Switching Power Supply S82S Miniature DIN-track Mounting DC-DC Power Supplies 3- and 7.5-W models. Inputs:10 to 27 VDC (DC input) Outputs: 5, 12, 15, 24, 12, and 15 V. 65 mm depth enables mounting onto panels with 100 mm depth. RC Ordering Information Power ratings Output voltage Output current Model 3 W 5 V 0.6 A S82S-7305 12 V 0.25 A S82S-7312 15 V 0.2 A S82S-7315 24 V 0.13 A S82S-7324 7.5 W 5 V 1.5 A S82S-7705 12 V 0.6 A S82S-7712 15 V 0.5 A S82S-7715 24 V 0.3 A S82S-7724 12 V 0.3 A (+12 V)/0.2 A (12 V) S82S-7727 15 V 0.2 A (+15V)/0.2A (15 V) S82S-7728 Model Number Legend: S82S - 1.Input Voltage 3. Output Voltage 1 2 3 05: 5 V 7: 12 to 24 VDC 12: 12 V 15: 15 V 2. Power Ratings 24: 24 V 3: 3 W 27: 12 V 7: 7.5 W 28: 15 V 1S82S S82S Specifications Ratings/Characteristics Item DC input 3 W Single output Dual Output 7.5 W 7.5 W Efficiency (typical) 60% to 73% (Varies with specifications.) Life expectancy 8 yrs. min. (Used at 40C at the rated input with a 50% load. Input Voltage 10.2 to 27.6 VDC Current (with rated I/O) 0.6 A max. 1.2 A max. Noise filter Yes Output Voltage adjustment range 5% 5% Not possible (See note 1) Ripple 2% (p-p) max Input variation influence 0.5% max. (10.2 to 27.6 VDC input, 100% load) Load variation influence 1.5% max. 1.5% max. +V: 1.5% max. V: 3% max. Temperature variation 0.05%/C max. influence Additional Overload protection 105% min. of rated load current (typical), drop type, automatic reset function Other Ambient temperature Operating: See the derating curve in the Engineering Data section Storage: 25C to 65C Ambient humidity Operating: 25% to 85% Storage: 20% to 90% Dielectric strength 1,500 VAC, 50/60Hz for 1 min (between all inputs and outputs/GR terminal) Insulation resistance 100 M min. at 500 VDC (between all outputs and inputs/GR terminal) Vibration resistance Malfunction: 10 to 55 Hz, 0.375-mm single amplitude each in X, Y, and Z directions for 2 hours. 2 Shock resistance Malfunction: 294 m/s , 3 times each in X, Y, and Z directions Screw tightening torque 0.74 N m max. (See note 2) Output indicator Yes (green) Approved standards UL 508, CSA E.B.1402C Weight 150 g max. Note: 1. The settings for the output voltage must be within the following range: +V: 1% of the rated value V: 5% of the rated value 2. Do not press down on the terminal block with a force exceeding 75 N while tightening the terminals. 2