Switching Power Supply S82D High-Grade Power Supply for Demanding Industrial Applications Wide range of output voltages: 5 V or 12 V. Selectable 85 to 132 VAC or 170 to 264 VAC input voltage. Equipped with overvoltage and overload protection, remote sensing and remote control functions. Fan alarm signal warns of possible fan malfunction. For loads drawing high current, parallel connection of two power supplies possible. Two pairs of output terminals simplify wiring of two loads (300 W). Optional multiple output terminal available (600 W). 3-year warranty. Ordering Information SWITCHING POWER SUPPLIES Stock Note: Shaded models are normally stocked. Rated input voltageRated input voltage Power ratingsPower ratings Output Part numberPart number Voltage Current 120/240V120/240VACAC 300 W300 W 5 VDC 60 A S82D-3005 12 VDC 27 A S82D-3012 600 W600 W 5 VDC 120 A S82D-6005 12 VDC 53 A S82D-6012 Note: For mounting brackets and other accessories, refer to the Accessories Section on the next page. MODEL NUMBER LEGEND 1. Power ratings 2. Output voltage S82D - 30: 300 W 05: 5 V 12 60: 600 W 12: 12 V 24: 24 V 1 Switching Power Supply S82D ACCESSORIES (ORDER SEPARATELY) Stock Note: Shaded models are normally stocked. Item Mounting type Applicable power supply Part number Mounting bracketsMounting brackets Bottom mountingBottom mounting S82D-30 S82Y-D30B S82D-60 S82Y-D60B Side mountingSide mounting S82D-30 S82Y-D30S S82D-60 S82Y-D60S Terminal expansion bracket S82D-60 S82Y-D60T Connection kitConnection kit ParallelParallel S82D-30 S82Y-D30A S82Y-D60A S82D-60 FanFan S82D-30 S82YS82Y-DF-DFANAN S82D-60 Specifications Power rating 300 W 600 W Efficiency (typical) 74% to 84% (depending on types) Life expectancy 10 yrs. min. (used at 40C at the rated input with a 50% load) The life expectancy of the fan is lower. Input Voltage (AC only) 120 V (85 to 132 V) or 240 V (170 to 264 V) selectable Frequency 47 to 450 Hz Current (with rated I/O)Current (with rated I/O) 100-V input 8 A max. 14 A max. 200-V input 4 A max. 7 A max. Leakage current (with rated I/O)Leakage current (with rated I/O) 100-V input 0.5 mA max. 200-V input 1 mA max. Inrush current (with rated I/O)Inrush current (with rated I/O) 100-V input 25 A typ. 30 A typ. 200-V input 50 A typ. 60 A typ. Noise filter Yes Output Voltage fluctuation 3% max. (combined input, load, and temperature variations) Voltage adjustment range 10%, adjustable with variable resistor (V.ADJ) Ripple 2% (p-p) max. Input variation influence 0.4% max. (85 to 132 VAC/170 to 264 VAC input, 100% load) Load variation influence 0.8% max. (rated input, 0% to 100% load) Temperature variation influence 0.04%/C max. (0 to 50C, with rated input and output) Rise time 300 ms max. (output voltage rise to 90%, with rated input and output) Hold time 20 ms min. Additional functions Overload protection 120% of rated load current (typical), inverted L drop, automatic reset (output shut off after 5 s, reset by input reset) Overvoltage protection 120% of rated output voltage (typical), shut-off type, reset by input reset Fan alarm Relay output, connector SPST, 250 VAC, 1 A load resistance, but switching capacity is 125 VA Remote sensing Yes Remote control Yes Parallel connection Yes (This table continues on the next page.) 2 Switching Power Supply S82D