Subminiature Basic Switch SSG Global Subminiature Basic Switch Conforming to EN, UL, and CSA Standards A wide operating temperature range of -25C to 125C is available for at high-temperature use. PCB terminal models are resistant to flux. Even-pitched PCB terminals. Mounting hole size of M2.2. RoHS Compliant. Ordering Information Actuator Rating OF max. Solder Quick-connect PCB terminal ( 110) Pin plunger 5 A 153 gf SSG-5H SSG-5T SSG-5P 51 gf SSG-5H-5 SSG-5T-5 SSG-5P-5 0.1 A 153 gf SSG-01H SSG-01T SSG-01P 51 gf SSG-01H-5 SSG-01T-5 SSG-01P-5 Hinge lever 5 A 61 gf SSG-5L1H SSG-5L1T SSG-5L1P 20 gf SSG-5L1H-5 SSG-5L1T-5 SSG-5L1P-5 0.1 A 61 gf SSG-01L1H SSG-01L1T SSG-01L1P 20 gf SSG-01L1H-5 SSG-01L1T-5 SSG-01L1P-5 Simulated roller lever 5 A 61 gf SSG-5L3H SSG-5L3T SSG-5L3P 20 gf SSG-5L3H-5 SSG-5L3T-5 SSG-5L3P-5 0.1 A 61 gf SSG-01L3H SSG-01L3T SSG-01L3P 20 gf SSG-01L3H-5 SSG-01L3T-5 SSG-01L3P-5 Hinge roller lever 5 A 61 gf SSG-5L2H SSG-5L2T SSG-5L2P 20 gf SSG-5L2H-5 SSG-5L2T-5 SSG-5L2P-5 0.1 A 61 gf SSG-01L2H SSG-01L2T SSG-01L2P 20 gf SSG-01L2H-5 SSG-01L2T-5 SSG-01L2P-5 Note: SPST models are also available, but not listed in the above table. Model Number Legend SSG- 1 2 3 4 5 (see note) 1. Ratings 3. Contact Form 5. Maximum Operating Force 5: 5 A at 125 VAC None: SPDT None: 153 gf 01: 0.1 A at 125 VAC -2: SPST-NC -5: 51 gf -3: SPST-NO Note: These OF values are for the pin plunger models. 2. Actuator 4. Terminals None: Pin plunger H: Solder terminals T: Quick-connect terminals ( 110) L1: Hinge lever P: PCB terminals (SPDT only) L2: Hinge roller lever Consult Omron regarding the following: - SPST-NC and SPST-NO versions L3: Simulated roller lever (Solder and QC terminals, only) Subminiature Basic Switch SSG 109Specifications Characteristics Operating speed 0.1 mm to 1 m/second (pin plunger models) Operating frequency Mechanical: 400 operations per minute max. Electrical: 30 operations per minute max. Insulation resistance 100 M Contact resistance 153 gf: SSG-5 models : 30 m max. SSG-01 models: 50 m max. 51 gf: SSG-5 models: 50 m max. SSG-01 models 100 m max. Dielectric strength (See note 2) 1,000 VAC (600 VAC for SSG-01H and SSG-01T), 50/60 Hz for 1 minute between contacts of same polarity 1,500 VAC, 50/60 Hz for 1 minute between each terminal and ground and between each terminal and non-current-carrying metal parts 2 Vibration resistance (see note 3) Malfunction: 10 to 2,000 Hz, 196 m/s (Approx. 20G) 2 Shock resistance (see note 3) Malfunction: 490 m/s (approx. 50G) max. Degree of protection IEC IP40 Degree of protection against Class I electric shock Proof tracking index (PTI) 175 Ambient operating temperature -25 to 125C (at 60% RH max.) with no icing or condensation Ambient operating humidity 85% max. (for 5C to 35C) Service life Mechanical: 10 million operations min. at 60 operations per minute Electrical: 200,000 operations min. at 30 operations per minute Weight Approx. 1.6 g pin plunger type Note: 1. Data shown are of initial value. 2. The dielectric strength values shown is measured using a separator between the switch and metal mounting plate. 3. For pin plunger models, the above values apply for use at the free position and total travel position. For the lever models, the values apply at the total travel position with contact separation < 10s max. Ratings General Ratings Resistive load Lamp load Inductive load Motor load Rated NC NO NC NO NC NO NC NO voltage 125 VAC 5 A (0.1 A) 1.5 A 0.7 A 3 A 2.5 A 1.3 A 250 VAC 3 A 1 A 0.5 A 2 A 1.5 A 0.8 A 8 VDC 5 A 2 A 5 A 3 A 14 VDC 5 A 2 A 4 A 3 A 30 VDC 4 A(0.1 A) 2 A 3 A 3 A 125 VDC 0.4 A 0.05 A 0.4 A 0.05 A 250 VDC 0.2 A 0.03 A 0.2 A 0.05 A Note: 1. The values in the parentheses are for the SSG-01. 2. The above current ratings are the values of the steady-state current. 3. Inductive load has a power factor of 0.7 min. (AC) and a time constant of 7 ms max. (DC). 4. Lamp load has an inrush current of 10 times the steady-state current. 5. Motor load has an inrush current of 6 times the steady-state current. 6. If the Switch is used in a DC circuit and is subjected to a surge current, connect a surge suppressor across the switch. 7. The electrical rating applies under the following test conditions: Ambient Temperature = 202C, Ambient Humidity = 655%, Operating frequency = 30 operations/minute 110 Subminiature Basic Switch SSG