yes No Supply Unit VAC UC1, N, L, CE DC Power 70 W No Yes No 24 VDC 85 VA NX-PD7001 Supply Unit 2