New Product Push-In Plus Terminal Block Sockets PYF- -PU/P2RF- -PU Sockets with Push-In Plus Terminal Blocks Reduce Wiring Time for Relays and Timers Wiring time is reduced by 60%* in comparison with traditional screw terminals. No screw loosening means maintenance-free application. Light insertion force and strong pull-out strength to achieve both less wiring work and high reliability. Hand-free structure that holds an inserted screwdriver to achieve easier wiring work for stranded wires. Two wires can be independently inserted into each terminal hole. DIN Track mounting or screw mounting. Use with MY and G2R-S relays H3RN-B, H3Y-B, H3YN-B timers and K7L- B liquid leak detector * According to OMRON actual measurement data from November 2015. For the most recent information on models that have been Refer to Safety Precautions on page 6. certified for safety standards, refer to your OMRON website. Features Coil terminals and contact terminals are completely separated in an organized wiring layout. A Release Lever is provided as a standard feature. DIN terminal numbers are indicated. The double fixture rail with DIN hook tabs attached to the top and bottom lets you mount the Socket from either the top or bottom. Front-in short bar enables easy installation without interference in duct when wiring. Please refer short bar correspondence table in page 5 for further information of short bar. There are screw mounting holes in the DIN hooks on the PYF- -PU and P2RF- -PU. Pull out the DIN hook tabs to mount the Sockets with screws. The fixture rails can be DIN hook tab (the fixture rail) pulled out to mount the Contact terminals (commons) Relays with screws. Contact short bar insertion holes Double NO contact terminals fixture NC contact terminals rails Release lever (standard feature) Coil short bar insertion holes Back of Push-In Plus Terminal Block Socket Coil terminals 1PYF- -PU/P2RF- -PU Ordering Information Sockets Socket Applicable model (typical example) No. of poles Model * MY2 2 PYF-08-PU General Purpose Relays MY Series MY4 4 PYF-14-PU H3Y(N)-2-B 2 PYF-08-PU-L H3Y Series Timers H3YN Series H3Y(N)-4-B 4 PYF-14-PU-L General Purpose Relays G2R- -S (S) Series G2R-1-S (S) 1 P2RF-05-PU Timers H3RN Series H3RN-1-B General Purpose Relays G2R- -S (S) Series G2R-2-S (S) Timers H3RN Series H3RN-2-B 2 P2RF-08-PU Liquid Leakage Sensors K7L Series K7L- B Note: * The PYF- -PU-L Sockets do not have release levers. Accessories (Order Separately) Short Bars Pitch Applicable models No. of poles Colors Model * Minimum order (quantity) 2 PYDN-7.75-020 3 PYDN-7.75-030 PYF- -PU and 7.75 mm P2RF- -PU Red (R) 4 PYDN-7.75-040 Blue (S) 10 20 PYDN-7.75-200 Yellow (Y) 31.0 mm PYF- -PU 8 PYDN-31.0-080 15.5 mm P2RF- -PU 8 PYDN-15.5-080 Note: Use the Short Bars for crossover wiring within one Socket or between Sockets. * Replace the box ( ) in the model number with the code for the covering color. Labels Parts for DIN Track Mounting Minimum order Type Model Minimum order (quantity) Applicable models Model (sheet) 1 m PFP-100N (quantity per sheet) DIN Tracks --- 0.5 m PFP-50N PYF- -PU and 5 XW5Z-P4.0LB1 P2RF- -PU (1 sheet/60 pieces) End Plate * PFP-M 10 Spacer PFP-S Refer to your OMRON website for details on the PFP- . * When mounting DIN rail, please use End Plate (Model PFP-M). Ratings/Characteristics Characteristics PYF- -PU(-L) P2RF- -PU Item Model PYF-08-PU (-L) PYF-14-PU (-L) Item Model P2RF-05-PU P2RF-08-PU Ambient operating temperature 40 to 70C Ambient operating temperature 40 to 70C Ambient operating humidity 5 to 85% Ambient operating humidity 5 to 85% Continuous carry current * 10 A 6 A Continuous carry current * 10 A 6 A Between contact terminals Between contact terminals 2,000 VAC, 1 min 2,000 VAC, 1 min 1,000 VAC, 1 min 1,000 VAC, 1 min of same polarity of same polarity Dielectric Between contact terminals Dielectric Between contact terminals 2,000 VAC, 1 min 2,000 VAC, 1 min --- 3,000 VAC, 1 min strength of different polarity strength of different polarity Between coil and Between coil and 2,000 VAC, 1 min 2,000 VAC, 1 min 4,000 VAC, 1 min 4,000 VAC, 1 min contact terminals contact terminals Insulation resistance 1,000 M min. (at 500 VDC) Insulation resistance 1,000 M min. (at 500 VDC) Weight (approx.) 80 g 87 g Weight (approx.) 40 g 45 g * The continuous carry current of 10 A for PYF-08-PU(-L) is for an * The continuous carry current of 10 A for P2RF-05-PU is for an ambient temperature of 55C. At an ambient temperature of 70C, ambient temperature of 55C. At an ambient temperature of 70C, the value is 7 A. the value is 7 A. The continuous carry current of 6 A for P2RF-08- PU is for an ambient temperature of 55C. At an ambient temperature of 70C, the value is 5 A. Applicable Standards UL 508, CSA C22.2 No.14, TV (EN 61984) Note: The continuous carry current of the PYF-08-PU and P2RF-05-PU for TV certification is 10 A at an ambient temperature of 55C and 7 A at an ambient temperature of 70C. The continuous carry current of the P2RF-08-PU for TV certification is 6 A at an ambient temperature of 55C and 5 A at an ambient temperature of 70C. 2